Emerson DCM Modular Technical Specifications
DCM™ Modular Rack System
Advanced Features and Customizable Options For Unique Data Center Needs
Integrated Cabinet Solutions
For Business-Critical Continuity
™
It All Starts With The DCM™ Rack
A Global Cabinet For Your Universe
The DCM modular rack platform from Emerson
Network Power allows facility managers and
IT professionals manage server, switch, and
termination applications.
DCM Modular Rack was designed as the base element for
all of Emerson Network Power’s row and rack solutions and
is compatible with all rack- and row-based Liebert
and Liebert Precision Cooling products.
The DCM rack offers all the advanced features and innovative
exibility required to accommodate today’s dense and
complex IT systems and network gear.
The DCM rack simplies equipment installation, improves
cable management, and increases visibility and control of
equipment inside the rack. The rack easily integrates power,
cooling, and monitoring systems to provide a complete
support system.
®
Power
Standardization For The
Entire Data Center: It Starts With
The DCM Modular Rack
The DCM rack is the basic building block for all of
the Emerson Network Power row- and rack-based
solutions. It is also compatible with every rack- and
row-based Liebert power, cooling, monitoring and
cable management product.
Liebert XDR™ rear door cooling module, part of
the Liebert XD system, attaches easily to the
DCM rack — an extremely efcient high density
cooling solution.
Liebert MB Modular Bus Power distribution mounts
directly to the top cover of the DCM rack. This
mounting style not only brings high capacity
power distribution directly to the rack and row
level, but also saves signicant amounts of labor
time and cost.
Emerson Network Power offers several methods of
Aisle Containment, with styles that either mount
directly to the cabinet or to the ceiling in the
data center. Containment is an effective means
to increase capacity and efciency of the room
cooling system.
Emerson Network Power family of rack PDUs
effectively distribute power to the rack level. These
PDUs are designed to easily mount in the
DCM rack platform.
The cabinet of the Liebert CRV™ row-based
precision cooling system is based on the DCM rack
frame — a perfect physical match that provides
efcient, effective rack cooling.
2
Features
83+% Open Area
For Improved Airow,
Highest In The Industry
Tool-Less Shelf
Mounts In Square
Holes On 19” Rails In
Seconds
Spring Nut In T-Slot
Allows Component
Mounting Anywhere In
Cabinet Frame
Doors Open to 135˚
Lift-Off Tool-Less Internal
Hinges Allow For Easy Door
Removal And Greater Security
Lightweight
Aluminium Frame
Makes The Cabinet Easier
For A Single Person To Move
Tool-Less Cable
Management on Frame
Insert And 1/4 Turn, Installs
In A Second
Low Profile Casters
Allows 42U Cabinet To
Roll Through Standard
Doorway
3
DCM™ Network Rack for Cisco 7000 Series Switches
Components
Model Number Part Description
D42CIS7010
D45CIS7010
D42CIS7010SP
D45CIS7010SP
D42CIS7010P2
D45CIS7010P2
D42CIS7018
42U DCM Rack 800W X 1200D w/sides
Supports up to 7010 Cisco chassis
45U DCM Rack 800W X 1200D w/sides
Supports up to two 7010 Cisco chassis
42U DCM Rack 800W X 1200D w/1 side
& 1 partition panel
Supports up to 7010 Cisco chassis
45U DCM Rack 800W X 1200D w/1 sides
& 1 partition panel
Supports up to two 7010 Cisco chassis
42U DCM Rack 800W X 1200D w/2
partition panels
Supports up to 7010 Cisco chassis
45U DCM Rack 800W X 1200D w/2
partition panels
Supports up to two 7010 Cisco chassis
42U DCM Rack 1000W X 1200D w/sides
Supports one 7018 Cisco chassis
Vertical
Filler Panel
Installed in
Front of rack
Installed in
Front of rack
Installed in
Front of rack
Installed in
Front of rack
Installed in
Front of rack
Installed in
Front of rack
Installed in
front left and
right rear
Baffle Cabling Fingers
N/A
N/A
N/A
N/A
N/A
N/A
Viewing from front
Installed in upper
left of rack
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
D45CIS7018
D52CIS7018
4
45U DCM Rack 1000W X 1200D w/sides
Supports one 7018 Cisco chassis
52U DCM Rack 1000W X 1200D w/sides
Supports one 7018 Cisco chassis
Installed in front
left and rear
right
Installed in front
left and rear
right
Viewing from front
Installed in upper
left of rack
Viewing from front
Installed in upper
left of rack
36U installed on front right
and left vertical rail
36U installed on front right
and left vertical rail
Components
Model Number Part Description
D52CIS70182
D42CIS7018SP
D45CIS7018SP
D52CIS7018SP
D52CIS70182SP
D42CIS7018P2
D45CIS7018P2
52U DCM™ Rack 1000W X 1200D w/sides
Supports two 7018 Cisco chassis
42U DCM Rack 1000W X 1200D
w/1 side & 1 partition panel
Supports one 7018 Cisco chassis
45U DCM Rack 1000W X 1200D w/1 side
& 1 partition panel
Supports one 7018 Cisco chassis
52U DCM Rack 1000W X 1200D w/1 side
& 1 partition panel
Supports one 7018 Cisco chassis
52U DCM Rack 1000W X 1200D w/1 side
& 1 partition panel
Supports two 7018 Cisco chassis
42U DCM Rack 1000W X 1200D w/2
partition panels
Supports one 7018 Cisco chassis
45U DCM Rack 1000W X 1200D w/2
partition panels
Supports one 7018 Cisco chassis
Vertical
Filler Panel
Installed in front
left and rear right
Installed in front
left and rear right
Installed in front
left and rear right
Installed in front
left and rear right
Installed in front
left and rear right
Installed in front
left and rear right
Installed in front
left and rear right
Baffle Cabling Fingers
N/A*
Viewing from front
Installed in upper
left of rack
Viewing from front
Installed in upper
left of rack
Viewing from front
Installed in upper
left of rack
N/A*
Viewing from front
Installed in upper
left of rack
Viewing from front
Installed in upper
left of rack
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
52U DCM Rack 1000W X 1200D w/2
D52CIS7018P2
Supports one 7018 Cisco chassis
52U DCM Rack 1000W X 1200D w/2
D52CIS70182P2
Supports two 7018 Cisco chassis
*This rack the bafe is intentially left out so it can support two 7018 chassis’s
partition panels
partition panels
Installed in front
left and rear right
Installed in front
left and rear right
Viewing from front
Installed in upper
left of rack
N/A*
36U installed on front
right and left vertical rail
36U installed on front
right and left vertical rail
5
Cabinet Part Numbering Description
Use The Matrix To Create Your Part Number.
Choose, in order, the: height, width, depth, front door type, rear
door type, and side panel number and type.
Sample Part Number:
This part number indicates a DCM cabinet with 78” height
frame, 23.6” width with sides, 43.3” depth with doors, single
perforated front door, split perforated doors, two side panels,
black paint and two sets of 19” rails.
D K 6 B 1 2 2 0 0
Product Height Width Depth Front Doors Rear Doors Side Panel Reserved Reserved
Product Height Width Depth
D=DCM K=2000mm
(42U)
L=2100mm
(45U)
6=600mm
(23.6”)
7=700mm
(27.6”)
8=800mm
(31.5”)
A=1000mm
(39.4”)
B=1100mm
(43.3”)
C=1200mm
(47.3”)
Front
Doors
0=No door 0=No door 0=None
1=Single
perforated
door
2=Split
perforated
doors
Rear Doors Side Panel Reserved Reserved
1=Single
perforated
door
2=Split
perforated
doors
1=1 Side
panel
2=2 Side
panels
3=1 Partition 3=3 Factory
5=1 Side
panel and
1 partition
panel
~ ~
1 Factory
installed
accessories
Factory
Installed
Accesories
0=No
Factory
Installed
Accesories
1=Yes
Factory
Installed
Accesories
2 Factory
Installed
PDU’s
Factory
Installed PDUs
0=No Factory
Installed PDUs
1=1 Factory
Installed PDU
2=2 Factory
Installed PDUs
Installed PDUs
4=4 Factory
Installed PDUs
Multiple Sizes to Fit
Your Needs
The table to the right shows
the measurements for the
different height, width and
depth options available in the
DCM rack.
6
Part Part Number Description
H Height
W Width
D Depth
K 77.5 1968 78.1 1986 78.6 1999
L 82.8 2103 83.4 2121 83.9 2134
6 23.3 591 23.6 600
7 27.2 691 27.6 700
8 31.1 791 31.5 800
A 38.8 986 39.4 1000
B 42.8 1086 43.3 1100
C 46.7 1186 47.2 1200
Frame Leveling Feet Casters
IN MM IN MM IN MM
No Sides With Sides
IN MM IN MM
No Doors With Doors
IN MM IN MM
Loading...