Emerson Site Supervisor 10.1 Quick Start Manual

Site Supervisor 10.1 Inch Display
Quick Start Guide
The Site Supervisor 10.1 Inch Display (P/N 818-7240) is a remote user interface for the Site Supervisor that connects to the controller using the Ethernet network through the Ethernet port. The Site Supervisor UI allows users to perform critical actions in the controller quickly. Functions such as lighting overrides, controlling heating and cooling stages, status information, and viewing alarms can all be performed using the 10.1 Inch Display.
General Warnings and Safety Precautions
•The Display should not be used for purposes different from those described in this guide. It cannot be used as a safety device.
• When using an external power supply, it is necessary to separate the power of the device from the rest of the electrical devices connected inside the electrical panel.
• Disconnect all electrical connections before any kind of maintenance is performed.
• Do NOT open the Site Supervisor Display. Do NOT open the panel rear cover when power is applied.
• Check that the supply voltage is correct before connecting.
• Do not expose to water or moisture: use the controller only within its operating limits to avoid sudden temperature changes with high atmospheric humidity to prevent condensation.
• Wire polarity must be observed: a wrong connection may cause possible malfunctioning and damage to the controller or Display.
10.1 Inch Display
Display Connections
Display Connections
Document Part # 026-4045 Rev 0 Page 1 of 3
©2018 Emerson Retail Solutions, Inc. This document may be photocopied for personal use. Visit our website at http://www.emerson.com for the latest technical documentation and updates.
Specifications
10.1 Inch Display for Site Supervisor
Screen Size 10.1 Inch
Screen Type Capacitive Multi-Touch
Resolution 1280 x 800
Material ABS Black
Mounting Type Vesa 75mm x 75mm
CPU 1.8 GHZ quadcore
Memory RAM 2GB, HDD 16GB
Network 1 RJ54 Ethernet Port
WIFI Optional
Bluetooth Optional
Unit Size 24.7 x 16.4 x 2.5cm
Rating Commercial
Temp Rating
Power Supply 12VDC 2A max
°F to 140°F (-20°C to 60°C)
-4
Table 1 - Product Specifications
Mounting Dimensions
Document Part # 026-4045 Rev 0 Page 2 of 3
©2018 Emerson Retail Solutions, Inc. This document may be photocopied for personal use. Visit our website at http://www.emerson.com for the latest technical documentation and updates.
Vesa Mount 75mm x 75mm
Loading...
+ 1 hidden pages