Ematic ED909 User Manual
1
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
1) Please read the instruction manual carefully and follow all the requirements of safe
operation to operate the device.
2) Do not use this unit near water. Do not place the unit over any container with liquid
inside.
3) Do not install near any heat sources such as radiators, heat registers, stoves,or other
apparatus (including amplifiers) that produce heat.
4) Unplug this unit during lightning storms or when unused for long periods of time.
5) Cleaning: Unplug the system, use only wet cloth to clean. Do not use liquid detergent
or aerosol.
6) Only use accessories specified by the manufacturer.
7) Refer all servicing to qualified service personnel when the unit has been damaged,
such as damaged power supply cords or plugs, spilt liquid in the device, exposure to
moisture, or if the device is not operating normally. Don't try to repair the machine by
yourself because of the danger of high voltage and electric shock.
8) Do not use irregular shaped discs such as heart or star-shaped discs as they may
cause to the unit malfunction.
Hi-voltage, Don't Open it
Remind user to be careful to
avoid electric shock
Thank you for choosing our portable DVD player. It includes a 9" display and built-in
DVD player. This units is designed for use at home or on the go. Please read the manual
carefully prior to use and keep it for future reference.
Table Of Contents
Safety Precautions 1
Package 3
Main Features 3
Main Unit Controls 4
System Connection 5
The Remote Control 8
Basic operation 10
System Setup 18
Specification 22
Troubleshooting 23
Safety Precautions
32
High brightness color 9" LCD screen
Compatible with discs DVD, VCD, MP3, MPEG4, CD, JPEG, etc
Built-in stereo speaker
Supports PAL or NTSC system
Supports Multi-language OSD, speed forward/backward,repeat function
Zoom in/out function
Package
Main Features
1
1
1
1
1
1
1
2
DVD Player
9 '' LCD Monitor
Remote Control with battery
AC/DC Power Adapter
Cigarette Lighter Adapter
DC+Audio/Video Cable
User Manual
Car belts
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
5
4
Note:
1.Car cigarette lighter adaptor is not recommended to recharge the battery.
2.Car cigarette lighter adaptor can only be used when the car power supply is 9-12V.
3.The main plug is used as the disconnect device, the disconnect device should remain
readily operable.
Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
System Connection
AV OUT
DC OUT
SD
AV OUT
DC OUT
SD
Main Unit Controls
1. Open knob
2. Power ON/OFF switch
3. SETUP button
4. MODE button
5.
6. OK button
7. PLAY/PAUSE button
8. STOP button
9. DC IN 9-12V
10. DC OUT
11. AV OUT
12. Earphone jack
13. Volume knob
14. SD card slot
15. USB Port
16. Bracket
17. Rating label position
Monitor View
1. Power ON/OFF
2. Volume knob
3. Earphone jack
4. AV IN
5. DC IN 9-12V
6. Brightness knob
7. Bracket
8. Rating label position
17
( )/ ( )/ ( )/ ( )
CLOSE
1
2
15
3
4 567 8
9
10
11
12
13
14
16
AV OUT
DC OUT
ON OFF
2
3
4
5
1
ON OFF
BRIGHTNESS
7
CLOSE
8
6
SD
Loading...