eMeet technology M1 User Manual

Guarantee

User Manual

OfficeCore M1

User Manual

Packaging Contents

Features

Thank you for purchasing eMeet product. OceCore M1 is
the perfect solution for conference calls with its compact
design and outstanding sound quality.

360º omni-directional audio pick up and
8M(26ft) Far-field voice recognition

Built-in VoiceIA™ algorithm to ensure high quality
sound

Plug and play via Bluetooth or USB

12 hours talk time, 20 hours music playback and 1
month standby time, fully charge 2-3 iphone 7

Compact and portable design, take your business
trip anywhere at any time

Supports internet calls, such as Skype, Google
Hangout, Microsoft Lync, Cisco, Avaya, etc

Overview

①

②

③

⑥

⑧

Bluetooth

①

Volume down

③

Mic mute/ unmute

⑤

LED indication

⑦

USB output

⑨

1 2 3 4 5

Bluetooth / USB light

②

Volume up

④

Answer/ drop call

⑥

Power on/ o

⑧

Micro USB input

⑩

④

⑤

⑦

⑨

⑩

Using Guide

• Power ON/OFF

Power on:

Power o:

Checking
battery level:

Press and hold the power button for 2
seconds until the LED indication turns blue.

Press and hold the power button for 2
seconds until the LED indication turns blue.

Press the power button and the LED
indication turns green to show the current
battery level.

• Connecting via Bluetooth

ON

≤ 10m

eMeet

M1

Bluetooth
Pairing
Mode

Pairing with
Bluetooth:

Phone and
music via
Bluetooth:

M1 enters Bluetooth pairing mode
automatically for the first use. Press and hold
Bluetooth button for 3 seconds to switch
Bluetooth device. Bluetooth light flashes fast.

Enable Bluetooth of your device and search
Bluetooth devices available. Select “eMeet M1” from
the list and start the pairing. If a PIN is requested,
enter “0000”. Bluetooth light is solid blue when the
connection is completed successfully.

Make phone calls and play music via Bluetooth
once connected.

• Connecting via USB

Entering USB
mode:

Phone and
music via USB:

Connect M1 to your device by using a USB
cable and USB light turns solid orange.

Make phone calls and play music once
connected via USB cable.

• Charging and Recharging

Notice: Power adapter is not provided,
customer need to buy separately.

Recharging M1:

Charging your
smartphone:

Recharge M1 by using a USB charger with
DC 5V output or by connecting a laptop.
While recharging by a laptop, you can
make a call via M1 at the same time.
Power light is solid red while recharging
M1 .

Use M1 as a portable battery to charge
your smartphone.

Technical Data

Speaker Rated Output
Power

Frequency Response: 20Hz~20KHz

Signal/Noise Ratio:

Bluetooth® Version V4.1

Bluetooth® Range 10m

Mic Sensibility: 26dBFS

Mic Frequency
Response:

Mic Direction:

Battery: 3.7V/5200mAh

Charging Time: 3-4 hours

Play Time:

Recharging Input: 5V/2A

Dimension: 110x110x29mm

Weight: 273 g (main unit)

6 7 8 9 10 11

3W RMS

≥80dB

100Hz-10KHz

360° omni-directional

12 hours (call); 20 hours (music,
varies by content and volume level)

Troubleshooting

Symptom Possible Causes Solution

Fail to turn on

No sound

Distorted or
unclear sound

Fail to talk Wrong USB cable

Fail to recharge
M1

Low battery or
empty power

Disconnected or
low volume

Volume level too
high or too low

Malfunction of
charger or fully
recharged

Recharge

Check the
connection or
adjust volume of
connected device

Adjust volume of
connected device

Use original USB
cable

Use a proper
charger

Warning

Do not disassemble or repair the product yourself.

①

Always as for help from local dealer if necessary.

To preserve battery lifespan, fully recharge the

②

product when not in use for a long period of time or at
low battery level.

Never place the product near naked flames or other

③

heat sources, including direct sunlight.

Danger of explosion if batteries are incorrectly

④

replaced. Replace only with the same or equivalent
type.

The product should be placed in a dry, ventilated

⑤

place indoor. Never expose the product and
accessories to rain or water. Never cover the
ventilation slots or other openings on the product.

To protect environment, exhausted batteries should

⑥

be disposed of properly or return to the manufacturer.

Use this product in the
areas of an altitude of
no more than 2000
meters only.

* The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.

Use this product
in the non-tropical
regions only.

FCC

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and
receiver.

-- Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.