Eminence BASSLITE S2010 User Manual

The Art and Science of Sound

S2010

®

Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle | 2 ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with

Please inquire about alternative impedances.

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures.

BASSLITE

2

11.9 T-M

BL Product (BL)

135

33 grams

Diaphragm Mass inc. Airload (Mms)

Efficiency Bandwidth Product (EBP)

4.0mm

Maximum Linear Excursion (Xmax)

350.1cm

Surface Area of Cone (Sd)

8.0mm

Maximum Mechanical Limit (Xlim)

8 ohms

10", 254mm

Nominal Basket Diameter

Nominal Impedance*

Specification

300W

54Hz-4kHz

Power Rating**

Watts

Music Program

Resonance

Usable Frequency Range***

Sensitivity

2", 50.8mm

0.28", 7.2mm

Magnet Weight

Gap Height

Voice Coil Diameter

4 oz

96.2

46Hz

150W

5.02

4.16

0.34

Mechanical Q (Qms)

0.31
140cc

0.36mm/N

63.4 ltr/2.2 cu. ft.

Electromagnetic Q (Qes)

Total Q (Qts)

Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)

Mechanical Compliance of Suspension (Cms)

46Hz

0.47mH

Resonant Frequency (fs)

DC Resistance (Re)

Thiele & Small Parameters

Coil Inductance (Le)

N/A

Copper

Polyimide

0.25", 6.4mm

4.25", 108mm

3.5 lbs, 1.6 kg

10.08", 256mm

9.05", 229.9mm
Fitted as Standard

20-51 ltr/0.7-1.8 cu. ft.

Recommended Enclosure Volume

Sealed

Vented

Overall Diameter

Baffle Hole Diameter

Mounting Information

Front Sealing Gasket

9.66", 245.4mm

Rear Sealing Gasket

Mounting Holes Diameter

Mounting Holes B.C.D.

4.6 lbs, 2.1 kg

Depth

Net Weight

Shipping Weight

Coil Construction

Coil

Materials of Construction

Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.

*

**

Non-Vented

Neodymium

Pressed Steel

Magnet Composition

Core Details

Basket Materials

fiberglass on all six surfaces (three with custom-made wedges)

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.

***

Cloth

Paper

Solid Composition Felt

Cone Composition

Cone Edge Composition

Dust Cap Composition