Embr Labs Embr Wave, WAVE1 User Manual
USER MANUAL VERSION 3.0
WELCOME!
Please read and keep this User Manual and take the
time to carefully read and follow the Important
Safety Instructions.
Welcome to Embr Wave!
Embr Wave is a thermal wristband that provides
thermal relief at the touch of a button.
Whenever you’re feeling uncomfortably warm or
cold, simply hold down the Light Bar for a session of
cool or warmth.
Embr Wave provides warming or cooling in the form
of rhythmic waves that are designed to maximize
your thermal comfort. Use this sensation to warm
up or cool down — anytime, anywhere.
What’s in the box?
Your Embr Wave box includes:
• Embr Wave thermal wristband
• Micro USB charging cable
• Storage pouch
• Quickstart guide
Want cool?
Hold here.
Want warmth?
Hold here.
2. ACTIVATING EMBR WAVE
warmer
colder
3. ADJUSTING THE TEMPERATURE
There are multiple levels of warming and cooling.
During operation, you can hold down the left side of
the Light Bar to lower the temperature, or the right
side to raise it.
For finer adjustments, you can also click the left or
right side of the Light Bar.
When in Warming Mode, Embr Wave will glow red.
When in Cooling Mode, it will glow blue.
When you’ve reached the maximum cooling or
warming temperature, the Light Bar will blink to let
you know!
Turning on and off
1. Click anywhere on the Light Bar to wake up the
device. The Light Bar will turn on.
2. Hold down the left (blue) side of the Light Bar to
start cooling, or the right (red) side to start warming. Release when the device has reached a pleasant
temperature.
3. Each cooling session lasts 3 minutes. Each
warming session lasts 5 minutes. You can repeat
sessions any time.
4. To turn off, firmly press the middle of the light
bar until you feel both sides click.
PRO TIP: If your session has ended in the last few
minutes, you can reactivate it by double-tapping the
aluminum body with your knuckle.
5. THE LIGHT BAR, CONTINUED
4. UNDERSTANDING THE LIGHT BAR
Embr Wave is
ramping to a
nice temperature.
The Light Bar will indicate the
status of your Embr Wave.
Initialization
When you hold down the left
(or right) side of the Light Bar,
Embr Wave will ramp up to
increasingly strong cooling (or
warming). The Light Bar will
animate to show that Embr
Wave is ramping up.
Temperature waves
Because the human body is more sensitive to temperature contrast than to static temperatures, Embr
Wave cools and warms in rhythmic waves.
PRO TIP: If you look closely, you’ll notice that the
Light Bar pulses brighter and dimmer to show you
the rhythm of the thermal waves.
Occasionally, Embr Wave will not be able to fulfill a
temperature request.
Too cold to start
If the device is too cold, a yellow and cyan light pattern will slowly fade in and out to indicate that it
needs to warm up — wear it against your skin for a
few seconds, and you should be all set!
Too warm to start
If Embr Wave is too hot to start a session, a yellow
and orange light pattern will slowly fade in and out.
Let it rest 3-5 minutes, or until the Light Bar turns
back off.
Overheated
If your device overheats, the entire Light Bar will
flash orange and red. If this happens, wait to use
your Embr Wave until it has cooled down.
Low battery
When the Light Bar flashes orange, Embr Wave is
running low on battery.
Loading...