EmberGlo 31 Parts Diagram
REPLACEMENT PARTS LIST
(SUPERSEDES EMB29)
Open Hearth
Gas Broiler
MODEL 31
Items listed are replacement parts for the current Model 31 Ember•Glo Broiler.
Model 31 first construction Sept. 1959. Dual pilot model with eight burners. Early models used two hearth blocks of
unequal size; later revised to utilize two equal blocks.
AVOID ERROR IN PARTS SELECTION. When ordering use complete Ember•Glo part number and description;
furnish broiler model number, serial number and component nameplate date where available.
PRINTED IN U.S.A.
798
8472-22
EMBER•GLO A DIVISION OF MIDCO INTERNATIONAL INC.
4140 WEST VICTORIA STREET • CHICAGO, ILLINOIS 60646 • (773) 604-8700 FAX: (773) 604-4070 • http://www.midco-intl.com
®
PART NO. DESCRIPTION
4507-12
1
4507-15
1
4508-10
1
4508-50
4510-10
1
4518-07
1
4569-00
4574-42
4
4574-44
4
4576-20
4577-01
4581-50
4629-20
1
Burner Tip
Burner Tip for Pilot
Burner Tile
Shish-ka-bob Holder
Grate Support Brick
Pilot Assembly
Flare-Trol Blower Wheel
Burner Orifice-#65 Drill (.035) PROPANE
Burner Orifice-#54 Drill (.055) NATURAL
Grate Rod 8-1/2”-sold 12 rods per pack only
(42 required)
Briquette Pack-sold 20 lb. pack only
(34 lb. required)
Main Valve Handle
Hearth Wall Block (Front & Back)
PART NO. DESCRIPTION
4630-02
1
4634-00
1,2
4708-10
4717-00
1
4724-00
1,3
8401-03
8416-35
8416-36
8423-01
8435-04
8445-03
Marinite
Floor Block
Ball Valve Assembly
Firebrick Filler Block
Cooking Grill
Pilot Valve
1/2 Regulator-NATURAL
1/2 Regulator-PROPANE
Flare-Trol Switch
Flare-Trol Motor 115V (Univ. Elec.
AB2P008N#, JB2P043N#; Fasco
7163-7512)
Pilot Valve Handle
1. Illustrated.
2. Early production runs were made using two block: one narrow placed in front and one wider in rear. Later floor
blocks are equal in size, and are installed side by side.
3. Diamond rod cooking grill: round rod grill no longer available. Brackets and instructions for conversion are provided.
4. A large portion of units manufactured 1968 through 1978 featured co-axial orifices (NATURAL and PROPANE).
These are no longer available and only fixed single gas orifices are available as replacements. Be sure to select the
proper orifice for the gas you are using.
5. “Plug” type valve (Lincoln valve) is no longer available. It is being replaced by a higher quality ball valve. The ball
valve requires a formed sheet metal Adapter Bracket to mate to the valve Stem Rod, use in place of the tubular
Valve Stem Connector with the older Lincoln valve.
-2-
Loading...