EmberGlo Shish Kabob Kit User Manual

Service Bulletin

Installation of Shish Kabob Kit for
EmberGlo® Gas Char-Broilers

CAUTION: Read and understand this service bulletin thoroughly before starting. Only
a trained, experienced service technician should attempt this service procedure.

Quantity per

Parts List

Broiler Model

Kit number 4508-51 4508-52

Model Model Model

Description 25 31 41

1. Support Bracket - Left 2 2 2

2. Support Bracket - Right 2 2 2

3a. 30″ Support Bar - 2 2

3b. 20.5″ Support Bar 2 - -

4a. Skewer (24.0″) - 10 10

4b. Skewer (20.5″ ) 10 - -

Not shown

Not shown

3a

1

4a

Figure 1

2

1). Mount Support Brackets

Install the Support Brackets with the lowest support bar notch facing the front of the broiler. (Figures 2 and 3)

EmberGlo

A Div of Midco® International Inc.

4140 West Victoria Street
Chicago, Illinois 60646
toll free 866.705.0515
tel [phone]
fax [phone]
web www.emberglo.com
e-mail [e-mail]

1

Figure 2 - Left Side Figure 3 - Right Side

SAFETY INFORMATION TERMS: The following terms are used to identify hazards, safety precaution of
special notations and have standard meanings throughout this manual. They are printed in all capital letters
using a bold type face as shown below, and preceded by the exclamation mark symbol. When you see the
safety alert symbol and one of the safety information terms as shown below, be aware of the hazard potential.
DANGER: Identifi es the most serious hazards which will result in severe personal injury or
death.
WARNING: Signifi es a hazard that could result in personal injury or death.
CAUTION: Identifi es unsafe practices which would result in minor personal injury or product and
property damage.

Quality Designed for Proven Performance

2

712

8471 18

Printed in USA

2). Install Support Bars:

Place the support bars in the mounting brackets notches (Figure 4). Bars should be level with ends positioned in notches of the
same heights (Figure 5) to vary cooking time and temperature, raise or lower the support bars in the bracket notches.

Figure 4

3). Place Skewers on support bars:

Cuts of meat, vegetables, etc. are mounted on
the stainless steel skewers and placed on the
support bars (Figure 6).

Figure 6

Seafood Veggie Grate Placement on Support Bars

Figure 5

Skewer Placement on Support Bars

Figure 7

In addition to the use of shish kabob skewers, the
EmberGlo

®

stainless steel Seafood Veggie Grate
can be placed on the support bars to provide open
hearth grilling on 1/2 of the broiler hearth area.

Use FG-2 Seafood Veggie Grate on Model 31
and FG-3 Seafood Veggie Grate on Model 41
broilers (Figure 7). Note: the FG-1 Seafood
Veggie Grate for the Model 25 will cover the entire
hearth area.

2

toll free: 866 705 0515 - tel: [phone] - fax: [phone] - web: www.emberglo.com - e-mail: [e-mail]

EmberGlo A Division of Midco International - 4140 West Victoria Street - Chicago, Illinois 60646

712

8471 18

Printed in USA