Emerson EMP516-2 User Manual

User Guide

EMP516-2

IN THE BOX

MP3 Music & Video Player

Stereo headphones

USB 2.0 Cable

(for battery charging

and high speed data transfer)

Portable speaker

Installation CD

Quick Start and Media Transfer

2 GB

EMP516-2

Quick Start Guide

FCC INFORMATION

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

Southern Telecom, Inc. 14-C 53rd Street Brooklyn, NY 11232 Tel.: 718-567-7778

MP3 Music & Video Player

EMP516-2

INTRODUCTION

Congratulations on purchasing the Emerson MP3 Music & Video Player. This manual contains important safety information and correct operation instructions. Before using the player, read this manual thoroughly and keep it for future reference.

Trademarks and trade names used in this instruction manual are owned by their respective companies or organizations.

Unauthorized duplication of any recordings whether downloaded from the internet or made from audio CDs is a violation of copyright laws and international treaties.

The making of unauthorized copies of copy-protected material, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.

IMPORTANT SAFETY PRECAUTIONS

Always follow these basic safety precautions when using your player. This will reduce the risk of product damage and personal injury.

Do not disassemble, repair or modify the player by yourself. Refer servicing to qualified personnel. The use of a Non-Recommended accessory may cause fire, electric shock, or injury. For approved accessories please contact customer support.

This device contains a built- in battery, do not dispose of in fire. In the event that the battery is leaking, do not handle the device with your bare hands. Contact the service center for help since the liquid may remain in the player. If your body or clothes had contact with the battery liquid, wash it off thoroughly with water. Also, if some liquid gets into your eyes, do not rub your eyes but immediately wash them with clean water, and consult a doctor. Keep the player away from direct sunlight and any direct heat source. Do not expose the unit to rain or moisture. Do not use the player in dry environments to avoid static. Never apply heavy impact on the player, or place it on a magnet. Route the USB cable so that people and pets are not likely to trip over it. Disconnect the USB cable from the computer when you do not use the player for a long time. Clean only with a dry cloth. Make sure the player is turned off before cleaning. Do not use a liquid cleanser. Be sure to back up your files to avoid data loss.

Precautions in using the headphones

Do not use the headphones while driving an automobile or riding a bicycle. It is dangerous, and against the law. To avoid an accident, do not turn up the volume of the headphones too high while walking. It is not recommended that you use the headphones at a high volume for an extended time, as this may cause hearing damage.

FEATURES

 Vivid color display



2 GB internal memory Two headphone jacks (to share your music)



 USB 2.0 high speed connection  Stores and plays music, video, and pictures  Text reading (txt format)

 Digital voice recording (built-in microphone)  Folder navigation  Rechargeable battery  Supports MP3 / WMA music formats  Includes video converter software  JPEG format picture browsing  Includes external speaker

LOCATIONS OF CONTROLS

Neck strap hole

2. Headphone jacks (two)

3. [POWER] switch

4. [PREVIOUS] - Previous track / Fast backwards

[MENU] - Back to the previous menu

6. USB 2.0 Hi-Speed connector for battery charging and data transfer

[NEXT] - Next track / Fast forward

8. [PLAY] - Select / Start or stop play / On-Off button [DOWN] - Volume - / Menu / Option

10. [UP]- Volume + / Menu / Option / A-B Loop

2 2

CONNECTING TO A COMPUTER

System requirements

You computer system must meet the following specifications:

Pentium 200MHz or above Microsoft Windows 2000/ME/XP/Vista USB port supported

USB High Speed Connection Cable MP3 Player

PC connection

In order to enjoy the multimedia capabilities of your MP3 Player, you have to first copy your favorite files from your PC to it’s internal memory. Connect your MP3 Player to the computer using the included USB 2.0 cable. The device will be detected automatically without installing any driver.

Once detected, you can read/write to the device’s memory just as if you where using a regular disk drive. Make sure your computer is powered on, and follow the steps below to connect the player to your computer.

1. Plug the larger USB connector of the USB cable into the USB port on the computer.

2. Plug the other end (small) of the USB cable to the player.

3. The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation. When it has finished, “Emerson MP3” will be created in “My Computer”.

Important: To avoid any data loss, always perform a safe USB device extraction before disconnecting the USB cable from the PC.

In Windows XP, for example, you can find the safe extraction icon in the task bar next to the system clock.

Disconnecting the USB cable

After completing the file transfer, please disconnect the USB cable the following way:

1. Double click the green arrow “Safely Remove Hardware” in the task bar on the bottom right of the window.

2. Select “USB Device” and click “Stop”.

3. When the “Stop a Hardware device” appears, click “OK” to disconnect the USB mass storage device, and unplug the player safely.

+ 21 hidden pages