EmberGlo ES10TI Parts List

Replacement Parts

List

EmberGlo® Steamer Model ES10T /
ES10PB

Tap Water Operation

Designed to Operate

Without Distilled Water

Manual Push Button Operation

Steamer with Direct Water Hookup

Full Size Food Pan

Items listed are replacement parts for the current Model ES10 Tap Water Steamer and
its components.

Installation and Service Manual - 8470-77

Date Code -

Model ES10 Þ rst construction May, 1983

EmberGlo

A Div of Midco® International Inc.

4140 West Victoria Street
Chicago, Illinois 60646
toll free 866.705.0514
tel [phone]
fax [phone]
web www.emberglo.com
e-mail [e-mail]

• EmberGlo Steamers do not require a separate hood for vapor produced during
operation according to the Uniform Mechanical Codes per the International
Conference of Building OfÞ cials Code.

AVOID ERROR IN PARTS SELECTION. When ordering use complete EmberGlo Part Number
and Description. Furnish Model Number, Bill of Material Number and Serial Number (if available)
from the speciÞ cation plate found on the product.

IMPORTANT: Availability of parts as well as speciÞ cations are subject to change without notice.

511

Quality Designed for Proven Performance

8472 62

Printed in USA

ES10 Exploded View

** Order 2535-15 for units prior to 2005

•Refer to listing

2

Part # Description Qty

1402-70 Water Inlet Assembly (complete) 1
1408-40 Bulk HD FTG 1
1408-70 Hose Assembly (complete) 1
1408-80 Hose 1
1411-20 Nozzle Assembly 2
1420-40 Hinge Spring 4
1425-00 Buzzer Assembly 120V-3200 watts 1
2504-00 Generator 120V - 3200 watts 1
2510-00 Cabinet Weldment 1
2511-00 Bottom Panel 1
2512-21 Switch Panel 1
2513-00 Water Inlet Tube 1
2514-00 Solenoid Water Tube 1

EmberGlo A Division of Midco International Inc

8472 62

ES10 Parts List

Part # Description Qty Part # Description Qty

2515-00 Left and Right Water Inlet Tube (2 required) 2
2516-00 Control Access Cover 1
2522-00 Lid Assembly 1
2523-80 Steam Deß ector 1
2525-60 Lid Handle (metal) 2
2526-00 Timer Panel 1
2526-10 20 Minute Timer Bracket 1
2527-00 Food Pan 1
2528-00 1-Meg OHM Potentiometer/Brn Wires 1
2528-10 1-Meg OHM Potentiometer/Blu Wires 1
2528-20 1-Meg OHM Potentiometer/Org Wires 1
2528-30 100K OHM Potentiometer/BluWht Wires 1
2528-40 1Meg OHM Potentiometer/BrnWht Wires 1
2528-80 680K In-line Resistor 1
2531-00 Timer Assembly Exterior 1
2532-00 Power Cord Assembly 1
2535-15 Timer for Units Prior to 2005 1
2536-00 4-Wire Assembly(F) 1
2539-00 Guard (Controls) 1
5608-51 Food Pan Grid 2
5616-90 Strain Relief (SR-6P-4) 1
5661-80 Aluminum Leg 4
8402-26 1Ú4 NPT Solenoid Valve (120 volt) 1
8406-62 Shot Timer 1
8406-63 Buzzer Timer 1
8406-64 20 Minute Timer 1
8408-39 Silicone Boot 4
8423-34 Lighted On-Off DPST Switch 1
8423-35 Mode Rocker Switch 1
8423-36 Push Button Switch 1
8425-41 Thermal Cut-off 1
8432-08 5Ú16 x 3Ú16 O-Ring 1
8445-18 Tapered Handle (Black Plastic) 1
8445-27 Knob-for 2528-40 1
8450-25 Rubber Feet 4
8451-46 Strainer 1
8451-47 Quick Connect Insert 1

8451-48 Quick Connect Body 1
8451-49 Female Hose Barb 2
8451-56 1/2! ID Hose Clamp
8483-14 1Ú8 MPT x 1Ú4T ST Brass Comp. Fit 1
8483-15 1Ú8 Brass Street Ell 1
8483-16 1Ú4 FPT x 1Ú4T Brass Comp. Ell 1
8483-20 1Ú4T x 1Ú4T x 1Ú8F Comp. Tee 1
8483-49 1Ú4 x 1Ú4T Str. Conn. 1

Not Shown
1404-00 Side Insulation 1
1404-20 Rear Insulation 1
1404-30 Bottom Insulation 1
1412-61 Nozzle Spring 1
1412-80 Water Connection Label 1
1420-00 Spring Bar 2
1421-45 Back Hinge Kit (less spring bar & spring) 2
2525-00 Lid Gasket 1
2540-50 Switch Panel Push Button Kit 1
2541-00 Wire Harness 1
2541-50 Switch Panel Timer Kit 1
5601-40 Generator Insulation 1
8408-96 Hubbel Receptacle 2
8425-08 Thermostat 1
8457-10 Strain Relief 1
8484-80 Snap Bushing (SB-500-6) 1
8484-84 Snap Bushing (SB-750-9) 1

Accessories - Not Shown
5608-71 TorPita -Tortilla/Pita Rack w/ Handle
5608-53 Mesh Food Pan Grid w/ Separator
5608-70 Three in 1 Basket Kit w/ Handle
5608-72 1/2 Size Basket w/ Handle
5608-73 Two of 1/4 Size Basket w/ Handle
5608-61 Egg Poacher 6 cup
8450-62 Steam Generator Cleaning Brush

ADJUSTABLE HINGE FOR 2-POSITION LID OPENING (60° OR 90° OPEN)

First construction January 29, 1990 (date code 0590). Steamers built before this date featured a 90° opening lid. Replacement parts for the early
construction are no longer available. When replacing order Part Number 1421-45 ADJUSTABLE HINGE RETROFIT KIT.

1

Part # or Description Qty
Item #

1 Adjustable Upper Hinge 1
2 Lid Stop Rivetment 1
3 Upper Hinge Bar 1
4 Adjustable Lower Hinge 1
5 5/16! x 3/16! O-Ring 2

Not Shown - (Sold Separately)
1420-00 Spring bar 2
1420-40 ES5 Hinge Spring 2

8472 62

3

4

5

EmberGlo A Division of Midco International Inc

2

3

4

5

3

4

toll free: 866 705 0515 - tel: [phone] - fax: [phone] - web: www.emberglo.com - e-mail: [e-mail]

EmberGlo - A Division of Midco International - 4140 West Victoria Street - Chicago, Illinois 60646

511

8472 62

Printed in USA