Emerson CP-70i Brochures and Data Sheets

Chloride CP-70i 01 - DC/AC inverter

2.5 to 250kVA - 1ph output

Industrial Power for

Business-Critical Continuity™

The Chloride CP-70i industrial

inverter is the agship inverter of

Chloride Industrial Power. It combines

conservative design topology with
proven digital control technology
to offer the best performances in
any electrical and environmental

condition.

The Chloride CP range is designed to meet
the stringent electrical and mechanical
requirements in industrial environments.
Each Chloride CP product is based on inter­changeable sub-assemblies to allow full
customization, in compliance with client’s

technical specication and with project

documentation requirements.

Benets

n Made to order DC/AC inverter solutions

to exactly t the industrial application

requirements

n Ruggedized solutions for demanding

environments: high temperatures,
vibrations, dust, elevation, dripping water
and moisture

n Efcient maintenance thanks to easy

front-access to all vital modules of the
system

Custom-designed DC/AC inverters to supply critical industrial processes.

The Chloride CP-70i 01 converts a DC input voltage into a perfect sinusoidal single­phase output voltage to provide power to critical AC loads. It uses the patented digital
Vector Control technology which increases the performances of power components
and enables an active conditioning of the load. The result is improved reliability for the
process and enhanced safety for the personnel.

The CP-70i 01 range is available from 2.5kVA to 250kVA. It offers a wide choice of DC
input voltages (from 110Vdc to 240Vdc) and of output voltages.

The CP-70i 01 range is also available with 400Vdc input. This conguration can be
combined with a CP-70R 30 rectier-charger in order to design specic high ratings

double conversion AC UPS systems.

To further improve load availability and process reliability, the CP-70i 01 is able to

operate in dual parallel conguration, with centralized or distributed reserve line, and

can include an AC bus-tie.

Key Features

n Reliability - Unique design which allows

the inverter to continuously operate for at
least 20 years at full load at 40°C

n Robust mechanical design - The inverter

withstands vertical and horizontal
acceleration stress tests up to 0.5g as
standard

n Galvanic isolation - Output transformer is

included as standard

n Multilingual digital graphic display with

embedded event log

n Remote monitoring capabilities: Modbus,

Probus, DF1, ethernet, volt-free contacts,

monitoring software

n Fully customized electrical and mechanical

solutions – On demand design to comply
with every standard (e.g. UL, ANSI, NEMA,
IEC, CSA, ABS, DNV)

Applications

The Chloride CP-70i DC/AC inverter range suits
applications such as:

n Oil and Gas offshore and onshore
n Rening and petrochemical plants
n Conventional power generation plants
n Transmission and Distribution substations
n Transportation (rail, metro, tramway)

Chloride CP-70i 01 DC/AC inverter

2.5 to 250 kVA - 1ph output

Industrial Power for

Business-Critical Continuity™

Ratings - Output power (kVA) vs DC intermediate voltage (Vdc)

110–120Vdc 220-240Vdc

2.5

5

7.5

10 10

15 15

20 20

25 25

30 30

40 40

50 50

60 60

80 80

100 100

120 120

160

200

250

Options

Inverter Dual congurations

Input / output isolators
AC distribution
Earth fault monitoring
Internal lighting
Anti-condensation heater
Temperature monitor

Special cabinet identication

Reserve transformer
Reserve stabilizer

Mechanical Up to IP42 external

Top cable entry
Other frame colour
Anti-seismic design

Communication Front-panel analog meters (72x72 class 1.5)

Transducers
Additional Volt-free contacts
Remote monitoring via Modbus
Remote monitoring via other bus
PPVis monitoring software
Passive or active mimic panel

Non-exhaustive list of options. Consult us for any other requirements.

Technical Data

Input

DC voltage 110 / 120 / 220 / 240 (400V on request)

Voltage tolerance +18% /- 20%

Output

Available ratings see table (at PF 0.8 lagging)

AC Voltage 1 x 230V (220, 240) ; 1 x 110V (115, 120)*

Frequency 50Hz (60Hz)

Frequency stability

• with internal oscillator +/- 0.05%

• with reserve synchronism +/-4% (from 1.2 to 6% adjustable)

Frequency response <1Hz/s (0.1Hz/s for parallel systems)

Voltage stability (for 0-100% load variation)

• static +/-1% (+/-2% for parallel systems)

• dynamic VFI SS 111 - Complies with IEC/EN 62040-3,

Overload inverter

• 1 minute 150% of nominal power

• 10 minutes 125% of nominal power

Short circuit clearance

• 100 ms 250% of nominal current

• 5 s 175% of nominal current

Harmonic voltage distortion

• With 100% linear load < 3%

• With 100% non-linear load ≤ 5% (non linear load dened by IEC 62040)

Allowable power factor 0.5 lagging to 0.5 leading

Allowable crest factor 3/1

General Data

Operating temperature 0 to 40°C*

Storage temperature (°C) -20 to +70°C

Relative humidity (%) <90% non condensing

Operating altitude (m) 1000 m max without derating

Cooling Forced ventilation

Efciency Up to 91% according to rating

External protection IP 20* according to IEC 60529

Noise (dB) 60 – 75 dB according to rating

Frame colour Grey RAL 7032

Dimensions Varying according to ratings & options

* other available on request

Standards

Compliance IEC 62040 (-1, -2, -3) / 60146 (-1-1, -1-3, -2) / IEC 609650

Conformity Low voltage directive: 2006/95/EC

IEC 61000-6-2 - IEC 61000-6-4

IEC 60529 / IEC 60439 / IEC 60076

EMC directive: 2004/108/EC

CE Mark

class 1

Emerson Network Power.

The global leader in enabling

Business-Critical Continuity™.

Emerson Network Power I S S.A.S

30 Avenue Montgol er - BP90 - 69684 Chassieu Cedex France
T: [phone] F: [phone]

[e-mail]
EmersonNetworkPower.com

n AC Power
n Connectivity
n DC Power
n Embedded Computing

n Embedded Power

n Industrial Power

n Infrastructure Management & Monitoring
n Outside Plant

Emers on Electric Co. or one of i ts afliate d companies.

CP70i 01 DC/AC inverter- DSUK-Rev3-06/2013

While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network Power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

n Power Switching & Controls
n Precision Cooling
n Racks & Integrated Cabinets
n Services

Emerson, Business-Critical Continuit y and

Emers on Network Po wer are trademarks of

©2013 Emerson Elec tric Co.