Straight cool/heat pump*
Nominal Circuit Capacities: WLH 9,000, 12,000,
18,000, 24,000 Btuh and WLC (only) 30,000 & 36,000 Btuh
* Heat Pump only available for 9,000-24,000 Btuh units.
ProduCt dEsCrIPtIon
The AmericaSeries WLC/WLH offers a contemporary
design, ductless type evaporator combining attractive
appearance in any decor and high efciency conditioning for small to medium size commercial or residential
spaces. The WLC/WLH is equipped with unit mounted
infrared compatible controls which also supports 24V
remote wall thermostat operation. Optional hand held
remote is available.
Heat Pump models provide up to a nominal 24,000 Btuh
of cooling and heating. Electric heat options are available
for up to 5KW of supplemental heat.
This American-made evaporator offers ease of installation, operation, and service. It can be matched with
EMI’s S1C/S1H 09-24 and S1C 30-36 Btuh Single-Zone
Condensing Units, the S2C side discharge Multi-Zone
Condensing Unit, or the T2C, T3C, and T4C top discharge
Multi-Zone Condensing Units.
stAndArd FEAturEs
Unit Mounted Control:
• Large LCD Backlit Display
• Single unit mounted control package, congurable
to either unit mount or remote wall thermostat
operation, reducing model number or SKU’s
SpecificationS and performance
required.
• Universal control can be used in cooling only,
cooling with electric heat, heat pump, or heat pump
with second stage electric heat applications.
Wlc/Wlh
high Wall eVaporator
P/N 240005842, Rev. A [05/08]
• Operational range set point temperature
adjustable between 55°F and 90°F in one-degree
increments.
• Infra red compatible control allows use of optional
IR hand held controller
notE: Unit mounted controls are fully functional
without the handheld remote.
• Operation modes include Heat, Cool, Dry, Fan and
Auto Change-over.
• Fan Operation – Auto/On. High or Low speed fan
• Fan Purge – Fan remains on for 60 seconds after
Heat/Cool call is dropped for improved efciency
(Auto mode only)
• Room air sampling: Selectable time intervals
ensures the fan will cycle on periodically, in Auto
Fan Mode.
Benefit: Helps to eliminate room temperature
stratication.
• Selectable Fahrenheit (°F) or Centigrade (°C)
temperature scale.
• Dry mode – Operates cooling and electric heat
simultaneously to remove humidity. Optional
electric heat must be selected.
• Anti-Short Cycle Compressor Protection.
• Minimum on time for heating and cooling.
Benet: Helps eliminate room temperature drop
and system short cycling.
• Freeze Protection – Prevents evaporator freeze up.
• Test operation – Allows ease of testing after
installation (all timers are eliminated).
• Non-volatile back-up memory
Benefit: Control settings are maintained for an
indenite period during a power outage. When power
is restored the equipment will resume operation after
a three-minute compressor time delay .
• 7-day programmable with copy feature.
• Filter change indicator: A timer feature that
indicates the lter should be changed according to
the selected time.
• Motorized supply louver with optional sweep or
six stationary settings.
• Modular design – reduces parts required for control
1
Web: http://www.enviromaster.comEnviromaster International LLC
WLC/WLH FEAturEs And oPtIonAL EquIPMEnt
notE: Due to ongoing development programs, design and specications may change without notice.
stAndArd FEAturEs Continued
package. Deco panel, relay board, ribbon cables and
microprocessor all combined into one package.
• Integral condensate pump safety-switch connection
where-by the microprocessor monitors the condensate
pump safety switch and displays an error code when
a fault occurs. (Applys only with optional condensate
pump)
• CEC (California Energy Commission) compliant
• Condensate drain pan over ow protection
Cabinet Features:
• Durable ABS plastic cabinet with a galvanized steel
sub-chassis.
• Easily accessible, washable, reusable, nylon mesh lter.
• Horizontal discharge louver, constructed of high
temperature ABS plastic, that can be set to oscillate,
or can be parked in various pre-set positions.
• Manually adjustable vertical discharge ns.
• Easy access to pipe chase area from cabinet bottom.
Benet: Allows piping connections and condensate
pump installation with the unit mounted on the wall.
• Easily removable end-cap for access to control area
for installation and service.
• Condensate drain pan constructed of galvanized steel
(G90U), with anti-corrosion coating.
• Modular snap-in, 7-day programmable control with
large backlit LCD display, a “Change lter” display
feature and selectable Fahrenheit (Fº), or Centigrade
(Cº) temperature scale.
• Operational range between 55ºF to 90ºF, adjustable
in one-degree increments.
oPtIonAL EquIPMEnt
• Condensate pump (eld installed)
• 24V remote wall thermostat
• Electric heat with automatic reset high temperature
cutout and redundant high temperature fuse link
(when heat option is selected)
• Hand held infrared controller.
InstALLEr suPPLIEd ItEMs
• Low voltage wiring
• Power wiring
• Mounting screws and fasteners
• Condensate piping
• Refrigerant piping (if not supplied)
• Refrigerant (for interconnect charge)
WLC/WLH dIMEnsIons And sPECIFICAtIons
notE: Due to ongoing development programs, design and specications may change without notice.
sHIPPIng WEIgHt
Model Lbs.
WLH09/12
WLH18/24
WLC30/36
“B”
Height
Made in rome, new York, usAthe ductless split system of Choice
A
1 ½”
2”
B
C
WLC/WLH PHYsICAL dIMEnsIons
D
E
5 ¼”
4 ⅜”
“A”
Model
WLH09 9 ⅞” 15 ¼” 38 ½” 24” 26 ½”
WLH12 9 ⅞” 15 ¼” 38 ½” 24” 26 ½”
WLH24 9 ⅞” 15 ¼” 48 ½” 34” 36 ½”
WLC30 9 ⅞” 15 ¼” 58 ½” 44” 46 ½”
WLC36 9 ⅞” 15 ¼” 58 ½” 44” 46 ½”
2
depth
WLC/WLH
“C”
Length
70
108
TBD
“d”
Mounting
Bracket
Clearance
“E”
tubing
Access
Clearance