EmberGlow LO18NG, LO24NG Installation & Operation Manual
INSTALLATION & OPERATION
MANUAL
FIREPLACE GAS LOG
TIERED DUAL BURNER LOG SET
LO18NG LO24NG
Burner set for use with all styles and sizes of SureHeat Dual Burner Natural Gas Log Sets.
May be used with accessory CVS303 or RVS304 Safety Pilot Kit for added convenience or for LP conversion.
WARNING:
explosion may result causing property damage, personal inju
— Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELLGAS
Do not try to light any appliance
•
Immediatly call the gas supplier from a neighbors phone. Follow the gas
•
supplier’s instructions.
If you cannot reach the gas supplier, call the fire department.
•
— Installation and service must be performed by a qualified installer, service agency,
or the gas supplier.
INSTALLER:Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
If the information in this manual is not followed exactly, a fire or
ry or loss of li
fe.
C
SHM INTERNATIONAL
Listed By
OMNI-Test Laboratores, Inc.
Portland
Oregon USA
Complies with ANSI Z21-84b-2004
DUAL BURNER
PARTS LIST
LO18NG LO24NG
1-6
Number of logs are determined by the size and model chosen.
Sets range from 6 to 7 logs.
Figure 1
GRANULES
(HEAVY WEIGHT BAG)
19
12
16
INSTALLATION & OPERATION
MANUAL
FIREPLACE GAS LOG
TIERED DUAL BURNER LOG SET
CCF18NG
CCF24NG
Burner set for use with all styles and sizes of SureHeat Dual Burner Natural Gas Log Sets.
May be used with accessory CVS 303 or RV S304 Safety Pilot Kit for added convenience or for LP conversion.
Iftheinformation inthism
anualisnot followedexactly, a fire or
WARNING:
e,personalinjury orloss
explosionmayresult causingpropertydamag
—Donot storeoruse gasolineorother flammablevaporsand liquidsinthe
vicinityofthis oranyother appliance.
—WHATTO DOIFYOU SMELLGAS
Do not try to light any appliance
•
Immediatlycallthegas supplierfroma neighborsphone.Followthe gas
•
supplier’s instructions.
Ifyoucannot reachthegas supplier,callthefire department.
•
—Installationand servicemustbe performedbya qualified installer, service agency,
orthegas supplier.
INSTALLER:Leavethismanual withthe appliance.
CONSUMER:Retainthis manualforfuture reference.
Listed By
Portland
Oregon USA
C
SHM INTERNATIONAL 2011
Complies withANSI Z21-84b-2004
OMNI-Test Laboratores, Inc.
GLOWING EMBERS
(LIGHT WEIGHT BAG)
17
oflife.
21
7
LEFTSIDE
KNOCKOUT PLUG
REF.
1-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
DESCRIPTION PART NUMBER QTY. QTY.PART NUMBER PART NUMBER
Logs —
Grate 1 1 1
Burner Pan SBNCJ00365A 1 1 1
Dual Burner Bar
3/4" Burner Support Spacer RMH-120-00420 1 RMH-120-00420 1
3/8"Brass Orifice Elbow WIP-120-00350 1 WIP-120-00350 1
3/8" Locknut RMH-120-00963 1 RMH-120-00963 1
3/8" Flare to 1/2" Gas Inlet Fitting RMH-120-00653 1 RMH-120-00653 1 RMH-120-00653 1
Damper Stop Clamp RMH-120-00100 1 RMH-120-00100 1
3/8" Flared Tubing 1 1 1
Granules WIP-130-00010 1 WIP-130-00010 1
Glowing Embers WIP-130-00300 1 WIP-130-00300 1
Back Log Standoffs 2 2 2
Thread Sealant RCSZZ00008A 1 1 1
Instruction Manual R84026CC 1 1 1
Washer RCODZ00145A 1 1 1RCODZ00145A RCODZ00145A
18
10
13
21
FLARED
9
11
8
END
TO
BURNER
BAR
TO 1/2" NPT
GASLINE
14
15
RIGHTSIDE
KNOCKOUT PLUG
18" SET
RCORJ00003A RCORJ00004A RCORJ00013A
RC0CB00002A
KHH-ACT16 KHH-ACT16 KHH-ACT16
SPSCJ00106A SPSCJ00106A SPSCJ00106A
QTY.
24" SET
—
—
— — —
SBNCJ00367A SBNCJ00366A
1 1
RC0CB00003A
RCSZZ00008A RCSZZ00008A
R84026CC R84026CC
30" SET
RC0CB00004A
RMH-120-00420
WIP-120-0035
RMH-120-00963
RMH-120-00100
WIP-130-00010
WIP-130-00300
1
1
1
1
1
2
2
2
WARNING: Improper use or installation may cause Carbon Monoxide Poisoning. Carbon Monoxide,
is an colorless and odorless gas, and is a by- product of combustion. Caution must be taken to insure
thefireplace is properly vented when logs are in use .To avoid having potentially dangerous fumes enter
the living area, be sure the chimney is drawing pro perly and has sufficient draft.
WARNING:
Do not burn wood, solid fuels, or other material in any fireplace fitted with a gas log set.
Do not store gasoline ammable vapors and liquids in the vicinity of this or any other appliance.
Do not place clothing or other
flammable material on or near the appliance.
Children and adults should be alearted to the hazards of high surface temperature and should
be kept clear to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the same room as the appliance.
Do not use this appliance if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to repl ace any part of the control system and any gas
control which has been under water.
A fireplace screen must be in place when appl iance is operating. Unless other provisions are
made for combustion air, the fireplace screen must have provisions for combustion air.
Installation of this Energy Efficient Gas Log Set and provisions for combustion and ventilation air
must conform with the National Fuel Gas Code ANSI Z223.1/NFPA54, and any local codes.
This gas log set is only to be installed and burned in a fully vented fireplace with a fully functional
damper and chimney that is free of any obstructions. The fireplace must be constructed of non-
combustible materials and approved to burn wood.
To operate this gas log set, the fireplace damper must be fully opened and locked.d
The smallest or minimum dimension of the chimney flue must be 8 inches in diameter . Do not use an
Energy efficient Gas Log Set if it is smaller than 8 inches. Do not use an EnergyEfficient Gas Log Set if
fumes from the burner emerge into the room when the damper is fully open. This indicates that there is
not adequate draft for this log set and it must not be used until the fireplace draft is corrected.
This appliance must be installed with a Damper Stop Clamp (Part #14). When operating this gas log set,
the flue damper must be fully open.
The nominal inlet gas pressure for this appliance i s 7” water column for natural gas.
This appliance must also be disconnected from the gas supply system by closing its individual manual
shutoff valve during any pressure testing at pressure equal to or less than 1/2 PSIG.
FIREPLACE PREPERATION
For installation in wood-burning fireplaces only. Keep damper wide open when in use. The appliance must be installed
with damper stop clamp. Minimum size chimne y flue must
be 8"with a 6" stack. (See installation instructions for further
reference to stack height and appliancedimensions).
A. Professionally clean chimney and fireplace floor of any
combustible material to limit the smell from the system
B. Open fireplace damper fully and install Damper Stop
Clamp with 1/4x2” set screw (Part 14#). This clamp is
Designed to allow an
y pilot combustion by-products to
vent (See Fig.2) Should the Damper Stop Clamp supplied not fit,
a permenant damper stop clamp must be
installed that will keep the damper open at a distance of
not less than 1 1/2”.
The damper must be in the fully open position anytime
the unit is in operation.
C. Prior to connecting the gas log set, make sure that the
gas
supply to the fireplace is completely shut off.
.
PREFABRICATED
FIREPLACE
Figure 2. Damper stop clamp
3
PART NO. 14
MASONRY
FIREPLACE
Loading...