Ematic SoundBase ESB214 User Manual
Ematic SoundBase
ESB214
The LED display will be light up
Step 3: connect the SoundBase to the TV system
Step 4: Check your TV settings
To enjoy the full benefit of hearing TV audio through the SoundBse speaker
system, the internal speakers in your TV should be turned off. Also, you need
to make sure that some audio settings do not inhibit the audio output signal.
Connect the SoundBase ESB214 to your TV system
Step 2: Connect the SoundBase system to the Power
The SoundBse ESB214 is designed to fit
Placement guidance:
A. Move your TV aside and turn it so you
can see the connection panel.
B. Place the SoundBase ESB214 where you
had your TV.
The SoundBase ESB214 is designed to fit
under TVs that weigh no more than 40 lb
(18 kg) and have bases no wider than 20"
(508 mm) and no deeper than 10ΒΌ" (260
mm). Many 42" and most 32" TVs and
smaller meet these requirements.
Connect the Power adaptor to the SoundBase and the power source, Then turn on
the Power,The LED display will be light up.
Step1 : Place the system
Loading...