Emag Emmi 05, Emmi 16 User manual

1. Description

1 SET - Start and cleaning time 4 CONNECTOR - Power supply
2 TIME - Display in minutes 5 TUB - Stainless steel
3 RESET - Stop 6 COVER

2. Technical Information

Characteristics Emmi 05 - 0,5 L Emmi 16 - 1,6 L

Height - inch (mm) 4.9 (127) 6.7 (170)
Width - inch (mm) 4.1 (105) 5.5 (140)
Depth - inch (mm) 7.7 (195) 9.1 (230)
Volume (l) 0,5 1,6
Tank - inch (mm) 6.9 x 3.2 x 1.6 (LxWxH)

(175 x 80 x 40) (LxBxH)

Main source (V) 230/60 HZ 2) 230/60 HZ 2)
Max. current (A) 0,5 0,8
Frequency (kHz) 50 54
Classification IP 20 IP 20
Wattage (approx.) 50 W 100 W

2) Optional – 110V/50Hz

- Technical changes reserved -

8.3 x 4.9 x 2.8 (LxWxH)

(210 x 120 x 70) (LxBxH)

3. Important notes before using the equipment

- The ultrasonic cleaner must only be operated with the main source voltage printed on the bottom
label (i.e. 110 V / 60 Hz or 220 V / 50 Hz).

- Don’t clean with ultrasonic cleaner animals or part of a human body ( fingernail etc. )

- The ultrasonic cleaner is not suitable for continuons operation.

- The ultrasonic cleaner must only be operated if filled with sufficient amount of water

(approx. three quarter of the tank volume).

- After a longer period of operation (i.e. 20 minutes) the rim of the tank may warm up.

Note:
It the tank is filled with fresh tapwater it is recommended to operate the equipment for approx. five
minutes in order to achieve outgassing of the water (best cleaning efficiency will be achieved it
tapwater is outgassed, or when distilled water is used.

4. Operating instructions

Fill tank ¾ with tap or distilled water, then plug in and switch on unit. Push SET button as many
times as you wish to set cleaning time ( one minute steps ). TIME display will show you the
adjusted cleaning time. Max. cleaning time is nine ( 9 ) minutes. The cleaning time to be chosen
depends on the degree of contamination of the object you wish to clean. If the cleaning time has
elapsed the time display will show the digit “0” ( zero ) and the operation of the equipment will
stop automatically. Aprox. Sixty ( 60 ) seconds after automatic stop of the equipment operation
the TIME display will be switched-off and a red dot will alight, which indicates the standby
status of the equipment. If the SET or RESET button is pushed again the equipment will
automatically be ready for operation. After the cleaning operation is terminated, take out the
cleaned object(s) from the tank and clean with water in order to remove loosened contamination
particles.
It is recommended that after the cleaning operation is terminated the water is emptied and the
tank is washed up and dried.

5. Examples for ultrasoniccleaning with recommended additions

- Jewelry, glasses, spectacle frames

( our recommendation of Liquid addition : EM-80 )

- Indian ink pens, drawning equipment´s and accessories

- Dental prothesis ( Liquid-concentrate: EM-70)

- Shear heads of razors, Cellphone Cover (Liquid – concentrate : EM-80 )

- Precicion engineering parts ( Liquid – concentrate : EM-80 )

- weapon parts and tools ( Liquid - concentrate : EM-300 Super plus)

- Coins, precious metals and many other objects ( Silver-Liquid : EM-100 )

6. Guarantee

This product is warranted against defects in manufacturing or materials for a period
of two year from the date of purchase. Defects may be corrected by repair, or by
replacement of the unit, at the option of the manufacturer.

This warranty may be voided if the unit is not operated in accordance with the
instructions provided by the manufacturer. The warranty my also be voided by the
opening of the unit, and/or its partial or total assembly, without prior factory
authorization.

Any claim made under this clause shall be directed to the seller, and shall be verified
by proof of purchase. The seller will advise the buyer concerning disposition of the
unit. The normal procedure shall be for the manufacturer to issue a warranty claim
number, and to authorize return of the unit to the factory. Buyer shall bear shipping
costs.

EMAG AG

Wolfsgartenstraße 5

D- 64546 Mörfelden-Walldorf / Germany

Tel.: 00 49 – (0) 180 – 3684306090 (Technical Hotline)

Tel.: 0049 – (0) 6105 - 923666

Fax : + 49 – 6105 – 923418

Email: [e-mail]

http://www.emag-germany.de

Sales date

Stamp of the salesman

Subject to change

THE NEW GENERATION OF ULTRASONIC CLEANERS

- Digital Technology -

MADE IN GERMANY

• Easy operation by only two push - buttons

• Digital timer with automatic stop

• Efficient cleaning with water only

• Two convenient sizes available

* ATTRACTIVE DESIGN – HIGH EFFICIENCY *