Eminence BASSLITE S2012 User Manual

The Art and Science of Sound

S2012

®

Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle | 2 ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with

Please inquire about alternative impedances.

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X12 enclosures.

BASSLITE

97

48Hz

150W

8 ohms

12", 304.8mm

Nominal Basket Diameter

Nominal Impedance*

Specification

300W

Power Rating**

Watts

Music Program

Resonance

4 oz

49Hz-4.5kHz

Usable Frequency Range***

Sensitivity

2", 50.8mm

0.28", 7.2mm

Magnet Weight

Gap Height

Voice Coil Diameter

5.1

5.5

0.53

Mechanical Q (Qms)

0.48

270cc

11.7 T-M

0.24mm/N

91 ltr/3.2 cu. ft.

Electromagnetic Q (Qes)

Total Q (Qts)

Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)

Mechanical Compliance of Suspension (Cms)

BL Product (BL)

48Hz

0.43mH

Resonant Frequency (fs)

DC Resistance (Re)

Thiele & Small Parameters

Coil Inductance (Le)

91

46 grams

Diaphragm Mass inc. Airload (Mms)

Efficiency Bandwidth Product (EBP)

5.2mm

Maximum Linear Excursion (Xmax)

2

519.5cm

Surface Area of Cone (Sd)

9.8mm

Maximum Mechanical Limit (Xlim)

5.1", 130mm

0.25", 6.4mm

12.03", 305.5mm

10.95", 278.1mm

Fitted as Standard

Fitted as Standard

31-35 ltr/1.1-1.3 cu. ft.

42.5-85 ltr/1.5-3 cu. ft.

Recommended Enclosure Volume

Sealed

Vented

Overall Diameter

Baffle Hole Diameter

Front Sealing Gasket

Rear Sealing Gasket

Mounting Information

Mounting Holes Diameter

11.59", 294.3mm

Mounting Holes B.C.D.

4.1 lbs, 1.9 kg

5.8 lbs, 2.6 kg

Depth

Net Weight

Shipping Weight

Copper

Polyimide

Coil Construction

Coil

Materials of Construction

Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.

*

**

Non-Vented

Neodymium

Pressed Steel

Magnet Composition

Core Details

Basket Materials

fiberglass on all six surfaces (three with custom-made wedges)

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.

***

Cloth

Paper

Solid Composition Felt

Cone Composition

Cone Edge Composition

Dust Cap Composition