Page 1
.460 (11.6)
(15/32 THD)
.878
(22.3)
BOX 4394
PO
NTA ROSA, CA
SA
402 USA
95
0230-0329rA
P (707) 525-9941
F (707) 575-7046
GPICKUPS.COM
EM
INSTALLATION INFORMATION
EMG MODEL: B351 KILL SWITCH
Installation notes:
The B351 Kill switch does exactly what it says, it “kills” the output signal of the guitar.
The switch is a “Momentary” spring loaded switch that kills the signal in the down position
The diagram below shows how this is possible.
Connecting the the Kill Switch;
Refer to the Diagram
The Kill switch is usually the last thing in the signal chain.
The diagram shows a typical installation with the signal coming from the master tone control.
It could just as easily coming from a master volume, or perhaps the Buss board.
The input and output connectors can be swapped.
Be sure the wire colors are installed as shown (Black/White)
1.265
(32.1)
BATTERY NEGATIVE (ACTIVE PICKUPS)
.500
(12.7)
.700
(17.8)
OUTPUT FROM...
SELECTION SWITCH OR BUSS
FOR 2 OR 3 PICKUP GUITARS
MASTER
VOLUME
B122rH
VOLUME
MASTER
TONE
B124rH
TONE
INPUT
OUTPUT CABLE
OUTPUT
R
S
T
BOTTOM VIEW
© 2017 Copyright EMG INC. All Rights Reserved.
Loading...