Page 1
Omni Series
Ultrasonic Cleaning
OMNI 2000 Cleaning
Systems – Models 1620
and 1620 RI
The OMNI 2000 cleaning system by
Branson is a fully-configured ultrasonic
cleaning and rinsing system with a
built-in dryer. Also available, as an
option, is a rust inhibitor station in the
second rinse tank. The equipment
incorporates quality workmanship and
materials without including unnecessary extras.
The OMNI 2000 offers a full range of
hard-working features, while occupying
only a fraction of the floor space of
comparable systems. All controls are
mounted in a convenient control box
and operate at 24 volts for safety.
CLEANING
Precision cleaning is accomplished
in the first chamber. This chamber
is equipped with Branson Series 7000
industrial 40 kHz ultrasonic components and thermostatically-controlled
heat. A recirculating pump and filter
system to continuously remove
particulate material is standard.
RINSING
Precision cleaning is accomplished in
the first process tank. This tank is
equipped with Branson industrial 40
or 25 kHz ultrasonic components and
thermostatically-controlled heat. A
recirculating pump and filter system
to continuously remove particulate
material is standard.
RUST INHIBITING OPTION
As an option, the user may choose to
use the second rinse tank as a rust
inhibitor dip prior to drying. This model,
1620-RI, is useful when cleaning steel
components. The valving associated
with this system allows easy conversion
from a single overflow rinse back to
a dual tank cascade rinse in seconds if
your process changes.
DRYING
The drying station utilizes both
elevated temperature and rapid air
movement to produce dry parts. The
chamber is furnished with a 3" vent
duct to facilitate moist air removal.
Page 2
Ultrasonic Cleaning
Omni Series
FEATURES & BENEFITS
• Clean, rinse, and dry in a single unit
• Small footprint minimizes floor
space needs
• Low voltage controls for safety
• Standard filtration to extend cleaning
bath life
• Ultrasonics on rinse tank for superior
performance
• Convenient working height
• Durable stainless steel construction
• Easy access to routine maintenance
components
• Convenient control panel for easy
operation
• Recessed work surface for fluid spill
containment
• Automation interface port for
transport systems (e.g., Branson TDR)
Specifications
Working tank size: 16" x 20" x 16" D
Process tank material: 316L bright annealed
Drain sizes: 3/4" NPT
Cleaning tank temperature: Ambient to 160° F
Recirculation flow rate: 1-3 GPM
Filter retention: 10 microns
Ultrasonic output: 1000 watts/tanks
Dryer heat: 6,000 watts
Dryer airflow: 550 cfm
Dryer temperature: 250° F maximum
Input voltage: 208-240V, AC, 35 amps, 3 phase
• Rust inhibition option for steel parts
OPTIONS
• Wash Tank Surface Sparger
• Oil Removal Package (Coalescer,
Ultrafiltration)
• DI Water Heater
• DI Water Treatment System
• Automated Material Handling (TDR)
• Rotating Baskets
• Series 8500 Advanced Power Supply
• Hinged Power Cover for Dryer
Americas
Branson Ultrasonics Corp.
41 Eagle Road
Danbury, CT 06813-1961
T: 800-732-9262
F: 203- 796-2250
www.bransonultrasonics.com
Europe
Branson Ultraschall
Niederlassung der Emerson
Technologies GmbH & Co. OHG
Waldstrasse 53-55
63128 Dietzenbach, Germany
T: +49-6074-497-0
F: +49-6074-497-199
www.branson.eu
Basic Design
NOTE: Dimensions are in inches.
Asia
Branson Ultrasonics (Shanghai) Co., Ltd.
758 Rong Le Dong Road
Song Jiang, Shanghai, PRC, 201613
T: 86-21-3781-0588
F: 86-21-5774-5100
www.branson-china.com
OMNI 1620 © Branson Ultrasonics
Corporation 2013
The Emerson logo is a trademark
and service mark of Emerson
Electric Co. Revised and printed
in the U.S.A. 5/13
Loading...