Emerson CP-70Z Brochures and Data Sheets

Chloride CP-70Z 31 AC UPS System

5 to 250kVA - 1ph output

Industrial Power for

Business-Critical Continuity™

The Chloride CP-70Z industrial
Uninterruptible Power Supply system

(UPS) is the agship product of
Chloride Industrial Power. It combines
conservative design topology with
proven digital control technology to
offer the best performances in any
electrical and environmental condition.

The Chloride CP range is designed to meet
the stringent electrical and mechanical requi­rements in industrial environments.
Each Chloride CP product is based on
interchangeable sub-assemblies to allow full
customization, in compliance with client’s
technical specication and with project docu­mentation requirements.

Benets

n Tailor made systems to comply with all

customer’s specications.

n Ruggedized solutions for demanding

environments: extended temperatures,
vibrations, dust, elevation, dripping water
and moisture.

n Efcient maintenance thanks to easy front-

access to all vital modules of the system.

Key Features

n Reliability - Unique design which allows

the UPS to continuously operate for at least
20 years at full load at a permanent 40°C
ambient temperature.

n On-line double conversion - UPS classied

VFI SS 111 as per IEC62040-3

n Robust mechanical design - the system

withstands vertical and horizontal
acceleration stress tests up to 0.5g as
standard

n Galvanic isolation –input and output

transformers as standard

n Multilingual digital graphic display with

embedded event log

n Remote monitoring capabilities: Modbus,

Probus, DF1, ethernet, volt-free contact,

monitoring software

n Fully customized electrical and mechanical

solutions – On demand design to comply
with every standards (e.g. UL, ANSI, NEMA,

IEC, CSA, ABS, DNV)

n Full compatibility with lead-acid and nickel-

cadmium batteries sealed or vented

Applications

The Chloride CP-70Z AC UPS System range suits all
applications such as:

n Oil and Gas offshore and onshore
n Rening and petrochemical plants
n Power generation plants
n Transportation (rail, metro, tramway)

The Chloride CP range is designed to meet the harshest electrical and
mechanical requirements in industrial environments.
Each Chloride CP product is based on interchangeable sub-assemblies to allow

full customization, in compliance with client’s technical specication and with
project documentation requirements.

Associated with an industrial stand-by battery, the Chloride CP-70Z 31 range
is dedicated to protect critical industrial single phase AC equipments and
processes from the damaging effects of power interruption and losses

.

Chloride CP-70Z 31 UPS System

5 to 250 kVA - 1ph output

Industrial Power for

Business-Critical Continuity™

Ratings - Output power (kVA) vs DC intermediate voltage (Vdc)

110–120Vdc 220-240Vdc 400Vdc

2.5

5

7.5

10 10
15 15
20 20
25 25

30 30
40 40 40
50 50 50
60 60 60

Up to 250 kVA on request

80 80

100 100
120 120

Options

Rectier 12-pulse rectier

Battery Battery circuit protection box

System Dual congurations

Mechanical Up to IP42 external

Communication Front-panel analog meters (72x72 class 1.5)

Non-exhaustive list of options. Consult us for any other requirements.

Harmonic lter
Ripple lters

Blocking diode

Other input voltage (3x190 to 3x690VAC)
Inrush current limitation to 8In

Surge and Lightning protections

Battery cabinet
Low-voltage disconnect contactor
Battery Management System
Battery room temperature sensor

Hot stand-by conguration
Input / intermediate /output isolators
DC/DC serial regulator
isolated DC/DC converter

AC distribution
Earth fault monitoring
Backfeed protection
Internal lighting
Anti-condensation heater
Temperature monitor

Special cabinet identication

Reserve transformer
Reserve st abilizer

Top cable entry
Other frame colour
Anti-seismic design

Transducers
Additional Volt-free contacts
Remote monitoring via Modbus
Remote monitoring via other bus
PPVis monitoring software
Passive or active mimic panel

Standards

Compliance IEC 62040 (-1, -2, -3) / 60146 (-1-1, -1-3, -2) / IEC 60950

Conformity Low voltage directive: 2006/95/EC

IEC 61000-6-2 - IEC 61000-6-4

IEC 60529 / IEC 60439 / IEC 60076

EMC directive: 2004/108/EC

CE Mark

Technical Data

Input

AC voltage 3 x 400V (380, 415)*

Voltage tolerance +/- 10%
Frequency 50Hz (60Hz)
Frequency tolerance +/- 5%

Intermediate DC Circuit

Nominal DC voltage 110 / 120 / 220 / 240 / 400 V

Voltage stability +/- 1% in oat mode, input within tolerance

Voltage ripple 1% RMS, in oat, battery connected

Current limitation I nominal

Charging characteristic UI according to DIN 41773

Ouput

Available ratings see table above (at PF 0.8 lagging)
AC Voltage 1 x 230V (220, 240) ; 1 x 110V (115, 120)*
Frequency 50Hz (60Hz)

Frequency stability

• with internal oscillator +/- 0.5%

• with reserve synchronism +/-3% (from 0.2 to 6% adjustable)

Frequency response <1Hz/s (0.1Hz/s for parallel systems)
Voltage stability (for 0-100% load variation)

• static +/-1% (+/-2% for parallel systems)

• dynamic +/-2% (+/-3% for parallel systems)

Overload inverter

• 1 minute 150% of nominal power

• 10 minutes 125% of nominal power

Short circuit clearance

• 100 ms 250% of nominal current

• 5 s 175% of nominal current

Distortion

• With 100% linear load 3%

• With 100% non-linear load Complies with IEC 62040-1-2

Allowable power factor 0.5 lagging to 0.5 leading
Allowable crest factor 3

Battery

Typ e Lead Acid or Nickel Cadmium vented or

Autonomy From few minutes to several hours, as per

Battery current limitation

(typical, oat & charge modes)

Battery current limitation

(typical, boost mode)

General Data

Operating temperature 0 to 40°C*

Storage temperature (°C) -20 to +70°C

Relative humidity (%) <90% non condensing

Operating altitude (m) 1000 m max without derating

Cooling Forced ventilation

Efciency Up to 90% according to rating

External protection IP 20* according to IEC 60529

Noise (dB) 60 – 75 dB according to rating

Frame colour Grey RAL 7032

Dimensions Varying according to ratings & options

* other available on request

+/-1.5% for parallel rectiers

recombination

customer’s requirement

0.1C (Lead Acid battery)

0.2C (Nickel Cadmium battery)

0.05C (Lead acid battery)

0.1C (Nickel Cadmium battery)

While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or

omissions.

Emerson Network Power.

The global leader in enabling

Business-Critical Continuity™.

n AC Power
n Connectivity
n DC Power
n Embedded Computing

Emerson Network Power I S S.A.S

30 Avenue Montgol er - BP90 - 69684 Chassie u Cedex France
T: [phone] F: [phone]

[e-mail]
EmersonNetworkPower.com

n Embedded Power

n Industrial Power

n Infrastructure Management & Monitoring
n Outside Plant

Emers on Electric Co. or one of i ts afliate d companies.

CP70Z 31 AC UPS Syst em-DSUK-Rev2-02/2013

n Power Switching & Controls
n Precision Cooling
n Racks & Integrated Cabinets
n Services

Emerson, Business-Critical Continuit y and

Emers on Network Po wer are trademarks of

©2013 Emerson Elec tric Co.