Ematic Prime XL OMNI105600 User Manual

Genesis Prime XL – EGS102

User Manual

1

Since the tablet software updates regularly, the user manual may not cover all
aspects of new features.

Important Notices

• The new battery will be in its best condition after being fully charged and
discharged 2-3 times.

• While using earphones, if the volume is excessively high it may cause hearing
damage. Please adjust the volume of the player to a safe level and moderate
duration of use.

• Do not disconnect the tablet suddenly when formatting or uploading and downloading,
which can lead to program errors.

• Do not dismantle the tablet by yourself, and do not use alcohol, thinner or benzene to
clean its surface.

• Do not use the tablet while driving or walking.

• The tablet is not moisture and water resistant. Please do not use it in a damp

environment.

• Do not drop or hit the tablet against a hard surface, or the screen may be damaged or
cracked.

• Do not upgrade the firmware by yourself. The tablet should be upgraded with the
right firmware and right method offered by us. If upgrade is needed, please
contact us.

2

I. Getting Started

1.1 Turn on/off

1.1.1 Turn on

To start your tablet, press and hold the power key for 2 seconds. The Ematic logo
indicates that the tablet is loading.

Once the lock screen loads, drag the padlock icon to the right to unlock.

1.1.2 Turn off

When the tablet is on, to shut off your tablet, press and hold the power key until the
System options dialog appears and tap Power Off, then your tablet will shut down
dialog appears. Tap OK.

1.2 Lock/unlock the screen (sleep mode)

To save battery, you should put your tablet in sleep mode by turning off the LCD
display. To do this, press the power key and immediately release it. Do it again to
bring up the lock screen.

1.3 Connect to a computer

1.3.1 Connect to PC via USB cable

1. Connect the tablet to your computer by USB.

2. The device driver will install.

You can now copy files onto the tablet just as you would with a USB flash drive.

3. Remove the USB cable when you finish transferring files.

1.3.2 Connect to Mac® via USB cable

1. Connect the tablet to your computer by USB.

2. Go to android.com/filetransfer on your Mac and install the Android File Transfer
application.

3. The Android File Transfer application will launch automatically when you connect
the tablet to your computer by USB. Drag and drop files to transfer.

4. Remove the USB cable when you finish transferring files.

3

II. Your Home Screen

2.1 Icons on Home Screen

You can fill the home screen with any combination of shortcuts, widgets, and
folders you like.

When you power up your tablet for the first time, you‟ll see the main home-screen
panel. This panel is typically centered; you can access additional panels on either side
of the main one by swiping your finger left or right.

At the bottom of the Home Screen is your Status Bar.

Back – Go back to the previous screen.

Home – Go back to the home screen. Hold and slide up to access Google Now™.

Recent Apps – Opens a list of recent apps. Tap an app to open or swipe left/right to remove the thumbnail.

Decrease Volume

Increase Volume

Menu – Tap for more option or settings.

All Apps – View all your apps.

Google Search – Tap the microphone icon to search by voice.

2.2 Operations on Home Screen

2.2.1 Add app icon to home screen

Within the All Apps menu, touch and hold any icon for about 2 seconds, the icon will
become movable and appear on the home screen.

2.2.2 Remove app icon from home screen

On the main screen, touch and hold the undesired icon. Drag the item to the X and
release it when it turns red.

4