Ematic EPD105BL, EPD133BL User Manual

EPD105BL

Ematic 11.6"Portable DVD Player

1

Table Of Contents

Safety Precautions 1

Main Features 2

Package 3

Main Unit Controls 4

System Connection 5

The Remote Control 7

Basic operation 9

System Setup 13

Specification 17

Troubleshooting 18

Warning: To reduce the risk of fire or electric shock, do not expose this device to rain
or moisture.

1) Please read the instruction manual carefully and follow all the requirements of safe
operation.

2) Do not use this unit near water. Do not place the unit over any container with liquid
inside.

3) Do not install near any heat sources such as radiators, heat registers,stoves,or other
apparatus (including amplifiers) that produce heat.

4) Unplug this unit during lightning storms or when unused for long time.

5) About Cleaning: Unplug the system,use only a moist cloth to clean.Do not use liquid
detergent or aerosol.

6) Only use accessories specified by the manufacturer.

7) Refer all servicing to qualified service personnel when the unit has been damaged,
such as damaged power supply chords or plugs, spilt liquid in the device, exposure to
moisture, or if the device is not operating normally. Do not try to repair the device by
yourself due to the risk of high voltage and electric shock.

8) Do not use irregular shaped discs such as heart or star-shaped discs as they may
cause the unit to malfunction.

CAUTION

Hi-voltage, Do Not Open

Use care to avoid electric
shock

Thank you for choosing our portable DVD player. Please read the manual carefully prior
to use and keep it for future reference.

Safety Precautions

32

High brightness color 11.6" LCD screen

Compatible with disc of DVD, VCD, MP3, CD, JPEG etc

Built-in stereo speaker

Built-in rechargeable Lithium polymer battery

Support PAL or NTSC system

Support Multi-language OSD,speed forward/backward, repeat function

Package

Main Features

1

1

1

1

DVD Player

Remote Control with battery

AC/DC Power Adapter

User Manual

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Swiveling LCD screen

You can swivel the LCD screen of this player clockwise a maximun of 180 for use.°

Battery

Bat

tery

Main PCB

To remove the battery:
a. Unscrew the screws at the back of the unit.
b. Pull out the screws on the Main PCB board by the screwdriver to unpack the PCB board
and then the battery can be seen.
c. Remove the battery socket from the board.

Removal Of Waste Battery

5

4

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.

System Connection

Connecting to TV

You can also connect the unit to a TV to enjoy high quality picture and stereo sound.
Please refer to the following illustration:

Please use AV cable to connect the machine and the TV. Make sure it is connected
correctly.

TV

AUDIO IN

VIDEO IN

AV CABLE

Not supplied

Main Unit Controls

( )/ ( )/ ( ) /

( )

7. OK button

8. USB/CARD button

9. OPEN knob10.DC IN 9-12V

11.

12. AV OUT

13. Earphone jack

14. SD/MMC slot

15. USB jack

16. Rating label position

Power ON/OFF switch

1. SETUP button

2. MENU button

3. STOP button

4. PLAY/PAUSE button

5. MUTE button

6.

(Press shortly to STOP,

press longly to reduce volume.)

(Press shortly to play/pause,

press longly to add volume.)

1
2
3
4
5

6
7

8

9

11
12

13

14

15

17

10

SETUP

MENU

MUTE