EmberGlo E2412 Service Manual

Installation Service

Manual & Parts

Electric Broiler
E2412

EmberGlo

A Division of Midco International Inc.

4140 West Victoria Street
Chicago, Illinois 60646
tel [phone]
fax [phone]
web www.emberglo.com

Quality Designed for Proven Performance

307

8448-97

Warranty

Midco International Inc Express Limited Warranty Policy

Exclusions Terms, Customer Requirements and Instructions

Only Authorized Service Providers are authorized to provide Express Limited
Warranty service on all EmberGlo, a Division of Micdo International Inc., food
equipment as described under and Midco

®

International Express Limited Warranty

Policy. A list of providers can be found on our web site: www.emberglo.com

Provisions:

In lieu of an implied warranty, all repairs and replacement parts furnished under
our Express Limited Warranty shall be f.o.b. point of distribution, but the owner
must pay the necessary freight, delivery and labor costs involved when required.
Any Federal, State or Local taxes are also extra. This Express Limited Warranty is
effective for a period of 90 days from the date of original installation. If the prod

­uct registration cards are returned within those 90 days, the warranty will be one
year from date of installation. EmberGlo®Electric Food Preparation Equipment
manufactured by Midco International, sold under the EmberGlo trademark, are
guaranteed to be free from defect in material and workmanship under normal use
and service for a period of 90 days from the date of original installation or for 1
(one) year when the registration card is returned within a reasonable time after the
date of original installation. Midco's obligation under this Express Limited
Warranty Policy shall be limited to repairing or replacing, at our option, any part of
said equipment which Midco examination shall disclose to its satisfaction to be
thus defective.

Exclusions:

This Express Limited Warranty Policy does not apply to damages resulting from
accident, misuse, abuse or alteration, nor does it apply to limed steam generators,
nor does it apply to any consequential damages. Most geographical areas require
the use of distilled or demineralized water. Tap water is permissible only

with ES
Series Steamers. Nor does it apply to Barbriq's®, briquettes, or rods used in gas
broilers. Midco's obligation will be the replacement of the product or parts
removed.

SAFETY INFORMATION TERMS: The following terms are used to identify hazards, safety precautions or

special notations and have standard meanings throughout this manual. When you see the safety alert symbol
and one of the safety information terms, as shown below, be aware of the hazard potential.

DANGER: Identifies the most serious hazards which will result in sever personal injury or death.
WARNING: Signifies hazards that could result in personal injury or death.
CAUTION: Identifies unsafe practices which would result in minor personal injury or product and

property damage.

Terms:

Under the terms of this Express Limited Warranty Policy, models considered portable
(devices with cords and plug caps such as EmberGlo Steamers) must be taken or
returned to the nearest service provider, transportation prepaid, returned transporta­tion collect. Non-portable units with permanent wiring will be serviced on the cus­tomer's premises. Under these terms, Midco agrees, within the terms of this Express
Limited Warranty period, to make all repairs at no charge by the authorized service
provider. Labor and mileage charges submitted by any other provider not authorized
will be the responsibility of the customer.

Customer Requirements:

All charges related to repairs made after the 90 day or one (1) year, when the regis­tration card is returned within a reasonable time after the date of original installation,
during the Express Limited Warranty period will be the responsibility of the customer
unless the registration card has been properly filled out and returned to Midco
International Inc. The product registration information is located on the product I.D.
plate.

If a part is defective due to workmanship or materials and is removed from the product
within the applicable warranty period and returned to Midco in accordance with the following
procedure described, Midco will, at its option, either repair or replace the part.

Call the factory for Instructions on returned goods.

No equipment may be returned without written authoriza­tion from MIDCO. Returned goods must be shipped pre­paid to the factory.

WARNING: Improper installation and use of this

product could result in personal or property injury. No equip­ment may be returned without written authorization from
MIDCO. Returned goods must be shipped prepaid to the fac­tory. Warranty card must be filled in and returned to MIDCO
to validate warranty.

IMPORTANT: Cooking equipment should be used in an
environment protected by an automatic fire suppression
system. Consult the National Fire Protection Associations
(NFPA) Code 96, Standards for the Installation of Equipment
for Removal of Smoke and Grease Laden Vapors from
Commercial Cooking Equipment.

2

Installation

Installation and Exploded View

INSTALLATION

Wiring: All units are shipped wired for single phase current. If 3-

phase current is needed, wiring instructions are displayed on
wiring cover directly under the large grease hopper. USE COP­PER WIRE ONLY (75o C min.) FOR POWER SUPPLY CONNEC­TIONS.
Ventilation: Do not install broiler closer than 9" to back or side
walls. LEGS SHIPPED WITH THE UNIT MUST BE INSTALLED.
Minimum leg height, with no blockage around the bottom of the
broiler, must be maintained for proper ventilation.

FAILURE TO INSTALL OR REMOVAL OF THE LEGS IS A VIO­LATION OF THE APPROVAL SEALS AND VOIDS THE MANUFACTURER'S WARRANTY.

 Remove the leg channels packed in the broiler. The leg channels are two long pieces of U-

shaped steel designed to prevent warping of the broiler frame when the broiler is
moved by sliding on its legs.