Edco FAS-TEL-DOT
RJ Connection Telephone Protection for Traffic Cabinets
Surge Protection
For Business-Critical Continuity
TM
The Edco FAS-TEL-DOT is a single pair telephone protector that implements an
advanced three-stage hybrid design. This unit addresses over-voltage transients with
gas discharge tubes (GDT) and silicon breakover devices. Additionally, sneak and fault
currents are mitigated with PTC technology, which consists of solid state resettable
fuses. The Edco FAS-TEL-DOT is specifically designed for more rugged applications
such as traffic cabinets.
Features
Three-stage hybrid design
Rugged gas tube protection
Sneak/fault current protection
Fast response time
5 year warranty
Caution
1. Installation and service should be performed by qualified electricians only.
2. Before installing FAS-TEL-DOT, remove all electrical power from circuits.
3. Do not place this product in service on any signal line capable of supplying more than 5 Amps
continuously.
Part Number Edco FAS-TEL-DOT
Operating Voltage 220 VDC
Clamping Voltage 270 VDC
Operating Current 0.15A
Peak Surge Current 10kA
Frequency Range 0 to 20 MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology GDT, Silicon Breakover w/PTC
Connection Type Term block, comp.lug IN / RJ OUT
Operating Temperature -40°C to +85°C
Dimensions (Inches) 1H x 2W x 2L
Weight 2 oz
General Technical Specifications
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Infrastructure Management &
Monitoring
Outside Plant
Power Switching & Control
Racks and Integrated Cabinets
Services
Precision Cooling
Surge Protection
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity
TM
.
IO-50131 2/12 Rev. 2 Printed in USA
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power
logo are trademarks and service marks of Emerson Electric Co. ©2012 Emerson Electric Co.
www.emersonnetworkpower.com/surge
Emerson Network Power Contact information
Headquarters
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: contactsurge@emerson.com
Installation