
BOX 4394
PO
NTA ROSA, CA
SA
402 USA
95
0230-0316rB
P (707) 525-9941
F (707) 575-7046
GPICKUPS.COM
EM
INSTALLATION INFORMATION
EMG MODEL: B289 VERTICAL OR HORIZONTAL (IMPORT)
B289
General INFORMATION:
The B289 is a 3 position selection switches that incorporate EMG’s Solderless Connectors. The B289 Switch is used in both vertical and
horizontal applications. The B289 is a low-profile import model with a metric bushing. The switche uses EMG’s “BNOG” connector arrangement
and include a cable for easy connection to EMG’s connection buss. The B289 includes both 17 inch and 6 inch cable lengths. Simply plug on the
connectors and you’re ready to go. There are some instances where your switch might work backwards, so see page two on how to reverse
the selection if necessary. Ivory and Black switch toggles are available.
.350
(8.89)
B289 VERT/HOR
1.00
(25.4)
1.250
(31.75)
INSTALLATION:
B289 Selection Switches
The “BNOG” scheme is as follows:
B= Bridge Pickup input (White wire)
N= Neck Pickup input (Red wire)
0= Output of Switch (Black wire)
G= Ground (Bare shield)
Install the 4 pin Connector housing on the switch as shown
in the diagram to the right. Install the 2 separate 2 pin connectors
on to the 4 pin connector between the black and red housings as shown.
The black and green terminal blocks will not be used for the switch.
If the switch works backwards?
Simply reverse the connector that has the RED and WHITE wires
and re-insert the plug as shown below.
.555
(14.0)
.462 (M12)
1.5 THD
SWITCH CABLE 17” (43cm)
SWITCH CABLE 6.0” (15cm)
Reverse this connector to make
the switch work in the opposite
direction
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2018 Copyright EMG INC. All Rights Reserved.