Emgeton Noble User Manual
- 2 -
English - User Guide
- 3 -
CONTENTS
1. Safety precautions 4
2. Getting started 5
3. Overview of the phone 7
4. Basic functions 13
5. Standby screen and main menu 16
6. Accessories 27
7. Troubleshooting 28
8. Technical specifications 29
9. Care and maintenance 30
10. Declaration of Conformity 31
11. Certification information (SAR) 31
Contents of the packing: Phone, Battery, Charger, Data cable, Headset, CD-ROM, User Guide, Warranty Certificate
- 4 -
112 is an emergency number for the whole EU.
1. Safety precautions
Please read the following instructions before using your mobile phone to ensure safe and efficient use.
interference.
It is not allowed to use the mobile phone in hospitals, research institutes, aircrafts and other places where energy emission may cause
Switch the phone off before boarding an aircraft and do not use it also on the ground without permission of aircraft staff.
Follow instructions to switch the phone off near petrol stations, chemicals and explosives.
If you suffer from heart disease, pay attention to vibrating and high volume of ringing.
Keep the phone and all its accessories out of reach from children.
Keep away from medical devices.
The phone contains metals which can irritate the skin and cause rash or eczema.
If you do not feel well after long usage of the phone (e.g. playing games), immeditely seek medical advice.
Do not use the device while it is raining and during a thunderstorm.
Your phone is not water-resistant. Keep it dry. Do not use the phone in areas with extreme temperatures. Keep away from direct sunlight.
While driving, use only the hands free kit for calls.
Use of non-original devices can cause damage to the phone and any defect caused by this will not be honored by the warranty.
be corrupted.
Non-original devices used in connection with the phone are not covered by the guarantee.
The device contains two integrated antennas. Covering of these antennas may cause weak signal and lower quality of calls.
Do not tamper with the device in any way. Should this product fail to operate properly, please contact our authorized service.
Do not charge the phone without a battery. Please switch off the phone before removing the battery. The data saved in the memory could
photos and recording sounds without approval can be penalized by law or regulations.
Charge the phone in areas with sufficient air circulation and avoid overheated areas , and from explosive or highly flammable materials.
Keep away from objects sensitive to magnetic fields, e.g. credit cards.
Do not use a wet cloth or strong detergents to clean the surface of the phone.
Your phone enables you to record photos and sounds. Use these functions according to the general regulations and restrictions. Tak in g
Protect the device from dropping or knocking. This type of handling can damage the surface and technical components inside.
Dispose of used batteries according to guidelines and instructions for the safe disposal of this kind of waste.
Notice:
Our company does not assume any responsibility for any loss or damage relating to this device if not used in accordance with the above-mentioned
recommendations. With regards to ongoing device development and improvements, the text of this User Guide can be modified. Our company reserves the
right to make changes and improvements of all products described in this document without prior announcement. Further, we reserve the right to make
changes in the text of this User Guide without prior notice.
discharge cycles. The battery can be charged and discharged hundreds of times.
battery will slowly lose its charge.
The device is powered by a Li-Ion battery. The battery achieves its ultimate capacity after three full charge and
Do not leave a fully charged battery connected to a charger, it may shorten its lifetime. If left unused, a fully charged
- 5 -
Use only original batteries and chargers.
2. Getting started
Insert SIM card and battery
1. Remove the back cover of the battery – press the lock on the top of the phone and remove the cover. Fig. 1. Fig. 1 Fig. 2 Fig. 3 Fig. 4
2. Remove the battery, Fig. 2.
3. Insert a SIM card into one of the slots, Fig. 3.
4. Open the memory card holder and insert the microSD card. Close the holder, Fig. 4.
5. Insert the battery with the label face up.
6. Put the back cover on the phone. First, arrange the cover on the phone, than press the lower part of the cover, until it
locks.
Notice:
SIM cards can be easily damaged by scratches! Protect their contacts from scratching. Do not bend the cards.
Battery information
- 6 -
Charging the battery
1. First charging cycle may last up to 4 hours.
2. Open the cover of the mini USB connector and connect the charger.
3. The phone can be charged while switched on or switched off.
4. Unplug the charger, when fully charged.
Insert microSD card
This device supports microSD cards. You will find the slot for microSD card in the lower part of the phone, near the SIM card
slots. 1. Open the holder of slot for memory cards.
2. Insert the memory card with the legend face up and close the holder.
The holder is protected by a mechanical lock. To loosen the lock, slide the cover up. To lock, slide the cover down.
1 – Power key 6 – Mini USB connector
2 – Volume key +/- 7 – Camera
3 – Earpiece 8 – Rear camera
4 – Front camera 9 – Loudspeaker
5 – Headset connector
- 7 -
3. Overview of the phone
10 – Left selection key [LS]
11 – Right selection key [RS]
12 – Up
13 – Back key
14 – Left
15 – OK
16 – Right
17 – Clear key
18 – [W-CDMA key] – SIM-1
19 – Down
20 – [GSM key] – SIM-2 Alphanumeric keys (0-9) * – star key [*]
- 8 -
# – pound key [#]
- 9 -
Press and hold 2-9 to call Fast dial
Press and hold 0 to enter “+“ for dialing a number in the international form
Main menu: Select appropriate item
Standby screen: Operate a function displayed above this key
Press and hold to lock the keypad
Main menu: Switch to the selected menu
While editing: View the menu of selected function
Standby screen: Operate a function displayed above this key
Main menu: Switch to previous screen
While editing: Switch to previous screen
Standby screen: Open the main menu
Main menu: Select a function or command
During call: Start the videocall
Standby screen: Open the function assigned to this key
Main menu: Move 1 item up
While editing: Move the cursor 1 line up
Standby screen: Open the function assigned to this key
Main menu: Move 1 item down
While editing: Move the cursor 1 line down
Standby screen: Open the function assigned to this key
While editing: Move the cursor 1 character left
Standby screen: Open the function assigned to this key
While editing: Move the cursor 1 character right
Standby screen: View list of all calls
Call and incoming call modes: Dial a number or answer call for SIM-1
Standby screen: View list of all calls
Call and incoming calls modes: Dial a number or answer call for SIM-2
Standby screen: Press and hold to switch on and off the phone
Press briefly to switch to SIM cards mode
While editing: Delete a character before the cursor
In the list of files: Delete sele cted file
Return to standby screen
(If the player or radio plays, it restores the player in the foreground on the standby screen)
While editing: Enter numbers, letters and symbols
Standby screen: Enter numbers and characters
Call mode: Press and hold 1 to call the Voice mail of SIM-1
Standby screen: Enter “*“
While editing: Change the input method
Standby screen: Enter “#“
Press to add a space (P) in dialed number
While editing: View list of symbols
Increase and decrease the volume of the loudspeaker
Standby screen: Start the application for taking photos
Left selection key [LS]
Right selection key
Selection keys (Each key has a
function)
[RS]
OK key
Up
Down
Left
Right
Navigation keys
W-CDMA key
GSM key
Power key
Clear key
Back key
Alphanumeric keys
* key
# key
Volume key +/-
Camera
Status icons
Fully charged
Level: discharged, almost
discharged, charged
1 Battery charge level
Number Meaning Description Icon
Charging (icons are blinking) Unread SMS SMS not sent
SMS memory full Unread MMS
2 SMS status
WAP request
MMS memory full
3 MMS status
Incoming call W-CDMA for
SIM-1
4 Incoming calls
- 10 -
Incoming call GSM for SIM-2 Incoming call W-CDMA and
GSM for SIM-1 and SIM-2 Profile Meeting, W-CDMA is
primary SIM
Profile Outdoors, W-CDMA is
primary SIM
Profile Driver, W-CDMA is
primary SIM
Profile Meeting, W-CDMA is
Phone profiles for W-
CDMA SIM-1
secondary SIM
Profile Outdoors, W-CDMA is
secondary SIM
Profile Driver, W-CDMA is
secondary SIM
Profile Meeting, GSM is primary
SIM Profile Outdoors, GSM is
Phone profiles for GSM
SIM-2
primary SIM
Profile Driver, GSM is primary
SIM Profile Meeting, GSM is
secondary SIM
Profil Outdoors, GSM is
- 11 -
secondary SIM
5
6
Profil Driver, GSM is secondary
SIM
7 USB connection USB cable connected
Bluetooth active
8 Bluetooth status
Bluetooth Handsfree connected
9 Network connection Connection established
No signal for SIM-1 Level of siganl for W-CDMA
network
10 Signal strength for SIM-1
Level of signal for GSM network No signal for SIM-2
11 Signal strenght for SIM-2
Level of siganl for GSM network
- 12 -
- 13 -
4. Basic functions
Your mobile phone supports both GSM and W-CDMA networks. You can make voice calls from both SIM cards, video calls
only from SIM-1 card.
Switch the device on and off
To switch the device on, press the Power key and hold it for approximately 3 seconds.
PIN and PUK codes
PIN and PIN2 codes protect your SIM card against misuse. If the PIN is entered incorrectly three times, the SIM card is
locked and it is required to enter the PUK code or PUK2 code. If they are also entered incorrectly ten times, the SIM card is
locked forever. All codes are in the documents for your SIM card.
Making a call
Enter the phone number on the keypad and select a SIM card by pressing [W-CDMA key] or [GSM key].
Fast dial
Up to 8 phone numbers can be saved in the list of fast dials. They are assigned to the number keys [2-9]. By pressing and
holding one of this number keys, a number assigned to this key will be dialed from the primary SIM card (can be set).
Speed choice
If you know the position of a phone number in the phone or on the SIM card, you can find it directly on the standby screen.
Enter the number position of the contact on the standby screen and press “*“ to find the phone number in the phone or “##“,
or “#*“ to find the phone number on the SIM card.
- 14 -
Call log
Your phone can save a review of the 20 last dialed, received and missed calls. To display the call log, press [W-CDMA key]
or [GSM key] keys.
International calls
Press and hold the 0 key until the „+“character is displayed. Enter then a country calling code without first two zeros followed
by the prefix of the region and the phone number.
Pause
To enter a pause in the dialed number, e.g. because of voice navigation system, press and hold the „#“ key until the letter „P“
is displayed.
Emergency call
You can dial the emergency call number 112 even if, the phone or SIM cards are locked or the cards are missing.
Incoming calls
During the incoming call, the phone indicates the SIM card from which the call is coming from. You can answer, reject or
ignor a call. To answer a call, press one of following keys: [LS], [W-CDMA key], [GSM key]. To stop the ringing or vibrating ,
press [OK]. To reject a call, press [RS]. If you set the option to answer the call with any key, you can answer the call with
any key except [RS], [OK] and Power key.
While calling
While calling, press [LS] to display the list of available functions.
Hold a call – press [LS] and select „Hold“. Press again [LS] to select the phone number from the address book, or enter a
new number. As soon as you have another call, switch between both by pressing [LS].
Mute – press [LS] and select „Mute“ to switch off the microphone. To switch on the microphone, press [LS] and select
„Unmute“.
- 15 -
Switch Bluetooth on – While calling, press [LS] and select „Enable Bluetooth“ to search for a compatible Bluetooth
headset.
Conference call
The phone allows to call up to 5 people at the same time.
1. Dial the first phone number
2. Press [LS] and select „Phone Book“ or „New call“ to select next phone number.
3. Enter the phone number and select „Call“. In this way the first called person joins the conference.
4. To add other participants, repeat steps 2 and 3. Note: This function depends on the network provider.
Private conversation during the conference
1. During the conference, press [LS] and select „Conference list“.
2. Select one or more participants that you want to talk privately to.
3. Press [LS] and select „Split call“. Unselected participants can still talk to each other.
4. Press [LS] and select „Conference“ to come back to the conference call.
5. To release a participant, press [LS] and select „Conference list“. Select the contact and press „End“.
Video call
During the video call (available only on SIM-1 card and supported networks), press [LS] to enter the video call menu . With
„Front camera“ and „Rear camera“ select the camera that the video will be sent from. With the item „Screen mode“ you can
zoom in or out your picture on the screen.
Videos
Use to play video files or sent files via Bluetooth or via MMS. Here,you can also move videos between the
- 16 -
phone and the memory card. 3GP and MP4 are supported formats.
Use to operate with sound files as in the case of video files. The phone supports AMR, SMF (MIDI), SMAF,
WAV, AAC, MP3, WMA, QCP and MMF formats.
The phone can work with pictures in JPEG, GIF, WBMP, BMP and PNG formats up to a maximum size of
1600×1200 pixels. 100 pictures in the case of GIF files.
Sound
Pictures
5. Standby screen and main menu
A lot of important information is displayed on the standby screen, e.g. missed calls, new messages, alarm clock and, to do
list. The screen of the main menu allows to enter all functions of the phone. Items are shown as a grid or a list. To enter the menu
from the standby screen, press [OK]. To select particular items, use cursor keys or keys [0-9], * and #.
The description of items in the menu follows:
My Files
Use to manage your files as pictures, video, music and other applications saved in the phone or in the memory card.
- 17 -
background while using another phone function.
the boxes to the target locations. In the second one, you move the balls to have five same balls in one line and
this line will then be cleared.
connect the headset which functions as the antenna at the same time. During the incoming call, the volume
turns automaticaly down and after finishing the call, it turns again up.
E-Cult Music player – allows to play sound files saved in the phone or on the memory card, also in the
Games – Your phone contains two embedded games: Boxman and Colored Ball. In the first game, you push
Java box – here you can install, delete and launch other Java applications.
FM radio – allows you to receive radio broadcasts in very high frequency. To listen to the radio, you have to
Phone Book
The phone book contains contacts saved in the phone and on both SIM cards. In addition to the existing phone numbers and
names, other phone numbers, e-mail addresses and photographs can be saved in the phone. You can dial numbers, send
SMS, MMS and e-mails directly from the phone book or move contacts between SIM cards and the phone. Predictive writing
enables to search in the phone book. To search for the name „Petr“, press only 7,3,8,7 instead of keys 7,3,3,8,7,7,7. To show detailed information about a contact, press [OK]. To dial the number via SIM-1, press [W-CDMA key], or to dial the
number via SIM-2, press [GSM key]. The phone enables you to save up to 1000 contacts with 3 000 phone numbers and 2 000 e-mail addresses. You can search
in these contacts by names, numbers or groups.
Log
Log allows to browse through information about calls and data transfers. You can view the list of 20 last missed, received and
dialed calls, the length of dialed and received calls, and the number of sent and received data in kilobytes.
Entertainment
The mobile operator provides you with this number.
Service centre – to set up the number of a centre which is responsible for sending SMS from SIM-1 and SIM-2.
Expiry period – to set up a time to delete an SMS that was sent, but undelievered.
Delivery reports – if activated, you receive messages confirming the delivery of SMS‘s you have sent.
Storage type – to set up, whether SMS messages will be saved on the SIM card or in the phone.
- 18 -
Broadcast – to set up, if so-called Reports from mobile operator network areas shall be activated.
Message
It is possible to create and read SMS, MMS and e-mail messages in this menu. To create an SMS, select in the menu „Message /SMS/ New“, enter the phone number of the receiver or find him in the
phone book with the [LS] key. By pressing the [Down] key, go to the text field for the content of the message and press [OK]
to open the text editor. After writing a message, press [OK] to return to the previous screen. To send the message, press
[OK] and select „Send via SIM-1“ or „Send via SIM-2“. To send the message to more receivers at once, separate the particular numbers with a semicolon (;).
All received messages are saved in the folder „Inbox“. When a message is received, the phone announces it and a number
of unread messages displays on the standby screen. You can answer from the menu to the received message or forward it to
someone else.
Unfinished messages or messages which have not been sent are saved in the folder „Drafts“, where it can be edited and
sent. Sent messages are in the folder „Sent“. If the sending of a message failed, it will be saved in the folder „Outbox“. The
message here can be read, edited, deleted and resent. Voice mail
The voice mail allows the calling person to leave a message in your absence. The phone displays an icon that you have a
new voice message. Contact your operator to know the number of the voice mail. Settings
MMS messages
- 19 -
MMS messages allow to receive and send multimedia messages with pictures, audio and video files. Before using this
function, set the internet acces via GPRS. Operating with MMS messages is very similar to SMS messages.
E-mails
E-mails operate in the same way. Messages with attachments can be sent, but only from SIM-1 and after configuration of
data connection and e-mail server. Settings
To set user´s information (name, e-mail address, reply-to address, user ID, password, SMTP user ID and password),
connection (POP3/SMTP server address and port, use SSL/TLS, incoming server type),and message preference (max. size,
leave copy on server POP3, signature, ...). To operate with e-mails, you can use many accounts, but only one can be active.
Video call
In this menu, a video call can be started or parameters for future video calls can be set. In settings, you can change image
quality (better or more fluent image), colour mode (colour, sepia, black&white), video settings (send live video or videoclip)
and automatic sound volume switch.
Flexaret Camera
Your phone contains an integrated digital camera for taking pictures and recording videos. Videos are saved in the folder
„Videos“ and photographs in the folder „Pictures“, which you find in My Files. Both pictures and videos can be sent in MMS
or as an attachement with an e-mail. The camera records video in 3GP format and saves photograhs in JPEG format.
The camera can be activated through this item in the menu or by pressing the [Camera] key. LCD display serves as a viewfinder of the camera. Hold the phone in a horizontal position with the [Camera] key up. To
change brightness, use [Up] and [Down] keys. To take photograph of a scene, press [OK]. By pressing [LS], enter to
settings. In Settings, you can define, which camera will take photographs, photo size, image quality, white balance, colour effects,
night mode, shooting mode and also switch between camera and video mode.
- 20 -
After taking a photograph of a scene, you can immediately save it to the folder „Pictures“ in My Files, delete it or send via
Bluetooth or MMS. Video recording
Press [Camera] key, than [LS] key and select „Video“ in the menu. Zoom with [Left] and [Right] key, edit brightness with
[Up] and [Down] key. To record a video, press [OK] or [Camera]. The phone announces the beginning of a recording with a
sound signal. To stop and restore recording, press [LS] key. To finish recording, press [OK]. In camera settings, you can change the camera which will shoot, video size, video quality, white balance and switch to
photograph shooting mode.
Organizer
Organizer contains three other functions: Clock alarm, Schedule, Calculator, Notes, To-Do and Currency exchange.
Clock alarm enables you to set up to three alarms without repeat or with everyday, or weekly repeat. Active Clock alarm is
displayed on the standby screen.
When the Clock alarm rings, press [RS] to switch it off or [LS] to snooze some minutes more. The Clock alarm rings
although the phone is switched off. In Schedule, you can save information about meetings, reminders and another important events. It is possible to set
reminders for these events. Enter a new event
1. Find the required date via Organizer > Schedule > [LS] > New
2. Fill in date, time, alert time, note and select the alarm type. You can also select Repeat of the event. Do not forget to
activate the alarm with Alarm > ON.
Calculator
This calculator is designed for basic calculations and can add, substract, multiply and divide.
- 21 -
Press [*] for decimal point, with [#] key switch between +/-, to display results, press [OK] and to write brackets ( a ), use [W-
CDMA key] and [GSM key].
Notes
You can write in your phone simple text files as notes. Write a note and press [OK] to save it.
To-Do
You can set tasks which you have to do. You can assign to every task a beginning and an end time, set the priority or the
alarm to Remind.
World clock
To view the time in particular cities around the world.
Currency exchange
The phone contains a simple currency converter for converting values from one currency into another.
Time and date – to set the date,the time and the format
Language – to set the language of the phone
Default input method – to set the default text input method
Shortcut key – to assign different functions to cursor [LS] and [RS] keys
- 22 -
Automatic keylock – to set a time to activate the automatic keylock
Slide settings – to set actions which will be done while sliding up and down the keypad of the phone
Memory status – to view the memory capacity of the phone
Settings
You can customise the phone exactly according to your wishes. Go to the main menu, than Settings and press [OK].
Phone
Phone profiles
Each SIM card can have different profiles. Default profile is „Normal mode“. To activate the pre-defined profile, press [OK],
select SIM-1 or SIM-2, than select required profile and press again [OK] to activate. Profiles can be independently
customised for both cards according to your needs. Primary SIM
Here, you can set which SIM card will be used as the primary card. Select the required card and press [OK]. The primary
SIM card will be used for WAP, internet connection and fast dial. Display
To set the background of the standby screen, welcome note, themes and menu styles. A text or logo can be selected as a
welcome note which displays when you switch the phone on. The welcome note can also be switched off. Power saving
To adjust the intensity of backlight brightness of the display and time when the backlight stays active.
- 23 -
Calls
Here you can change the settings of incoming and outgoing calls for each SIM separately. Video calls are available only on
answer or when you are out of reach of the network.
Voice call divert – to set the number that the call shall be diverted to, only when the line is busy, when you do not
SIM-1.
answer or when you are out of reach of the network.
of origin.
Video call divert – to set the number that the video call shall be diverted to, only when the line is busy, when you do not
Call waiting – network service which announces you that you have an incoming call while calling someone else.
Voice call blocking – to set the blocking of outgoing, international or all international calls except calls from the country
Video call blocking – to set the blocking of outgoing, international or all international calls except calls from the country
of origin.
will be dialed.
seconds.
Caller ID – network service which enables you to show or hide your phone number for the called person.
Any key answer – to answer a call with any key on the phone.
Fast dial – to assign from keys 2 to 9, 8 phone numbers, by pressing and holding the key, the assigned phone number
Auto redial – if activated and the called number is busy, the number will be redialed (max. 10 attempts).
Headset auto answer – if the wired headset is connected, the called person will be automatically accepted within 5
Prefix setting – you can create a list of prefixes for international calls which you can use for dialling a phone number.
Alert tone /Connection – when the called person answers your call, the alert tone beeps.
Alert tone / Minute alert – while activated, you will be alerted by a beeping sound every minute.
Security
To protect the phone and both SIM cards against misuse
enter the security code again
PIN activate – to set if the SIM card shall require the entry of a PIN code during activation.
Change PINs – to change the PIN code.
Power on lock – to lock the phone with a 5 digit code.
Phone lock – after entering the security code, the phone will be protected and you will not be able to use it, until you
Change security code – to change the security code (default code is 1234).
Fixed numbers – to set phone numbers allowing outgoing calls.
Privacy guard – to set a password to access personal data (Phone Book, Log, SMS, My Files).
- 24 -
moment, select Automatic.
SIM selection – to set which SIM card shall join the network after switching the phone on. For joining both at the same
Search type – to set the device to automatically or manually select available networks in a roaming area
New search – to select SIM-1 or SIM-2 to search for available networks and manual selection for the network which you
Network
area
want to join
SIM-1 network mode – select Automatic for automatic selection, or set manual selection of the network
Preferred network – list of networks which the SIM cards will join in a given order during manual selection in a roaming
Videophone
Name – any name that defines the profile
Settings for video calls (available only in some networks).
Data profiles
Settings for Internet and WAP connection via GPRS.
APN – address of access point *
IP – IP address of gateway *
Primary DNS – address of Primary DNS server *
Secondary DNS – address of Secondary DNS server *
Security – to set the security of the network (None, PAP, CHAP) *
*) You get this information from your network operator Reset settings
Restore the factory settings. You loose all data in your phone (contacts, SMS, notes, files, etc.). The data on the memory
card remains.
Clear all
This option deletes all data and cancels phone settings.
Bluetooth status – select „On“ to activate Bluetooth. If Bluetooth is switched off, it is not possible to connect to any
device
Paired devices – list of devices which the phone has been paired with. Pairing is important for a secure connection.
provides)
Active device info – information about connected device (name, address, type and name of the service which the device
My phone's visibility – to set, if your device shall be visible for others
Own device info – information about Bluetooth module of your phone
- 25 -
Connectivity
Bluetooth
Bluetooth technology allows electronic devices (mobile phones, PDA and accessories) to make a wireless connection using
radio signals and exchange data. In this way, you can connect the phone to any Bluetooth device within 10 meters. When
required data is exchanged and the connection is interrupted. In contrast to the infrared interface, Bluetooth devices do not
need to be in adirect line of-sight. Bluetooth technology increases the total power consumption of battery and decreases its
runtime. Select in the main menu Connectivity, then Bluetooth and press [OK]. The list of Bluetooth settings displays. Find below its
description.
To pair with another device, select the menu „Paired Devices“ and than „Search for Device“. Select the found device which
you want to pair with and press [OK]. You will be prompted to enter the password. Enter max. 16-digit numbers and enter the
same password to the paired phone. The device will be added to the list of paired devices. When the connection is established you can start or send data as images, videos, music, documents, contacts, etc. To send
the data via Bluetooth, select the item which you want to send, press [LS], select „Send“ and than „Send via Bluetooth“. The
phone displays a list of available devices. Select the device which you want to send the data to. If it is not paired with the
phone, you will be prompted to enter the pairing password. When the devices are paired, the data will be send and a
message shows on the display. If the phone receives a request to receive the data via Bluetooth, it asks you to receive the data. If yes, the data will be saved
and you can find them in My Files.
- 26 -
PC synchronization
You can connect the phone to a computer and use tools on the installation CD to synchronize calender, contacts and e-mails
with your computer, to install new applications into the phone, copy files from the device and into the device and back up files
and information from the phone into the computer. Before connecting the phone to the computer, install the supplied
software. While installing, follow the installer instructions. After installing the software, you can connect the phone to the
computer. In the phone, select in the menu „Connectivity“ and the item „PC synchronization“. Appearing is „Waiting for
connection with PC...“. Now you can start the synchronization software in the computer. USB data cable
You can use the USB data cable to physically connect the phone and the computer. In the normal mode, you can
synchronize data, transfer data to and from the phone with the supplied software or use the phone as a hardware modem for
your computer. In USB disk mode, you can use the memory card in the phone as a usual Flash disk.
Internet
Before connecting to the Internet, set the following:
Contact your network operator to know the specification for WAP service provided by him. Check the availability of the
service, its price and instructions given by the operator.
Notice: Use only services in which you trust in. To activate WAP on the standby screen, press [OK], in the menu find Internet and press [OK] to confirm the access to WAP.
You can change in Settings layout properties, security settings, view certificates, delete temporary certificates and edit
internet profiles.
SIM Toolkit
Your network operator could place on the SIM card other „mini applications“ as a supplement to applications in the phone. To
access them, use this menu. Before using them, verify if they are not charged.
- 27 -
6. Accessories
Charger and Li-Ion battery
The charging time depnds on the battery capacity. Use only original chargers and batteries. Use of non-original batteries
and chargers or other non-original accessories can cause defects which will be not admitted in the warranty period.
USB data cable
Enables to synchronize data and communication between the phone and a computer.
Headset
Has send/end key. You can use the key to answer or finish the call.
CD
On the CD, you find the software for phone backup, drivers, manuals and other information.
Set the backlight brightness to lower intensity.
Dirty contacts on the SIM card or in the phone. Gently clean bonding pads.
Problem Possible causes Solution
network operator.
Settings > Security for deactivation of the lock.
Settings > Security for deactivation of the lock.
long time.
network operator.
1. Press [W-CDMA key] or [GSM key]
1. You did not press [W-CDMA key] or [GSM
key]
signal.
blocking
in Settings > Security > Fixed numbers
blocking
signal.
- 28 -
2. No signal 2. Go near to windows, find a place covered by
3. Outgoing calls are blocked 3. To change, go to Settings > Calls > Voice call
4. The list of allowed numbers was set 4. Allow the called number
1. Phone is switched off 1. Switch the phone on Impossible to answer the call
2. Blocking of incoming calls was set. 2. For change go to Settings > Calls > Voice call
7. Troubleshooting
„Insert SIM“ or „Invalid SIM“ appears on
the display
Low battery runtime Backlight brightness set to high intensity and
No sound in the headset Volume is probably set at LOW. Turn the volume up with appropriate keys.
Phone vibrates but does not ring Profile meeting is probably set. Change the profile to Normal.
Impossible to connect to WAP Wrong setting of WAP Reset settings for connection or contact the
Phone is locked Phone Lock is activated. Enter the right code of the phone and go to
Enter PIN code PIN check is switched on. Enter the right PIN code of the phone and go to
Enter PUK code You entered three times a wrong PIN code. Enter the right PUK code which you got from the
After dialling the number, the call does not
execute.
Called person can not hear your voice 1. Low signal 1. Go near windows, find a place covered by
2. You are to far from the microphone 2. Put your mouth near the microphone.
Impossible to switch the phone on Battery is empty. Charge the battery or exchange it for another one.
GSM: 900/1800/1900
- 29 -
Standby time: 5-10 days (according to used mode)
W-CDMA: 2100 MHz
Talk time: 80-380 minutes ( according to used mode )
101.5×49.4×19.9 mm
120 g (with battery and stylus)
8. Technical specifications
Bands
Number of SIM cards 2 from different or same operator, independently of each other
Memory Up to 1000 contacts in the phone + contacts from SIM1 and SIM2
Battery Li-Ion 3.7V 1010 mAh
LCD / Camera TFT 2.2“ 260 000 colours / Flexaret 2 Mpix/ 0.3 Mpix
Bluetooth Ye s
GPRS / EDGE Class 12
USB port miniUSB 2.0
microSD slot Yes, for up to 4GB memory card
Size
Weight
Dwell time
Do not expose the phone to humidity and dust. Do not expose the phone to liquids.
Do not let the phone fall, do not throw it and do not expose it to knocks.
Keep away from credit cards, computer disks and other magnetic devices.
- 30 -
conductive tape.
Do not expose to temperatures exceeding 50 °C.
Do not remove the battery if the phone is switched on.
Do not lay metal objects on battey contacts, do not pierce it, do not disassemble it into parts.
If a hole appears in the battery, protect your eyes and skin and avoid contact with chemicals.
Stop using the battery if an abnormality such as bad smell, colour spots and overheating occurs.
Do not throw the battery to the dust bin, Dispose of it to a collection point. Prior to disposal strap its contacts with non-
Do not disassemble the phone nor it‘s accessories.
Do not put the phone into a microwave, tumble dryer or high-pressure containers.
While vibrating the phone can move. Do not let it fall.
Disconnect the phone from the computer, switch it off and remove the battery before maintenance.
Do not forget to create a data backup of the phone.
While playing music, do not attach the phone to the ear; your hearing could be damaged.
9. Care and maintenance
The phone contains electronic circuits, magnets and battery systems. Handle with care and avoid following:
Loading...