Ematic eGlide 2 User Guide

Notes, Cautions, and Warnings

IMPORTANT:

Note: A NOTE indicates important information that helps you make better use of

your device.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Trademarks used in this text:

Adobe Acrobat is a trademark of Adobe Systems Incorporated which may be registered in certain jurisdictions; Microsoft, Windows, Microsoft Office Word, Microsoft Office Excel, and Microsoft Office PowerPoint, are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference and

2) this device must accept any interference received, including interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement: For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Must use included Transfer Box to transfer documents, music and videos onto the device.

Contents

1 Important Safety Precautions ............................................4

2 Cleaning Your Device .........................................................4

3 Package Contents...............................................................4

4 eGlide 2 Features................................................................5

5 Setting Up Your eGlide 2 Tablet ........................................7

Charge the device: ...................................................7

Battery Management................................................7

Turn the device ON: .................................................7

Settings.....................................................................8

Setup the Wi-Fi Enabled N

Transfer Box...........................................................10

ADSL Settings ........................................................10

3G Settings .............................................................11

MicroSD Card .........................................................12

6 Understanding Your eGlide 2 ..........................................13

Touch Screen .........................................................13

Screen Orientation .................................................13

Screen Lock............................................................14

Applications, Widgets, and Shortcuts..................14

etwork:..........................9

Desktop Screen......................................................15

Table of Contents | 2

Desktop Function Menu ........................................16

7 Applications ......................................................................18

Pre-loaded Applications ........................................18

WmtWeather ...........................................................19

Clock .......................................................................19

App Market .............................................................20

Browser...................................................................22

Calendar..................................................................23

Camera....................................................................23

Calculator ...............................................................24

Email .......................................................................24

File Browser ...........................................................26

My Music.................................................................27

My Video .................................................................29

My Photo.................................................................29

Contacts..................................................................

Picture Capture......................................................

Task Manager.........................................................

YouTube.................................................................

8 Frequently Asked Questions..........................................

31 31 32

Limitations of Liability Statement...................................

3 | Table of Contents

1 Important Safety Precautions

Always follow these basic safety precautions when using your device. This reduces the risk of fire, electric shock, and injury.

• Do not expose this product to rain or moisture.

• Keep the device out of direct sunlight and heat sources.

• Protect the power cord. Route power cords so they are not likely to be walked on

or pinched by items placed on or against them. Pay particular attention to the point where the cord attaches to the device.

• Only use the AC adapter included with the device. Using any other power

adapter voids your warranty.

• Do not remove the cover. There are no user-serviceable parts inside.

2 Cleaning Your Device

CAUTION: Treat the screen gently to avoid damage.

To clean fingerprints or dust from the screen, it is recommended that a soft, nonabrasive cloth, such as a camera lens cloth, be used.

3 Package Contents

Check the contents of your package to verify that you have the following:

eGlide 2 Tablet device

Quick Start Guide

Warranty Service Information

Power Adapter

Transfer Box

Earphone

Safety, Cleaning, and Package Contents | 4

4 eGlide 2 Features

Buttons/Connectors/Parts Functionality

Power • If the device is OFF, press and hold the power

button for 3 seconds to power ON the device.

• If the device is ON, press and hold the power button for 3 seconds and then tap OK on the screen to power OFF the device.

• If the device is in SLEEP MODE, press and release the power button quickly to turn sleep mode ON and OFF.

• If the device becomes unresponsive, press and hold the power button for 8 seconds to FORCE OFF the device.

NOTE: It is not recommended to use the FORCE OFF feature. Instead, follow the steps to perform a RESET.

5 | Features

Buttons/Connectors/Parts Functionality

Menu • Press to open or close the menu displaying

available options for the current application or actions for the current screen.

• Press and hold to display the on-screen keyboard for text input.

Volume • While playing media:

- Press and release to increase or decrease the volume one level at a time.

- Press and hold to increase or decrease the volume by larger incremental levels.

MicroSD Card Slot • Insert a microSD card into the microSD Card Slot.

NOTE: The device supports a maximum 32GB microSD card.

24-Pin Connector • Insert the transfer box into the 24-Pin connector to

use a USB storage device (U-disk) for accessing/storing photos, music, or video files.

Headphone • Connects to headphones and automatically

switches audio output from the audio speakers to the headset.

Power Interface • Connect the power adapter to an electrical outlet

and then connect to the device to charge the battery.

Reset

• Press the reset button to RESET the device.

NOTE: The reset button does not restart the device. Press the power button after the RESET button to reboot and to power ON the device.

CAUTION: RESET may erase all data on the

Back • Press to return to the previous screen, to close a

dialog box, a menu, or a message, and to dismiss the on-screen keyboard.

Front-Facing Camera Lens • Use for taking front view pictures (i.e., self

portraits).

Audio Speaker Audio output for video and music playback.

Features | 6

5 Setting Up Your eGlide 2 Tablet

Charge the device:

1 Plug the power adapter into an electrical wall outlet. 2 Connect the power adapter to the device’s power interface port to fully charge

the battery before use (approximately 4 hours).

a. While charging, the battery

indicator will fill/drain

green and have a picture of a lightning bolt.

b. When fully charged, the

battery indicator light

NOTE: The device cannot be charged via the 24-Pin Connector Port using the transfer box and a USB cable.

is green.

NOTE: The device can be used while the battery is charging, although the charging time is longer when operating and charging at the same time.

Battery Management

The battery is not fully charged out of the box, so it is recommended you charge the battery for at least 4 hours before you start to use the device.

The rechargeable battery is designed and manufactured to be used and recharged frequently. As with all batteries, the capacity of the battery reduces each time it is charged/depleted. However, you can still try to prolong the battery’s lifetime by following the suggestions below:

• Use your Tablet at least once a week.

• Charge the battery regularly and fully.

• Never leave the battery fully discharged for a long period of time.

• Always keep the device and the battery away from heat.

Turn the device ON:

1 Press and hold the power button for 3 seconds to power ON the device.

7 | Setup

Settings

Tap the Settings icon to access the menu(s) for the following preferences:

Menu Category Setting Name Function

Wireless & Networks

Ethernet Configure Ethernet network.

ADSL Settings Perform ADSL settings. Input username

Sound

Wi-Fi Enable Wi-Fi.

Wi-Fi Settings Setup and manage wireless access points.

Airplane Mode Disable all wireless connections.

3G Network Settings

Mass Storage Configure USB to mass storage. USB

ADB Configure USB to ADB.

Silent Mode Silence all sounds except media & alarms.

Volume To adjust the media, alarm, and notification

Notification Ringtone

Setup 3G network.

and password to connect.

volume. Finger slide the volume track control

and then tap OK.

Select desired ringtone sound.

Audible Selection Select to enable a sound when making a

screen selection.

Screen Lock Sounds

Display

Setup | 8

Brightness To adjust the screen brightness as desired.

Auto-Rotate Screen When enabled, the orientation of the

Screen Timeout Adjust the delay before the screen

Suspend Timeout Adjust the delay before the device

Play sounds when locking and unlocking the screen.

Finger slide the brightness track control

and then tap OK.

screen automatically changes between Portrait and Landscape when the device is rotated.

automatically turns off.

automatically suspends after the screen turns off.

Menu Category Setting Name Function

Security

Applications

Setup Screen Lock Lock screen with a pattern, PIN, or

password.

Visible Passwords Show password as you type.

Select Administrators

Use Secure Credential

Install from microSD Card

Set Password Set or change the credential storage

Clear Storage Clear credential storage of all contents and

Unknown Sources Allow application of non-market

Manage Applications

Running Services View and control currently running

Add or remove device administrators.

Allow applications to access secure certificates and other credentials.

Install encrypted certificates from microSD Card.

password.

rest its password.

applications.

Manage and remove installed applications

services.

Development Set options for application development.

Setup the Wi-Fi Network:

NOTE: Since many features require a Wi-Fi Enabled connection, it is recommended that the Wi-Fi Enabled network be set up with the first use of the device.

1 Tap the icon on the desktop. 2 Select Settings. 3 Select Wireless & network. 4 Select Wi-Fi to enable the Wi-Fi connection. 5 Allow the device to automatically scan and to list all the local Wi-Fi Networks

found.

NOTE: A indicates secure networks that require a login name/password to connect.

6 Tap the desired network to which you want to connect. 7 Enter the Network Password, if applicable. 8 Tap Connect.

NOTE: The wireless connection icon will appear in the status bar on the Desktop screen when the device is successfully connected to the Internet.

9 | Setup

Transfer Box

NOTE: You must use the transfer box to connect to a USB storage device (U-disk) for accessing/storing your photos, music, video, or eBook files, to connect to an Ethernet network, or to connect to a 3G wireless network card.

To connect to a USB device:

1 Insert a USB device (U-disk) into the transfer box.

2 Insert the transfer box into the 24-Pin interface on the tablet.

CAUTION: Don’t insert and remove the U-disk repeatedly in a short time, as this

may cause damage to the U-disk.

To connect to an Ethernet cable:

1 Insert the transfer box into the 24-Pin interface on the tablet.

2 Insert the Ethernet cable into the Ethernet interface on the transfer box.

3 Observe the device has automatically accessed the network IP address as

indicated by the appearance of ETH in the status bar on the Desktop screen.

4 Tap the Ethernet icon to manually connect to an IP address.

ADSL Settings

1 Tap the ADSL Settings application icon .

2 Input a username and password.

3 Select Connect to access the broadband network.

Setup | 10

3G Settings

NOTE: A 3G wireless network card (purchased separately) is required to connect to a 3G network.

The following is a list of 3G network specifications compatible with your device:

Channel Access Method Network Device

TD-CDMA TD368

WCDMA

To connect to a 3G wireless network:

1 Insert the USB connector of the 3G wireless network card into the transfer box.

2 Insert the transfer box into the 24-Pin interface on the tablet.

3 Observe the bright lights on the 3G wireless network card, which indicate the

card is receiving power and is ready to begin connection to the 3G network.

4 Tap the 3G Settings application icon .

5 Tap Add 3G network.

6 Enter a Name for the 3G network in the name field of the pop-up dialog box.

7 Observe that the network device field is selected for you by the tablet.

HUA WEI E220

HUA WEI E230

HUA WEI E160X

HUA WEI E169G

HUA WEI E1750

Bora 9380 CDMA2000

AWIT-U8

8 Enter the Device number and APN, which are available from your 3G wireless

network provider.

9 Optional: Enter a username and password.

10 Follow the on-screen directions to complete the setup of the 3G wireless network

card.

NOTE: When the 3G network card is successfully connected, the 3G icon will appear in the status bar on the Desktop screen.

11 | Setup

+ 23 hidden pages