Ematic ESB210 User Manual

User Manual

Ematic - ESB210

Attaching the Stand Getting Started

Use the Non-Skid Pad

Connecting Your Device

Connect the Soundbar and
the audio line.

You can also use the non-skid pad to
install this unit on a shelf or TV Stand

Disconnect

Press the button downwards
to disconnect the stand from
the unit.

Be sure to put the bigger part
of the pad towards the front
panel of the unit.

Connect

Slide the supplied stand onto
the bottom of the main unit
until you hear a click.

Powering On

Make sure that the Soundbar is
plugged into a power source.
Push the on/off button on the
Soundbar or on the remote.
The Display Screen will light up
when powered on.

35W 2.1 Channel Sound bar w/ built-in subwoofer
Ultra-thin 55mm/2.2” deep
Compatible with LED/LCD TV’s
Frequency Response: 50Hz ~ 20KHz
Voltage AC: 100-240V/50-60Hz
Speaker Driver: 3” + 2.5” x 2
Input sensitivity: 850mVrms
Total Peak Power: 60W
USB, AUX in, AUX, MP3 Input

Press Mode button to switch to Bluetooth Mode.

Customer Support

Remote Control

Bluetooth™ Mode

Power button Mute volume

Equalizer

Next track/chapter

Volume up/down

Mode
Select USB/Line/RCA

Number buttons

Reset button

Play/Pause

Previous track/

chapter

USB Mode

AUX Mode

Press Mode button to switch to USB Mode.

Control playback using the play/pause/prev/next buttons.
Press and hold the prev/next buttons to increase/decrease volume.
Playback can also be controlled using the Remote Control.

Playback will stop if the USB drive is removed. The memory function
will continue playback from where it stopped when the USB drive is
inserted again.

Insert your USB Drive. The USB port is on the left side
of the soundbar.

Soundbar will automatically begin
playing music in the order listed on
your USB drive.

Press EQ button while in USB Mode to choose from a
list of preset equalizer options: classical, jazz, movie,
standard, etc.

Press Mode button to switch to AUX Mode.

Connect Soundbar to another device to stream music.

Note: MP3 Line-in and AUX Mode use the same audio input channel.
Both cannot be played at the same time.

Note: EQ function is not available in AUX Mode.