Eminence LEGEND BP102 User Manual

Specication

Nominal Basket Diameter
Nominal Impedance*
Power Rating**
Watts
Music Program
Resonance
Usable Frequency Range***
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Thiele & Small Parameters

Resonant Frequency (fs)
DC Resistance (Re)
Coil Inductance (Le)
Mechanical Q (Qms)
Electromagnetic Q (Qes)
Total Q (Qts)
Compliance Equivalent Volume (Vas)
Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)

Efciency Bandwidth Product (EBP)

Maximum Linear Excursion (Xmax)
Surface Area of Cone (Sd)
Maximum Mechanical Limit (Xlim)

10", 254mm

8 ohms

200W
400W

35Hz

40Hz-2kHz

38 oz

0.312", 7.92mm

2", 50.8mm

35Hz

5.59

0.83mH

5.36

0.47

0.43

91.2 ltr/3.2 cu. ft.

207cc

0.54mm/N

10.0 T-M

38 grams

6.2mm

334.5cm

10.0mm

The Art and Science of Sound

92

LEGEND BP102

Recommended for professional bass guitar applications in a sealed or vented enclosure.
Works well in single or multi driver designs.

75

2

Mounting Information

Recommended Enclosure Volume
Sealed
Vented
Overall Diameter

Bafe Hole Diameter

Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Net Weight
Shipping Weight

Materials of Construction

Coil Construction
Coil
Magnet Composition
Core Details
Basket Materials
Cone Composition
Cone Edge Composition
Dust Cap Composition

14-28 ltr/0.5-1 cu. ft.

25.5-62 ltr/0.9-2.2 cu. ft.

10.08", 256.1mm

9.05", 229.7mm

Fitted as Standard
Fitted as Standard

0.25", 6.4mm

9.66", 245.4mm

4.25", 108mm

8.9 lbs, 4 kg

9.1 lbs, 4.1 kg

Copper

Polyimide

Ferrite

Non-Vented

Pressed Steel

Paper

Cloth

Zurette

Please inquire about alternative impedances.

*

Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.

**

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.

***

Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/bafe | 2 ft. X 2 ft. bafe is built into the wall with the speaker mounted ush against a steel ring for minimum diffraction | Haer P1500 Trans-Nova amplier | 2700 cu.ft. chamber with

berglass on all six surfaces (three with custom-made wedges)