EmberGlo ES10T Parts List

Page 1
Designed to Operate
Without Distilled Water
EmberGlo
®
A Division of Midco International Inc.
4140 West Victoria Street Chicago, Illinois 60646 tel 866-705-0515 fax 866-580-8700 web www.emberglo.com
Quality Designed for Proven Performance
Direct Water Hook-up, Full Size Food Pan,
Manual and Push Button Operation
AVOID ERROR IN PARTS SELECTION. When ordering use complete EmberGlo part number and description; furnish steamer model number, date code, bill of material number, serial number and component nameplate data where available.
Replacement Parts
List
EmberGlo®Model ES10T / ES10PB
Items listed are replacement parts for the current Model ES10T/ES10PB Tap Water Steamer and its components.
Model ES10 first construction May, 1983.
EmberGlo Steamers do not require a separate hood for vapor produced during
operation according to the Uniform Mechanical Codes per the International Conference of Building Officials Code.
210
8472 62
Printed in U.S. A
Page 2
2
*Optional
** Order 2535-15 for units prior to 2005
Refer to listing
ES10 Exploded View
8425-41
5608-51
2512-21
/ 2535-15**
/ 2535-15**
Page 3
ADJUSTABLE HINGE FOR 2-POSITION LID OPENING (60° OR 90° OPEN)
First construction January 29, 1990 (date code 0590). Steamers built before this date featured a 90° opening lid. Replacement parts for the early construction are no longer available. When replacing any parts on the early design or if converting to 2-position lid opening, order Part Number 1421-45 ADJUSTABLE HINGE RETROFIT KIT.
PART NO.
1402-70 1408-70 1411-21 1420-40 1425-00 2504-00 2510-00 2511-00 2512-21 2513-00 2514-00 2515-00 2516-00 2522-00 2523-80 2525-60 2526-00 2526-10 2527-00 2528-00 2528-10 2528-20 2528-30 2528-40 2528-80 2531-00 2532-00 2535-15 2536-00 2539-00 2545-00 5608-51 5616-90 5661-80 8402-26 8406-62 8406-63 8406-64 8408-39 8423-34
DESCRIPTION
Water Inlet Assembly (complete) Hose Assembly (complete) Nozzle Assembly Hinge Spring (4 required) Buzzer Assembly 120V-3200 watts Generator 120V - 3200 watts Cabinet Weldment Bottom Panel Switch Panel Water Inlet Tube Solenoid Water Tube Left and Right Water Inlet Tube (2 required) Control Access Cover Lid Assembly Steam Deflector Lid Handle (metal) Timer Panel 20 Minute Timer Bracket Food Pan 1-Meg OHM Potentiometer/Brn Wires 1-Meg OHM Potentiometer/Blu Wires 1-Meg OHM Potentiometer/Org Wires 100K OHM Potentiometer/BluWht Wires 1Meg OHM Potentiometer/BrnWht Wires 680K In-line Resistor Timer Assembly Exterior Power Cord Assembly Timer for Units Prior to 2005 4-Wire Assembly(F) Guard (Controls) Mode Rocker Switch Food Pan Grid Strain Relief (SR-6P-4) Aluminum Leg 1⁄4 NPT Solenoid Valve (120 volt) Shot Timer Buzzer Timer 20 Minute Timer Silicone Boot (4 required) Lighted On-Off DPST Switch
PART NO.
8423-36 8425-41 8432-08 8445-18 8445-27 8450-25 8451-46 8451-47 8451-48 8451-49 8483-14 8483-15 8483-16 8483-20 8483-49
1404-00 1404-20 1404-30 1412-61 1412-80 1421-45 2540-50 2541-00 2541-50 5601-40 8408-96 8425-08 8457-10 8484-80 8484-84
5608-71 5608-53 5608-70 5608-72 5608-73 5608-61 8450-62
DESCRIPTION
Push Button Switch Thermal Cut-off 5⁄16 x 3⁄16 O-Ring Tapered Handle (Black Plastic) Knob-for 2528-40 Rubber Feet Strainer Quick Connect Insert Quick Connect Body Female Hose Barb (2 required) 1⁄8 MPT x 1⁄4T ST Brass Comp. Fit 1⁄8 Brass Street Ell 1⁄4 FPT x 1⁄4T Brass Comp. Ell 1⁄4T x 1⁄4T x 1⁄8F Comp. Tee 1⁄4 x 1⁄4T Str. Conn.
Not Shown
Side Insulation Rear Insulation Bottom Insulation Nozzle Spring Water Connection Label Back Hinge Kit (less spring bar & spring) Switch Panel Push Button Kit Wire Harness Switch Panel Timer Kit Generator Insulation Hubbel Receptacle Thermostat Strain Relief Snap Bushing (SB-500-6) Snap Bushing (SB-750-9)
Accessories - Not Shown
TorPita -Tortilla/Pita Rack w/ Handle Mesh Food Pan Grid w/ Separator Three in 1 Basket Kit w/ Handle 1/2 Size Basket w/ Handle Two of 1/4 Size Basket w/ Handle Egg Poacher Steam Generator Cleaning Brush
ES10 Parts List
EmberGlo
®
A division of Midco International Inc.
4140 West Victoria Street * Chicago, Illinois 60646
tel 866-705-0515 fax 866-580-8700 www.em b erglo.com email sales@emberglo.com
3
210
8472 62
Printed in U.S.A.
QTY
1 1 1 4 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 4 1 1 1 1 4 1
QTY
1 1 1 1 1 4 1 1 1 2 1 1 1 1 1
1 1 1 1 1
1 1 1 1 2 1 1 1 1
1 Adjustable Upper Hinge 1 2 Lid Stop Rivetment 1 3 Upper Hinge Bar 1 4 Adjustable Lower Hinge 1 5 5/16" x 3/16" O-Ring 2
Not Shown - (Sold separately) 1420-40 ES5 Hinge Spring 2
Item # Description Qty
Page 4
4
EmberGlo
®
A division of Midco International Inc.
4140 West Victoria Street * Chicago, Illinois 60646
tel 866-705-0515 fax 866-580-8700 web www.em b erglo.com email sales@emberglo.com
210
8472 62
Printed in U.S.A.
Loading...