Ematic RIPPLE User Manual

User’s Manual

Storage & Precautions

Pairing with Your Device

Playing Media

Playback Controls

ChargingSpeaker Basics

Rugged Life Speaker

RIPPLE

• Store the speaker in a dry, ventilated
place away from children.

• Always make sure the speaker is powered
off before storing.

• Avoid storing the speaker in extreme
temperatures that may affect battery life
and speaker performance.

1. Turn on the speaker to enter Bluetooth mode.

2. The speaker will search for your device and
say “Waiting to connect to Bluetooth device”.
The indicator light will rapidly flash blue to
indicate the speaker is ready to pair.

3. Turn on Bluetooth on your device. Search for
the device “Ematic Ripple” and tap to connect.
The speaker will say “Connected” and the light
will slowly flash blue after the device is
connected.

The speaker should be connected to your
device through Bluetooth. When playing
music, the music will be automatically
transferred to the speaker.

4. You may have to enter a password on some
devices with an older version of Bluetooth.
Enter “0000” as the password and confirm it.

Connect the speaker with the USB cable to a
computer or charging port. The power button
will glow red while charging, and will turn off
when charging is complete.

Microphone

Power On / Off

Volume Up / Next

Answer Call / End Call

Play / Pause

MicroUSB Port

Volume Down / Back

Press to turn down the volume.
Hold to go back to the previous track.

Press to play or pause.

Press to turn up the volume.
Hold to go to the next track.

Entering Bluetooth mode

In Bluetooth mode

Charging Charging

Phone Calls

Troubleshooting

Technical Specifications Customer Support

• Bluetooth 2.0

• Transmission Frequency: 2.4GHz

• Output Power: 5W

• IPX5 Water Resistance

• Built-in 3.5V 500mAh Battery

• Playing Time: About 3-6 hours

• Charging Time: About 2 hours

• Unit Weight: 0.5lbs

When the speaker is connected to your
mobile device, your call audio will
automatically be transferred to the speaker.
This allows you to answer the phone
hands-free.

When you have an incoming call, the speaker
voice will broadcast the phone number. Press
the call button to answer the call.

Note: Music will automatically pause during a
call and will resume again when the call ends.

Press to answer or end a call.

I can’t hear anything
from the speaker.

Turn up the volume or make
sure the speaker is paired
with your device.

Check if bluetooth is on and
if your device is connected.
Please refer back to “Pairing
with Your Device”.

An object is obstructing the
Bluetooth connection
between the speaker and
your device or they are too
far apart. The speaker must
be within 33 ft. of your device.

I can’t connect to the
speaker wirelessly.

Can I connect more than
one Bluetooth device?

I can’t connect to the
speaker via Bluetooth.

I hear crackling.

No, only one Bluetooth device
can be connected at a time .

Problem Solution

OR

Visit ematic.us/support for customer support
regarding your device.

To submit a request, fill out the required information
online. You will be provided a ticket number
regarding your issue which you can refer to when
contacting us further.

©2015 Ematic. All Rights Reserved. Bluetooth and the Bluetooth logo
are trademark of Bluetooth SIG, Inc and used by Ematic under a license.
1 Year warranty from the date of purchase, 90 days only on labor. This
device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.1 year
warranty from date of purchase, 90 days only on labor.