Emerson Daniel MeterLink User Manual
Daniel ™ MeterLink™ Software v1.10
for Daniel Gas and Liquid Ultrasonic Flow Meters
Quick Start Manual
P/N 3-9000-763, Rev C
March 2013
Software License Agreement
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE INSTALLING AND USING THE
SOFTWARE. IF YOU DO NOT AGREE WITH THE TERMS OF THE AGREEMENT, YOU ARE NOT PERMITTED TO USE THE SOFTWARE
AND MUST RETURN THE SOFTWARE AND INSTALLATION GUIDE TO THE PLACE WHERE YOU OBTAINED IT, IF APPLICABLE.
Daniel Measurement and Control, Inc. (“DANIEL”) provides this software (“Program”) and installation guide (collectively, “Daniel
MeterLink(TM) product”) for your use. You assume responsibility for the acquisition of a machine(s) and associated equipment
compatible with the Program, and for installation, use, and results obtained from the Program. DANIEL grants to you a nontransferable, non-exclusive license to: (a) install and use the Program provided to you to run on any number of your machines and
(b) copy the Program for backup purposes. You must reproduce and include the copyright notice or any other proprietary notice on
any copy of the Program. YOU MAY NOT REVERSE ENGINEER, USE, COPY OR MODIFY ANY PROGRAM OR RELATED MATERIALS
OR ANY COPY OR MODIFICATION, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE. IF YOU
TRANSFER POSSESSION OF THE DANIEL METERLINK(TM) PRODUCT OR ANY COPY OF THE DANIEL METERLINK(TM) PRODUCT
TO ANOTHER PARTY, WITHOUT DANIEL'S PRIOR WRITTEN CONSENT, YOUR LICENSE IS AUTOMATICALLY TERMINATED. No
license, express or implied, is granted under any intellectual property directly or indirectly owned by DANIEL which does not
specifically read on the Daniel MeterLink(TM) product as provided hereunder, nor shall any license, except the license specifically
granted herein, be implied in law, implied in equity, or exist under the doctrine of patent exhaustion. The Daniel MeterLink(TM)
product accompanying this Agreement whether on disk, downloaded or on any other media or in any other form are licensed, not
sold, to you by DANIEL for use only under the terms of this Agreement, and DANIEL reserves all rights not expressly granted to you.
The terms of this Agreement will govern any software upgrades provided by DANIEL that replace and/or supplement the original
Daniel MeterLink(TM) product, unless such upgrade is accompanied by a separate license in which case the terms of that license will
govern.
1. TITLE AND COPYRIGHT: Title to and ownership of the Daniel MeterLink(TM) product shall at all times remain with DANIEL or its
licensors and is protected by United States copyright laws and international treaty provisions. Your right to use the same is at all
times subject to the terms and condition of this Agreement. DANIEL may, from time to time, revise or update the program and/or
installation guide and, in so doing, incurs no obligation to furnish such revisions or updates to you.
2. TERM: You may terminate this license at any time by destroying the media on which the Program was furnished and the
installation guide together with all copies in any form. In addition, the Program installed on the machine(s) must be uninstalled or
rendered unusable. This license will also terminate upon conditions set forth elsewhere in this Agreement or if you fail to comply
with any term or condition of this Agreement. You agree upon such termination to destroy the media on which the Program was
furnished and the installation guide together with all copies in any form and to uninstall or render unusable the Program installed
on the machine(s).
3. LIMITED WARRANTY: DANIEL warrants the media on which the Program is furnished to be free from defects in materials and
workmanship under normal use for a period of ninety (90) days from the date of delivery to you as evidenced by a copy of your
invoice. However, DANIEL does not warrant that the functions contained in the Program will meet your requirements or that the
operation of the Program will be uninterrupted or error free. THE DANIEL METERLINK(TM) PRODUCT IS PROVIDED“AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. The above Limited Warranty is void if the
failure of the Program has resulted from accident, abuse or misapplication.
4. LIMITATIONS OF REMEDIES: DANIEL's entire liability and your exclusive remedy shall be the replacement of any media not
meeting DANIEL's “Limited Warranty”. IN NO EVENT SHALL DANIEL BE LIABLE TO YOU FOR ANY DAMAGES ARISING OUT OF
ANY CAUSE WHAT SO EVER (WHETHER SUCH CAUSES ARE BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER
TORT, PATENT INFRINGEMENT OR OTHERWISE), INCLUDING ANY LOST PROFITS, LOST SAVINGS OR INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PROGRAM EVEN IF DANIEL HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.
5. GOVERNING LAW: This Agreement, and all matters concerning its construction, interpretation, performance or validity, shall be
governed by the laws of the State of Texas, excluding its conflict laws.
6. EXPORT RESTRICTIONS: You shall comply fully with all laws, regulations, decrees and orders of the United States of America that
restrict or prohibit the exportation (or re-exportation) of technical data and/or the direct product of it to other countries,
including, without limitation, the U.S. Export Administration Regulations.
7. U.S. GOVERNMENT RIGHTS: The Daniel MeterLink(TM) product is provided with “RESTRICTED RIGHTS”. Use, duplication or
disclosure by the U.S. Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements.
8. GENERAL: You may not sublicense, assign, or transfer the license or the Program and installation guide without the prior written
consent of DANIEL. Any attempt otherwise to sublicense, assign or transfer any of the rights, duties, or obligations hereunder
without such consent is void. THE PROGRAM IS NOT FOR USE IN ANY NUCLEAR AND RELATED APPLICATIONS. You accept the
program with the foregoing understanding and agree to indemnify and hold harmless DANIEL from any claims, losses, suits,
judgments and damages, including incidental and consequential damages, arising from such use, whether the cause of action be
based in tort, contract or otherwise, including allegations that DANIEL's liability is based on negligence or strict liability. To the
extent that a third party owns and has licensed to DANIEL any portion of the program, such third party owner shall be a
beneficiary of this Agreement, and shall have the right to enforce its rights under this Agreement independently of DANIEL.
Should you have any question concerning this Agreement, please contact your DANIEL representative or sales office. YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND
CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN
US WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS
BETWEEN US RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. YOU AGREE THAT DANIEL MAY AUDIT YOUR
FACILITY TO CONFIRM COMPLIANCE WITH THE FOREGOING PROVISIONS.
Daniel MeterLink™ system requirements
1 Daniel MeterLink™ system
requirements
Installation system requirements
Software requirements
Windows® XP Service Pack 2 or later
Windows Vista
Windows™ 7 (Ultimate, Home Premium and Professional 32- and 64-bit editions)
Windows® 8 ("basic", Pro and Enterprise 32- and 64-bit editions)
Microsoft™ Excel® 2000 or later version (log file(s) are CSV format if Excel 2000 or later is not available)
Microsoft® XML parser v2.6 or above
Internet Explorer 5.01 or later
®
Note
Daniel CUI should not be run simultaneously with Daniel MeterLink
Hardware
PC with a 133MHz Pentium or higher processor (300MHz recommended)
One serial port available for remote/local connection (for on-line operations)
One Ethernet port available for remote/local connection (for on-line operations)
One parallel port for connection to a local printer, or a connection to a network printer (optional)
100MB of free hard disk space
Super VGA monitor (at least 1024x768 resolution)
Windows®-compatible printer (optional), modem (remote connection only) and mouse (i.e.
Mouse, Trackball or Touchpad)
™
Quick Start Manual 1
Install Daniel MeterLink
2 Install Daniel MeterLink
Software installation
Procedure
1. Insert the CD in the appropriate drive.
2. Follow the installation wizard instructions to complete the software installation.
3. Use the tables below for your operating system.
Make sure you have administrative rights before proceeding. If you are not sure, continue
and the installation program will inform you if you don’t and abort the installation. Consult
your system administrator for assistance.
Note
The Daniel MeterLink installation program is also available for download from the Daniel
Measurement and Control, Inc. website: http://www.daniel.com/um2.htm
Windows® XP installation
Install Daniel MeterLink on Windows® XP
Start > Run > Browse. Locate directory for Setup.exe> Click OK.
Browse to locate the directory for Setup.exe> Click OK.
Windows® opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
Windows® Vista installation
Install Daniel MeterLink on Windows®Vista
Start > Computer. Locate CD drive containing the disk.
Double-click Setup.exe to begin the installation.
You will receive a message An unidentified program wants access to your computer, select Allow - I
trust this program. I know where it's from or I've used it before.
Windows® opens the setup file. Follow the instruction on the screen.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
2 Daniel MeterLink
Loading...