eMachines E510 User Manual

eMachines E510 Series

User's Guide

Copyright © 2008.
All Rights Reserved.

eMachines E510 Series User's Guide
Original Issue: 05/2008

Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.

Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.

eMachines E510 Series Notebook PC

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

eMachines and the eMachines logo are registered trademarks of Acer Incorporated. Other
companies' product names or trademarks are used herein for identification purposes only and
belong to their respective companies.

Information for your safety and comfort

Safety instructions

Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CAUTION for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to
the power supply unit:

Install the power supply unit before connecting the power cord to the AC
power outlet.

Unplug the power cord before removing the power supply unit from the
computer.

If the system has multiple sources of power, disconnect power from the system
by unplugging all power cords from the power supplies.

iii

CAUTION for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.

CAUTION for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Warnings

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

iv

operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor
devices, HDD, Optical drive, and even exposure risk from lithium battery
pack.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult
your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.

Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.

Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need

•

to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6
meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.

v

Guidelines for safe battery usage

This notebook uses a Lithium-ion battery. Do not use it in a humid, wet or
corrosive environment. Do not put, store or leave your product in or near a heat
source, in a high temperature location, in strong direct sunlight, in a microwave
oven or in a pressurized container, and do not expose it to temperatures over
60°C (140°F). Failure to follow these guidelines may cause the battery to leak
acid, become hot, explode or ignite and cause injury and/or damage. Do not
pierce, open or disassemble the battery. If the battery leaks and you come into
contact with the leaked fluids, rinse thoroughly with water and seek medical
attention immediately. For safety reasons, and to prolong the lifetime of the
battery, charging will not occur at temperatures below 0°C (32°F) or above 40°C
(104°F).

The full performance of a new battery is achieved only after two or three
complete charge and discharge cycles. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. When the
operation time becomes noticeably shorter than normal, buy a new battery. Use
only eMachines approved batteries, and recharge your battery only with
eMachines approved chargers designated for this device.

vi

Use the battery only for its intended purpose. Never use any charger or battery
that is damaged. Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object such as a coin, clip or pen causes direct connection
of the positive (+) and negative (-) terminals of the battery. (These look like
metal strips on the battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the terminals may
damage the battery or the connecting object.

The capacity and lifetime of the battery will be reduced if the battery is left in
hot or cold places, such as in a closed car in summer or winter. Always try to
keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or
cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is especially limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.

Wireless devices may be susceptible to interference from the battery, which
could affect performance.

Potentially explosive environments

Switch off your device in any area with a potentially explosive atmosphere and
obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even
death. Switch off the notebook near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage and
distribution areas; chemical plants; or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not always,
marked. They include below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as propane or butane),
and areas where the air contains chemicals or particles such as grain, dust or
metal powders. Do not switch the notebook on when wireless phone use is
prohibited or when it may cause interference or danger.

Replacing the battery pack

The notebook uses lithium batteries. Replace the battery with the same type as
that which came bundled with your product. Use of another battery may
present a risk of fire or explosion.

Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from
children. Follow local regulations when disposing of used
batteries.

Telephone line safety

• Disconnect all telephone lines from the equipment when not in use and/or

before servicing.

vii

To avoid the remote risk of electric shock from lightning, do not connect

•

the telephone line to this equipment during lightning or thunderstorms.

Warning! For safety reasons, do not use non-compliant parts
when adding or changing components. Consult your reseller for
purchase options.

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.

Operating environment

Warning! For safety reasons, turn off all wireless or radio
transmitting devices when using your laptop under the following
conditions. These devices may include, but are not limited to:
wireless lan (WLAN), Bluetooth and/or 3G.

Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body (refer to the figure below). It should not contain metal and you should
position the device the above-stated distance from your body. To successfully
transmit data files or messages, this device requires a good quality connection
to the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed. Parts of
the device are magnetic. Metallic materials may be attracted to the device, and
persons with hearing aids should not hold the device to the ear with the
hearing aid. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF transmissions..

Pacemakers. Pacemaker manufacturers recommend that a minimum separation
of 15.3 centimeters (6 inches) be maintained between wireless devices and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and

viii

recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:

• Always keep the device more than 15.3 centimeters (6 inches) from the

pacemaker

• Not carry the device near your pacemaker when the device is switched o. If

you suspect interference, switch off your device, and move it

Hearing aids. Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.

.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added. Only
qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed, and the air bag inflates, serious injury could result. Using your device
while flying in aircraft is prohibited. Switch off your device before boarding an
aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be
illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.

Emergency calls

Warning: You cannot make emergency calls through this device. To make an
emergency call you shall dial out through your mobile phone or other
telephone call system.

Disposal instructions

Do not throw this electronic device into the trash when discarding.
To minimize pollution and ensure utmost protection of the global environment,
please recycle. For more information on the Waste from Electrical and
Electronics Equipment (WEEE) regulations, visit
http://global.acer.com/about/sustainability.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org
information, check www.lamprecycle.org

. For lamp-specific disposal

.

ix

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use.
Users are also at risk of physical injury after long hours of working in front of a
computer. Long work periods, bad posture, poor work habits, stress,
inadequate working conditions, personal health and other factors greatly
increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,
tenosynovitis or other musculoskeletal disorders. The following symptoms may
appear in the hands, wrists, arms, shoulders, neck or back:

• numbness, or a burning or tingling sensation

• aching, soreness or tenderness

• pain, swelling or throbbing

• stiffness or tightness

x

coldness or weakness

•

If you have these symptoms, or any other recurring or persistent discomfort
and/or pain related to computer use, consult a physician immediately and
inform your company's health and safety department.

The following section provides tips for more comfortable computer use.

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a
footrest, or raising your sitting height to achieve maximum comfort. Observe
the following tips:

• refrain from staying too long in one fixed posture

• avoid slouching forward and/or leaning backward

• stand up and walk around regularly to remove the strain on your leg

muscles

• take short rests to relax your neck and shoulders

• avoid tensing your muscles or shrugging your shoulders

• install the external display, keyboard and mouse properly and within

comfortable reach

• if you view your monitor more than your documents, place the display at

the center of your desk to minimize neck strain

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive
room lighting, poorly focused screens, very small typefaces and low-contrast
displays could stress your eyes. The following sections provide suggestions on
how to reduce eyestrain.

Eyes

• Rest your eyes frequently.

• Give your eyes regular breaks by looking away from the monitor and

focusing on a distant point.

• Blink frequently to keep your eyes from drying out.

Display

• Keep your display clean.

• Keep your head at a higher level than the top edge of the display so your

eyes point downward when looking at the middle of the display.

• Adjust the display brightness and/or contrast to a comfortable level for

enhanced text readability and graphics clarity.

• Eliminate glare and reflections by:

• placing your display in such a way that the side faces the window or

any light source

• minimizing room light by using drapes, shades or blinds

• using a task light

• changing the display's viewing angle

using a glare-reduction filter

•

• using a display visor, such as a piece of cardboard extended from the

display's top front edge

• Avoid adjusting your display to an awkward viewing angle.

• Avoid looking at bright light sources, such as open windows, for extended

periods of time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing
and productive:

• Take short breaks regularly and often.

• Perform some stretching exercises.

• Breathe fresh air as often as possible.

• Exercise regularly and maintain a healthy body.

Warning! We do not recommend using the computer on a couch
or bed. If this is unavoidable, work for only short periods, take
breaks regularly, and do some stretching exercises.

Note: For more information, please refer to "Regulations and
safety notices" on page 35 in the eMachinesSystem User's Guide.

xi

xii

Federal Communications Comission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.

The following local manufacturer/importer is responsible for this declaration:

Product name: Notebook PC

Model number: ICL50

Machine type: eMachines E510

SKU number: eMachines E510-xxxxx

("x" = 0 - 9, a - z, or A - Z)

Name of responsible party: Acer America Corporation

Address of responsible party: 333 West San Carlos St.

Contact person: Acer Representitive

Tel: [phone]

Fax: [phone]

San Jose, CA 95110
USA

xiii

We,
Acer Computer (Shanghai) Limited
3F, No. 168 Xizang medium road, Huangpu
District,
Shanghai, China

Contact Person: Mr. Easy Lai
Tel: [phone] Fax: [phone]
E-mail: [e-mail]
Hereby declare that:

Product: Notebook PC Trade Name: eMachines

Model Number: ICL50 Machine Type: eMachines E510

SKU Number: eMachines E510-xxxxx ("x" = 0~9, a ~ z, or A ~ Z)

Is compliant with the essential requirements and other relevant provisions of the following
EC directives, and that all the necessary steps have been taken and are in force to assure
that production units of the same product will continue comply with the requirements.

EMC Directive 2004/108/EC as attested by conformity with the following harmonized
standards:

-. EN55022:1998 + A1:2000 + A2:2003, AS/NZS CISPR22:2002, Class B

-. EN55024:1998 + A1:2001 + A2:2003

-. EN61000-3-2:2000 + A2:2005, Class D

-. EN61000-3-3:1995 + A1:2001 + A2:2005

Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized
standard:

-. EN60950-1:2001 + A11:2004

Council Decision 98/482/EC (CTR21) for pan- European single terminal connection to the
Public Switched Telephone Network (PSTN).

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized
standard:

• Article 3.1(a) Health and Safety

-. EN60950-1:2001+ A11:2004

-. EN50371:2002

• Article 3.1(b) EMC

-. EN301 489-1 V1.4.1

-. EN301 489-3 V1.4.1

-. EN301 489-17 V1.2.1

• Article 3.2 Spectrum Usages

-. EN300 328 V1.6.1

-. EN301 893 V1.2.3
CE Issued Date: 29 February 2008

Easy Lai / Director Date
Acer Computer (Shanghai) Limited

29 Feb 2008

xiv

First things first

We would like to thank you for making an eMachines notebook your choice for
meeting your mobile computing needs.

Your guides

To help you use your eMachines notebook, we have designed a set of guides:

First off, the Just for Starters... poster helps you get started with
setting up your computer.

The printed User's Guide introduces you to the basic features and
functions of your new computer. For more on how your computer
can help you to be more productive, please refer to the
eMachinesSystem User's Guide. This guide contains detailed
information on such subjects as system utilities, data recovery,
expansion options and troubleshooting. In addition it contains
warranty information and the general regulations and safety
notices for your notebook. It is available in Portable Document
Format (PDF) and comes preloaded on your notebook.

To view the user guide, click on eMachinesSystem User's Guide.
Note: Viewing the file requires Adobe Reader.

Basic care and tips for using your computer

Turning your computer on and off

To turn on the computer, simply press and release the power button below the
LCD screen beside the easy-launch buttons. See "Top view" on page 1 for the
location of the power button.

xv

To turn the power off, do any of the following:

• In Windows, click on Start then click on Shut Down.

• In Linpus™ Linux

Computer.

®

, click on K Menu , choose Log Out, then click Turn Off

• Use the power button

• You can also put the computer in sleep mode by pressing the sleep hotkey

<Fn> + <F4>.

Note: If you cannot power off the computer normally, press and
hold the power button for more than four seconds to shut down
the computer. If you turn off the computer and want to turn it on
again, wait at least two seconds before powering up.

Taking care of your computer

Your computer will serve you well if you take care of it.

• Do not expose the computer to direct sunlight. Do not place it near sources

of heat, such as a radiator.

• Do not expose the computer to temperatures below 0 ºC (32 ºF) or above

50 ºC (122 ºF).

• Do not subject the computer to magnetic fields.

• Do not expose the computer to rain or moisture.

• Do not spill water or any liquid on the computer.

• Do not subject the computer to heavy shock or vibration.

• Do not expose the computer to dust or dirt.

• Never place objects on top of the computer.

• Do not slam the computer display when you close it.

• Never place the computer on uneven surfaces.

Taking care of your AC adapter

Here are some ways to take care of your AC adapter:

• Do not connect the adapter to any other device.

• Do not step on the power cord or place heavy objects on top of it.

Carefully route the power cord and any cables away from foot traffic.

• When unplugging the power cord, do not pull on the cord itself but pull

on the plug.

• The total ampere ratings of the equipment plugged in should not exceed

the ampere rating of the cord if you are using an extension cord. Also, the
total current rating of all equipment plugged into a single wall outlet
should not exceed the fuse rating.

xvi

Taking care of your battery pack

Here are some ways to take care of your battery pack:

• Use only batteries of the same kind as replacements. Turn the power off

before removing or replacing batteries.

• Do not tamper with batteries. Keep them away from children.

• Dispose of used batteries according to local regulations. Recycle if possible.

Cleaning and servicing

When cleaning the computer, follow these steps:
1 Turn off the computer and remove the battery pack.
2 Disconnect the AC adapter.

3 Use a soft, moist cloth. Do not use liquid or aerosol cleaners.
If either of the following occurs:

• the computer has been dropped or the body has been damaged;

• the computer does not operate normally

please refer to "Frequently asked questions" on page 17.

Information for your safety and comfort iii

Safety instructions iii
Additional safety information vii
Operating environment vii
Medical devices vii
Vehicles viii
Potentially explosive environments viii
Emergency calls ix
Disposal instructions ix
Tips and information for comfortable use ix
Federal Communications Comission
Declaration of Conformity xii

xiii

First things first xiv

Your guides xiv
Basic care and tips for using your computer xiv

Turning your computer on and off xiv
Taking care of your computer xv
Taking care of your AC adapter xv
Taking care of your battery pack xvi
Cleaning and servicing xvi

Your eMachines notebook tour 1

Top view 1
Closed front view 3
Left view 3
Right view 4
Rear view 4
Base view 5

Contents

Specifications 6
Touchpad 8

Touchpad basics 8

Using the keyboard 10

Lock keys and embedded numeric keypad 10
Windows keys (only for certain models) 11
Hotkeys (only for certain models) 12
Special keys 13

Using your Linpus™ Linux®
(only for certain models) 14

Network configuration 14

Setting up wireless network 14

Using K3b 14

Burning data on CD 14

Language settings 15

Frequently asked questions 17
Battery pack 20

Battery pack characteristics 20

Maximizing the battery's life 20
Installing and removing the battery pack 21
Charging the battery 22
Checking the battery level 22
Optimising battery life 22
Battery-low warning 23

Taking your notebook PC with you 24

Disconnecting from the desktop 24
Moving around 24

Preparing the computer 24

What to bring to meetings 25
Taking the computer home 25

Preparing the computer 25

What to take with you 25

Special considerations 26

Setting up a home office 26
Traveling with the computer 26

Preparing the computer 26

What to take with you 26

Special considerations 27
Traveling internationally with the computer 27

Preparing the computer 27

What to bring with you 27

Special considerations 27

Securing your computer 28

Using a computer security lock 28
Using passwords 28

Entering passwords 29

Setting passwords 29

Expanding through options 30

Connectivity options 30

Built-in network feature 30

Universal Serial Bus (USB) 31
Installing memory 31

BIOS utility 32

Boot sequence 32
Enable disk-to-disk recovery
(only for certain models) 32
Password 32

Playing DVD movies (only for certain models) 33

Troubleshooting 34

Troubleshooting tips 34
Error messages 34

Regulations and safety notices 35

FCC notice 35
Modem notices 36
Laser compliance statement 39
LCD pixel statement 39
Macrovision copyright protection notice 39
Radio device regulatory notice 40
General 40
European Union (EU) 40
The FCC RF safety requirement 41
Canada — Low-power license-exempt radio
communication devices (RSS-210) 42
LCD panel ergonomic specifications 43

Index 44

1

Your eMachines notebook tour

English

After setting up your computer as illustrated in the Just for Starters... poster,
let us show you around your new eMachines notebook.

Top view

1
2

3

4
5

11

6

7

12

8
9

10
11

# ICON Item Description
1 Microphone Internal microphone for sound recording.

2

# ICON Item Description
2 Integrated

webcam

Web camera for video communication.
(for selected models)

3 Display screen Also called Liquid-Crystal Display (LCD),

displays computer output.
4 Power button Turns the computer on and off.
5 Wireless

communication
button/indicator

Enables/disables the wireless function.

Indicates the status of wireless LAN

communication.
6 Speakers Left and right speakers deliver stereo audio

output.
7 Keyboard For entering data into your computer.
8 Palmrest Comfortable support area for your hands

when you use the computer.
9 Touchpad Touch-sensitive pointing device which

functions like a computer mouse.
10 Click buttons (left,

center and right)

The left and right buttons function like the

left and right mouse buttons; the center

button serves as a 4-way scroll button.
11

Power

Battery

1

1

Indicates the computer's power status.

Indicates the computer's batttery status.

1. Charging: The light shows amber when

the battery is charging.

2. Fully charged: The light shows green

when in AC mode.

HDD Indicates when the hard disk drive is active.

English

Num Lock Lights up when Num Lock is activated.

Caps Lock Lights up when Caps Lock is activated.

12 <Fn>

Volume up Increases the sound volume.

+

<>
<Fn>

Volume down Decreases the sound volume.

+

<>

1. The front panel indicators are visible even when the computer cover is closed
up.

English

3

Closed front view

12 3

# Icon Item Description
1 Microphone-in jack Accepts input from external

microphones.

2 Headphones/speaker/

line-out jack

3 Latch Locks and releases the lid.

Connects to audio line-out devices
(e.g., speakers, headphones).

Left view

12 34

# Icon Item Description
1 Kensington lock slot Connects to a Kensington-compatible

2 External display

(VGA) port

3 Ethernet (RJ-45) port Connects to an Ethernet 10/100-based

4 2 USB 2.0 ports Connect to USB 2.0 devices (e.g., USB

computer security lock.
Note: Wrap the computer security lock

cable around an immovable object such
as a table or handle of a locked drawer.
Insert the lock into the notch and turn
the key to secure the lock. Some keyless
models are also available.

Connects to a display device
(e.g., external monitor, LCD projector).

network.

mouse, USB camera).

4

Right view

1 3 4 52

# Icon Item Description
1 USB 2.0 port Connect to USB 2.0 devices

(e.g., USB mouse, USB camera).
2 Optical drive Internal optical drive; accepts CDs or DVDs
3 Optical disk

access indicator

4 Optical drive

eject button

5Emergency

eject hole

Lights up when the optical drive is active.

Ejects the optical disk from the drive.

Ejects the optical drive tray when the

computer is turned off.

Note: Insert a paper clip to the emergency

eject hole to eject the optical drive tray when

the computer is off.

Rear view

English

1 2

# Icon Item Description
1 DC-in jack Connects to an AC adapter.

2 Ventilation slots Enable the computer to stay cool, even after

prolonged use.

English

5

Base view

1
2

3
4

5

# Icon Item Description
1 Battery bay Houses the computer's battery pack.

2 Battery release latch Releases the battery for removal.

3 Battery lock Locks the battery in position.

4Memory

compartment

5 Hard disk bay Houses the computer's hard disk (secured

6 Ventilation slots and

cooling fan

Houses the computer's main memory.

with screws).

Enable the computer to stay cool, even after
prolonged use.
Note: Do not cover or obstruct the opening
of the fan.

6

6

Specifications

Operating
system

Platform

• Linpus

• Genuine Windows Vista*

• Intel

• Mobile Intel

• IEEE 802.11b/g

System memory Dual Channel DDR2 SDRAM support

Display 15.4" WXGA 1280 x 800
Graphics

Storage
subsystem

Audio

Up to 1 GB of DDR2 533 MHz memory, upgradeable to 2
GB using two soDIMM modules (dual-channel support)

• Mobile Intel

• 80/120/160/250 GB or larger hard disk drive

• Optical drive options:*

* This version of Linpus

• High-definition audio support with two built-in

Communication

Dimensions
and weight

Power
subsystem

Special keys and
controls

• Video conference:

• WLAN: IEEE 802.11b/g

• LAN: Fast Ethernet; Wake-on-LAN ready

• Modem: 56K ITU V.92 with PTT approval;

• 366 (W) x 274 (D) x 33.6/42.6 (H) mm

• 2.80 kg (6.17 lbs.) with 6-cell battery pack

• ACPI 3.0 CPU power management standard: supports

• 44.4 W 4000 mAh Li-ion battery pack (6-cell)

• 3-pin 65 W AC adapter

• 88-/89-key keyboard

• Seamless touchpad

™

Linux® console/X-Windows version*

®

Celeron® processor

®

GL960 Express Chipset

®

®

(Intel

• DVD-Super Multi double-layer drive

• DVD/CD-RW combo drive

stereo speakers

• Integrated webcam

• Built-in microphone

Wake-on-Ring ready

(14.4 x 10.8 x 1.3/1.7 inches)

Standby and Hibernation power-saving modes

GL960 Express Chipset

Graphics Media Accelerator X3100)

™

Linux® only supports audio CD playback.

English

7

English

I/O interface

Options and
accessories

Software
Environment

Note: "*" only for certain models

Note: The specifications listed above are for reference only. The
exact configuration of your PC depends on the model purchased.

• Three USB 2.0 ports

• External display (VGA) port

• Headphones/speaker/line-out jack

• Microphone-in jack

• Ethernet (RJ-45) port

• DC-in jack for AC adapter

• 512 MB or 1 GB DDR2 soDIMM modules

• 6-cell Li-ion battery pack

• 3-pin 65 W AC adapter

• External USB floppy disk drive

• Adobe

®

Reader

®

• Temperature:

• Operating: 5 °C to 35 °C

• Non-operating: -20 °C to 65 °C

• Humidity (non-condensing):

• Operating: 20% to 80%

• Non-operating: 20% to 80%

8

Touchpad

The built-in seamless touchpad is a pointing device that senses movement on its
surface. This means the cursor responds as you move your finger across the
surface of the touchpad. The central location on the palmrest provides
optimum comfort and support.

Touchpad basics

The following items show you how to use the touchpad:

12 3 4

• Move your finger across the touchpad (2) to move the cursor.

• Press the left (1) and right (4) buttons located beneath the touchpad to

perform selection and execution functions. These two buttons are similar
to the left and right buttons on a mouse. Tapping on the touchpad is the
same as clicking the left button.

• Use the 4-way scroll (3) button to scroll up or down and move left or right

a page. This button mimics your cursor pressing on the right scroll bar of
Windows applications.

English

Function Left button (1)

Execute Quickly click

twice.

Select Click once. Tap once.

Right
button (4)

Main touchpad (2)

Tap twice (at the same
speed as double-clicking
a mouse button).

Center
button (3)

9

English

Function Left button (1)

Drag Click and hold,

then use
finger on the
touchpad to
drag the
cursor.

Access
context
menu

Scroll Click and

Note: When using the touchpad, keep it — and your fingers — dry
and clean. The touchpad is sensitive to finger movement; hence,
the lighter the touch, the better the response. Tapping harder will
not increase the touchpad's responsiveness.

Right
button (4)

Click
once.

Main touchpad (2)

Tap twice (at the same
speed as double-clicking
a mouse button); rest
your finger on the
touchpad on the second
tap and drag the cursor.

Center
button (3)

hold to
move up/
down/left/
right.

10

Using the keyboard

The keyboard has full-sized keys and an embedded numeric keypad, separate
cursor, lock, Windows, function and special keys.

Lock keys and embedded numeric keypad

The keyboard has three lock keys which you can toggle on and off.

Lock key Description
Caps Lock When Caps Lock is on, all alphabetic characters typed are

Num Lock
<Fn> + <F11>

Scroll Lock
<Fn> + <F12>

The embedded numeric keypad functions like a desktop numeric keypad. It is
indicated by small characters located on the upper right corner of the keycaps.
To simplify the keyboard legend, cursor-control key symbols are not printed on

the keys.

in uppercase.
When Num Lock is on, the embedded keypad is in numeric

mode. The keys function as a calculator (complete with the
arithmetic operators +, -, *, and /). Use this mode when you
need to do a lot of numeric data entry. A better solution
would be to connect an external keypad.

When Scroll Lock is on, the screen moves one line up or down
when you press the up or down arrow keys respectively.
Scroll Lock does not work with some applications.

English

Desired access Num Lock on Num Lock off
Number keys on

embedded keypad
Cursor-control keys

on embedded keypad
Main keyboard keys Hold <Fn> while typing

Type numbers in a normal
manner.

Hold <Shift> while using
cursor-control keys.

letters on embedded keypad.

Hold <Fn> while using
cursor-control keys.

Type the letters in a
normal manner.

English

11

Windows keys (only for certain models)

The keyboard has two keys that perform Windows-specific functions.

Key Description

Pressed alone, this key has the same effect as clicking on the

Windows
key

Windows Start button; it launches the Start menu.
It can also be used with other keys to provide a variety of
functions:

< > : Open or close the Start menu
< > + <D>: Display the desktop
< > + <E>: Open Windows Explore
< > + <F>: Search for a file or folder
< > + <G>: Cycle through Sidebar gadgets
< > + <L>: Lock your computer (if you are connected to a

network domain), or switch users (if you're not connected to a
network domain)

< > + <M>: Minimizes all windows
< > + <R>: Open the Run dialog box
< > + <T>: Cycle through programs on the taskbar
< > + <U>: Open Ease of Access Center
< > + <X>: Open Windows Mobility Center
< > + <BREAK>: Display the System Properties dialog box
< > + <SHIFT+M>: Restore minimized windows to the desktop
< > + <TAB>: Cycle through programs on the taskbar by using

Windows Flip 3-D
< > + <SPACEBAR>: Bring all gadgets to the front and select

Windows Sidebar
<CTRL> + < > + <F>: Search for computers (if you are on a

network)
<CTRL> + < > + <TAB>: Use the arrow keys to cycle through

programs on the taskbar by using Windows Flip 3-D

Application
key

Note: Depending on your edition of Windows Vista, some
shortcuts may not function as described.

This key has the same effect as clicking the right mouse button; it
opens the application's context menu.

12

Hotkeys (only for certain models)

The computer employs hotkeys or key combinations to access most of the
computer's controls like screen brightness and volume output.

To activate hotkeys, press and hold the <Fn> key before pressing the other key
in the hotkey combination.

Hotkey Icon Function Description
<Fn> + <F1> Hotkey help Displays help on hotkeys.

<Fn> + <F2> System

information

<Fn> + <F3> Power settings

<Fn> + <F4> Sleep Puts the computer in Sleep mode.

<Fn> + <F5> Display toggle Switches display output between the

<Fn> + <F6> Screen blank Turns the display screen backlight off

<Fn> + <F7> Touchpad

toggle

<Fn> + <F8> Speaker toggle Turns the speakers on and off.

• Starts System Property for

displaying system information.
(Windows only)

• Starts KDE's KInfoCenter for

displaying system information.
(Linux only)

• Starts Power Options for power

management. (Windows only)

• Starts KDE's Control Module for

power management. (Linux only)

display screen, external monitor (if
connected) and both.

to save power. Press any key to
return.

Turns the internal touchpad on and
off.

English

<Fn> + < >

<Fn> + < >

<Fn> + < >
<Fn> + < >

Brightness up Increases the screen brightness.

Brightness
down

Volume up Increases the sound volume.
Volume down Decreases the sound volume.

Decreases the screen brightness.

English

13

Special keys

You can locate the Euro symbol and the US dollar sign at the upper-center
and/or bottom-right of your keyboard.

The Euro symbol

1 Open a text editor or word processor.
2 Either press < > at the bottom-right of the keyboard, or hold <Alt Gr>

and then press the <5> key at the upper-center of the keyboard.

Note: Some fonts and software do not support the Euro symbol.

The US dollar sign

1 Open a text editor or word processor.
2 Either press < > at the bottom-right of the keyboard, or hold <Shift>

and then press the <4> key at the upper-center of the keyboard.

Note: This function varies according to the language settings.

14

Using your Linpus™ Linux

®

(only for certain models)

Network configuration

This guide will help you configure your LAN and wireless network settings to
enable you to connect to the Internet.

Setting up wireless network

1 Click the WIRELESS icon on your system tray.
2 Click WIRELESS LIST to show the list of available wireless access points.
3 Select the wireless access point you want to connect to and click CONNECT.
4 You are now connected.
*For a shortcut, right-click on the WIRELESS icon on your system tray and choose

WIRELESS LIST.

Using K3b

K3b is a CD / DVD burning application for Linux systems optimized for KDE. This
guide will show you how to burn data on a CD/DVD or how to create an Audio
CD with audio files in your computer.

English

Burning data on CD

1 Launch K3b.
2 Choose NEW DATA CD PROJECT.
3 Drag and drop the files you want to put on the CD.
4 Click BURN. A window will pop up.

Note: If you have not inserted a CD at this point, you will be
prompted to insert an empty (or blank) CD, and the BURN button
will be disabled. Insert a CD.

5 Click BURN to start the burning process.

*If there are no errors, you will see SUCCESS.
6 Click CLOSE.
7 Close K3b.

15

8 Choose DISCARD.

English

Note: To create an audio CD, choose NEW AUDIO CD PROJECT and
follow the same steps in Burning data on CD.

Language settings

To change the language setup of your computer, follow these steps:
1 Log out of your current session.
2 Choose END CURRENT SESSION.
3On the WELCOME page, click on LANGUAGE at the bottom left of your

screen.

4 Choose the language you want and click CHANGE LANGUAGE.

16

5 Enter your username and password.

6 You can choose to set the language as your default language, or just for

the current session.

English

17

Frequently asked questions

English

The following is a list of possible situations that may arise during the use of
your computer. Easy solutions are provided for each one.

I turned on the power, but the computer does not start or
boot up.

Look at the power indicator:

• If it is not lit, no power is being supplied to the computer. Check the

following:

• If you are using on the battery, it may be low and unable to power

the computer. Connect the AC adapter to recharge the battery pack.

• Make sure that the AC adapter is properly plugged into the computer

and to the power outlet.

• If it is lit, check the following:

• Is a non-bootable (non-system) disk in the external USB floppy drive?

Remove or replace it with a system disk and press <Ctrl> + <Alt> +
<Del> to restart the system.

Nothing appears on the screen.

The computer's power management system automatically blanks the screen to
save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, three things might be
the cause:

• The brightness level might be too low. Press <Fn> + < > (increase) to

adjust the brightness level.

• The display device might be set to an external monitor. Press the display

toggle hotkey <Fn> + <F5> to toggle the display back to the computer.

• If the Sleep indicator is lit, the computer is in Sleep mode. Press and release

the power button to resume.

No audio is heard from the computer.

Check the following:

• The volume may be muted. Look at the volume control (speaker) icon on

the taskbar. If it is crossed-out, click on the icon and deselect the Mute all
option.

• The volume level may be too low. Look at the volume control icon on the

taskbar. You can also use the volume control buttons to adjust the volume.
See "Hotkeys (only for certain models)" on page 12 for more detail.

18

• If headphones, earphones or external speakers are connected to the line-

out port on the computer, the internal speakers automatically turn off.

I want to eject the optical drive tray without turning on the
power.

There is a mechanical eject hole on the optical drive. Simply insert the tip of a
pen or paperclip into the hole and push to eject the tray.

The keyboard does not respond.

Try attaching an external keyboard to a USB port on the computer. If it works,
contact your dealer or an authorized service center as the internal keyboard
cable may be loose.

The printer does not work.

Check the following:

• Make sure that the printer is connected to a power outlet and that it is

turned on.

• Make sure that the printer cable is connected securely to the computer's

parallel port or a USB port and the corresponding port on the printer.

I want to restore my computer to its original settings without
recovery CDs. (only for certain models)

English

Note: If your system is the multilingual version, the operating
system and language you choose when you first turn on the
system will be the only option for future recovery operations.

This recovery process helps you restore the C: drive with the original software
content that is installed when you purchase your notebook. Follow the steps
below to rebuild your C: drive. (Your C: drive will be reformatted and all data
will be erased.) It is important to back up all data files before using this option.

Before performing a restore operation, please check the BIOS settings.

1 Check to see if Disk-to-disk recovery is enabled or not.
2 Make sure the D2D Recovery setting in Main is Enabled.
3 Exit the BIOS utility and save changes. The system will reboot.

Note: To activate the BIOS utility, press <F2> during POST.

English

19

To start the recovery process:
1 Restart the system.
2 While the eMachines logo is showing, press <Alt> + <F10> at the same time

to enter the recovery process.

3 Refer to the onscreen instructions to perform system recovery.

Important! This feature occupies 10 GB in a hidden partition on
your hard disk.

I want to restore my computer to its original settings using a
recovery disc. (only for certain models)

The Recovery disc will help you to restore the hard drive with the original
software content that was installed when you purchased your notebook. Follow
the steps below to rebuild your hard drive. Your drive will be reformatted and
all data will be erased. It is important to back up all data files before you use
this option.

1 Press the power button to turn the system on.
2 Press F2 during the Power-On Self-Test (when the eMachines logo is

displayed on screen after bootup) to enter BIOS Setup.
3 Select the Boot menu.
4 Refer to onscreen instructions to set the first device to any bootable optical

disc drive.
5 Insert the Recovery disc into the selected optical disc drive.
6Select Exit Saving Changes from the Exit menu or press F10.
7 Follow the onscreen instructions to complete the installation process.
8 Restart your computer. Linpus Linux installation will finish.

How do I upgrade to the latest version of Firefox?
(only for certain models)

1 Go to http://rpm.pbone.net/
2Type Firefox in the search bar
3 Look for Fedora 6 package

Note: There are multiple Firefox RPM packages you can choose from. For

example, to upgrade to Firefox 2.0.0.11, you can search for firefox-2.0.11-

1.fc8.remi.i386.rpm package and download.

4 After downloading, run rpm -Uvh firefox-2.0.0.11-1.fc6.remi.i386.rpm (in

Konsole).

You should have successfully upgraded your Firefox.

20

Battery pack

The computer uses a battery pack that gives you long use between
charges.

Battery pack characteristics

The battery pack has the following characteristics:

• Employs current battery technology standards.

• Delivers a battery-low warning.

The battery is recharged whenever you connect the computer to the
AC adapter. Your computer supports charge-in-use, enabling you to
recharge the battery while you continue to operate the computer.
However, recharging with the computer turned off results in a
significantly faster charge time.

The battery will come in handy when you travel or during a power
failure. It is advisable to have an extra fully charged battery pack
available as backup. Contact your dealer for details on ordering a spare
battery pack.

Maximizing the battery's life

Like all other batteries, your computer's battery will degrade over
time. This means that the battery's performance will diminish with
time and use. To maximize your battery's life, you are advised to
adhere to the recommendations set out below.

English

English

Conditioning a new battery pack

Before you use a battery pack for the first time, there is a
"conditioning" process that you should follow:

1 Insert the new battery without turning the computer on.
2 Connect the AC adapter and fully charge the battery.
3 Disconnect the AC adapter.
4 Turn on the computer and operate using battery power.
5 Fully deplete the battery until the battery-low warning appears.
6 Reconnect the AC adapter and fully charge the battery again.

21

Follow these steps again until the battery has been charged and
discharged three times.

English

Use this conditioning process for all new batteries, or if a battery hasn't
been used for a long time. If the computer is to be stored for more
than two weeks, you are advised to remove the battery pack from the
unit.

Warning: Do not expose battery packs to temperatures below 0°C
(32°F) or above 45°C (113°F). Extreme temperatures may adversely
affect the battery pack.

By following the battery conditioning process you condition your
battery to accept the maximum possible charge. Failure to follow this
procedure will prevent you from obtaining the maximum battery
charge, and will also shorten the effective lifespan of the battery.

In addition, the useful lifespan of the battery is adversely affected by
the following usage patterns:

• Using the computer on constant AC power with the battery

inserted. If you want to use constant AC power, you are advised to

remove the battery pack after it is fully charged.

• Not discharging and recharging the battery to its extremes, as

described above.

• Frequent use; the more you use the battery, the faster it will reach

the end of its effective life. A standard computer battery has a life

span of about 300 charges.

Installing and removing the battery pack

Important! Before removing the battery from the unit, connect
the AC adapter if you want to continue using your computer.
Otherwise, turn off the computer first.

To install a battery pack:
1 Align the battery with the open battery bay; make sure that the

end with the contacts will enter first, and that the top surface of

the battery is facing up.
2 Slide the battery into the battery bay and gently push until the

battery locks in place.

22

To remove a battery pack:
1 Slide the battery release latch to release the battery.
2 Pull the battery from the battery bay.

Charging the battery

To charge the battery, first make sure that it is correctly installed in the
battery bay. Plug the AC adapter into the computer, and connect to a
mains power outlet. You can continue to operate your computer on AC
power while your battery is charging. However, charging the battery
with the computer turned off results in a significantly faster charge
time.

Note: You are advised to charge the battery before retiring for
the day. Charging the battery overnight before traveling enables
you to start the next day with a fully charged battery.

Checking the battery level

The Windows power meter indicates the current battery level. Rest the
cursor over the battery/power icon on the taskbar to see the battery's
present charge level.

Optimising battery life

Optimizing battery life helps you get the most out of battery
operation, prolonging the charge/recharge cycle and improving
recharging efficiency. You are advised to follow the suggestions set
out below:

• Purchase an extra battery pack.

• Use AC power whenever possible, reserving battery for on-the-go
use.

• Store the battery pack in a cool, dry place. The recommended
temperature is 10°C (50°F) to 30°C (86°F). Higher temperatures
cause the battery to self-discharge faster.

• Excessive recharging decreases the battery life.

• Look after your AC adapter and battery.

English

English

23

Battery-low warning

When using battery power pay attention to the power meter.

English

Warning: Connect the AC adapter as soon as possible after the
battery-low warning appears. Data will be lost if the battery to
become fully depleted and the computer shuts down.

When the battery-low warning appears, the recommended course of
action depends on your situation:

Situation Recommended Action

The AC adapter
and a power
outlet are
available.

An extra fully
charged battery
pack is available.

The AC adapter or
a power outlet is
unavailable. You
have no spare
battery pack.

1. Plug the AC adapter into the computer, and then
connect to the mains power supply.

2. Save all necessary files.

3. Resume work.

Turn off the computer if you want to recharge the
battery rapidly.

1. Save all necessary files.

2. Close all applications.

3. Shut down the operating system to turn off the
computer.

4. Replace the battery pack.

5. Turn on the computer and resume work.

1. Save all necessary files.

2. Close all applications.

3. Shut down the operating system to turn off the
computer.

24

Taking your notebook PC with you

This section gives you tips and hints to consider when moving around or
traveling with your computer.

Disconnecting from the desktop

Follow these steps to disconnect your computer from external accessories:

1 Save any open files.
2 Remove any media, floppy disks or compact disks from the drive(s).
3 Shut down the computer.
4 Close the display cover.
5 Disconnect the cord from the AC adapter.
6 Disconnect the keyboard, pointing device, printer, external monitor and

other external devices.

7 Disconnect the Kensington lock if you are using one to secure the

computer.

Moving around

When you are just moving within short distances, for example, from your office
desk to a meeting room.

English

Preparing the computer

Before moving the computer, close and latch the display cover to place it in
Sleep mode. You can now safely take the computer anywhere you go within
the building. To bring the computer out of Sleep mode, open the display; then
press and release the power button.

If you are taking the computer to a client's office or a different building, you
may choose to shut down the computer:

Click on Start then click on Shut down. (only for certain models).

Click on K Menu , choose Log Out, then click Turn Off Computer.
(only for certain models) Or:

You can put the computer in Sleep mode by pressing <Fn> + <F4>. Then close
and latch the display.

When you are ready to use the computer again, unlatch and open the display;
then press and release the power button.

English

25

Note: If the Sleep indicator is off, the computer has entered
Hibernation mode and is turned off. If the power indicator is off
but the Sleep indicator is on, the computer has entered Sleep
mode. In both cases, press and release the power button to turn
the computer back on. Note that the computer may enter
Hibernation mode after being in Sleep mode for a period of time.

What to bring to meetings

If your meeting is relatively short, you probably do not need to bring anything
with you other than your computer. If your meeting will be longer, or if your
battery is not fully charged, you may want to bring the AC adapter with you to
plug in your computer in the meeting room.

If the meeting room does not have an electrical outlet, reduce the drain on the
battery by putting the computer in Sleep mode. Press <Fn> + <F4> or close the
display cover whenever you are not actively using the computer. To resume,
open the display (if closed), then press and release the power button.

Taking the computer home

When you are moving from your office to your home or vice versa.

Preparing the computer

After disconnecting the computer from your desktop, follow these steps to
prepare the computer for the trip home:

• Check that you have removed all media and compact disks from the

drive(s). Failure to remove the media can damage the drive head.

• Pack the computer in a protective case that can prevent the computer from

sliding around and cushion it if it should fall.

Caution: Avoid packing items next to the top cover of the
computer. Pressure against the top cover can damage the screen.

What to take with you

Unless you have some items at home, take the following items with you:

• AC adapter and power cord

• The printed User's Guide

26

Special considerations

Follow these guidelines to protect your computer while traveling to and
from work:

• Minimize the effects of temperature changes by keeping the computer

with you.

• If you need to stop for an extended period of time and cannot carry the

computer with you, leave the computer in the trunk of the car to avoid
exposing the computer to excessive heat.

• Changes in temperature and humidity can cause condensation. Allow the

computer to return to room temperature, and inspect the screen for
condensation before turning on the computer. If the temperature change
is greater than 10 °C (18 °F), allow the computer to come to room
temperature slowly. If possible, leave the computer for 30 minutes in an
environment with a temperature between outside and room temperature.

Setting up a home office

If you frequently work on your computer at home, you may want to purchase a
second AC adapter for use at home. With a second AC adapter, you can avoid
carrying the extra weight to and from home.

If you use your computer at home for significant periods of time, you might also
want to add an external keyboard, monitor or mouse.

Traveling with the computer

English

When you are moving within a larger distance, for instance, from your office
building to a client's office building or traveling locally.

Preparing the computer

Prepare the computer as if you were taking it home. Make sure that the battery
in the computer is charged. Airport security may require you to turn on your
computer when carrying it into the gate area.

What to take with you

Take the following items with you:

• AC adapter

• Spare, fully-charged battery pack(s)

• Additional printer driver files if you plan to use another printer

English

27

Special considerations

In addition to the guidelines for taking the computer home, follow these
guidelines to protect your computer while traveling:

• Always take the computer as carry-on luggage.

• If possible, have the computer inspected by hand. Airport security X-ray

machines are safe, but do not put the computer through a metal detector.

• Avoid exposing floppy disks to hand-held metal detectors.

Traveling internationally with the computer

When you are moving from country to country.

Preparing the computer

Prepare the computer as you would normally prepare it for traveling.

What to bring with you

Bring the following items with you:

• AC adapter

• Power cords that are appropriate for the country to which you

are traveling

• Spare, fully-charged battery packs

• Additional printer driver files if you plan to use another printer

• Proof of purchase, in case you need to show it to customs officials

• International Travelers Warranty passport

Special considerations

Follow the same special considerations as when traveling with the computer. In
addition, these tips are useful when traveling internationally:

• When traveling in another country, check that the local AC voltage and the

AC adapter power cord specifications are compatible. If not, purchase a
power cord that is compatible with the local AC voltage. Do not use
converter kits sold for appliances to power the computer.

• If you are using the modem, check if the modem and connector is

compatible with the telecommunications system of the country you are
traveling in.

28

Securing your computer

Your computer is a valuable investment that you need to take care of. Learn
how to protect and take care of your computer.

Security features include hardware and software locks — a security notch
and passwords.

Using a computer security lock

The notebook comes with a Kensington-compatible security slot for a security
lock.

Wrap a computer security lock cable around an immovable object such as a
table or handle of a locked drawer. Insert the lock into the notch and turn the
key to secure the lock. Some keyless models are also available.

Using passwords

Passwords protect your computer from unauthorized access. Setting these
passwords creates several different levels of protection for your computer
and data:

• Supervisor Password prevents unauthorized entry into the BIOS utility.

Once set, you must enter this password to gain access to the BIOS utility.
See "BIOS utility" on page 32.

• User Password secures your computer against unauthorized use. Combine

the use of this password with password checkpoints on boot-up and
resume from Hibernation for maximum security.

• Password on Boot secures your computer against unauthorized use.

Combine the use of this password with password checkpoints on boot-up
and resume from Hibernation for maximum security.

English

Important! Do not forget your Supervisor Password! If you forget
your password, please get in touch with your dealer or an
authorized service center.

English

29

Entering passwords

When a password is set, a password prompt appears in the center of the
display screen.

• When the Supervisor Password is set, a prompt appears when you press

<F2> to enter the BIOS utility at boot-up.

• Type the Supervisor Password and press <Enter> to access the BIOS utility.

If you enter the password incorrectly, a warning message appears. Try
again and press <Enter>.

• When the User Password is set and the password on boot parameter is

enabled, a prompt appears at boot-up.

• Type the User Password and press <Enter> to use the computer. If you

enter the password incorrectly, a warning message appears. Try again and
press <Enter>.

Important! You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.

Setting passwords

You can set passwords using the BIOS utility.

30

Expanding through options

Your notebook PC offers you a complete mobile computing experience.

Connectivity options

Ports allow you to connect peripheral devices to your computer as you would
with a desktop PC. For instructions on how to connect different external devices
to the computer, read the following section.

Built-in network feature

English

The built-in network feature allows you to connect your computer to an
Ethernet-based network.

To use the network feature, connect an Ethernet cable from the Ethernet
(RJ-45) port on the chassis of the computer to a network jack or hub on
your network.

English

31

Universal Serial Bus (USB)

The USB 2.0 port is a high-speed serial bus which allows you to connect USB
peripherals without taking up precious system resources.

Installing memory

Follow these steps to install memory:

1 Turn off the computer, unplug the AC adapter (if connected) and remove

the battery pack. Then turn the computer over to access its base.

2 Remove the screws from the memory cover; then lift up and remove the

memory cover.

3 (a) Insert the memory module

diagonally into the slot, then
(b) gently press it down until it
clicks into place.

4 Replace the memory cover and

secure it with the screw.

5 Reinstall the battery pack, and

reconnect the AC adapter.

6 Turn on the computer.

The computer automatically detects
and reconfigures the total memory
size. Please consult a qualified technician or contact your local eMachines
dealer.

32

BIOS utility

The BIOS utility is a hardware configuration program built into your
computer's BIOS.

Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run it.

To activate the BIOS utility, press <F2> during the POST; while the notebook PC
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.

Enable disk-to-disk recovery
(only for certain models)

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select Main from the categories listed at the top of the screen. Find D2D
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this
value to Enabled.

Password

English

To set a password on boot, activate the BIOS utility, then select Security from
the categories listed at the top of the screen. Find Password on boot: and use
the <F5> and <F6> keys to enable this feature.

33

Playing DVD movies (only for certain models)

English

When the DVD drive module is installed in the optical drive bay, you can play
DVD movies on your computer.

1 Eject the DVD disk.

Important! When you launch the DVD player for the first time, the
program asks you to enter the region code. DVD disks are divided
into 6 regions. Once your DVD drive is set to a region code, it will
play DVD disks of that region only. You can set the region code a
maximum of five times (including the first time), after which the
last region code set will remain permanent. Recovering your hard
disk does not reset the number of times the region code has been
set. Refer to the table below for DVD movie region code
information.

2 The DVD movie will automatically play after a few seconds.

Region code Country or region
1 USA, Canada
2 Europe, Middle East, South Africa, Japan
3 Southeast Asia, Taiwan, South Korea
4 Latin America, Australia, New Zealand
5 Former USSR, parts of Africa, India
6 People's Republic of China

Note: To change the region code, insert a DVD movie of a
different region into the DVD drive. Please refer to the online
help for more information.

34

Troubleshooting

This chapter shows you how to deal with common system problems.
Read it before calling a technician if a problem occurs. Solutions to more
serious problems require opening up the computer. Do not attempt to open
the computer yourself; contact your dealer or authorized service center
for assistance.

Troubleshooting tips

This notebook PC incorporates an advanced design that delivers onscreen error
message reports to help you solve problems. If the system reports an error
message or an error symptom occurs, see "Error messages" below. If the
problem cannot be resolved, contact your dealer. See "You should have
successfully upgraded your Firefox." on page 19.

Error messages

If you receive an error message, note the message and take the corrective
action. The following table lists the error messages in alphabetical order
together with the recommended course of action.

Error messages Corrective action

CMOS battery bad Contact your dealer or an authorized service center.

CMOS checksum error Contact your dealer or an authorized service center.

Disk boot failure Insert a system (bootable) disk into the floppy drive (A:),

Equipment configuration
error

Hard disk 0 error Contact your dealer or an authorized service center.

Hard disk 0 extended type
error

I/O parity error Contact your dealer or an authorized service center.

Keyboard error or no
keyboard connected

Keyboard interface error Contact your dealer or an authorized service center.

Memory size mismatch Press <F2> (during POST) to enter the BIOS utility, then press

then press <Enter> to reboot.

Press <F2> (during POST) to enter the BIOS utility, then press
Exit in the BIOS utility to reboot.

Contact your dealer or an authorized service center.

Contact your dealer or an authorized service center.

Exit in the BIOS utility to reboot.

English

English

If you still encounter problems after going through the corrective measures,
please contact your dealer or an authorized service center for assistance. Some
problems may be solved using the BIOS utility.

35

Regulations and safety notices

English

FCC notice

This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.

Caution

Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this computer.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,

36

and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.

Declaration of Conformity for EU countries

Hereby, Acer, declares that this notebook PC series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
(Please visit http://global.acer.com/products/notebook/reg-nb/index.htm
complete documents.)

Compliant with Russian regulatory certification

for

Modem notices

English

English

Notice for USA

This equipment complies with Part 68 of the FCC rules. Located on the modem is
a label that contains, among other information, the FCC Registration Number
and Ringer Equivalence Number (REN) for this equipment. Upon request, you
must provide this information to your telephone company.

If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But, if advance notice is not practical, you will be
notified as soon as possible. You will also be informed of your right to file a
complaint with the FCC.

English

37

Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.

If this equipment should fail to operate properly, disconnect the equipment
from the phone line to determine if it is causing the problem. If the problem is
with the equipment, discontinue use and contact your dealer or vendor.

Caution: To reduce the risk of fire, use only No. 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord.

TBR 21

This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for
single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of
successful operation on every PSTN termination point. In the event of problems,
you should contact your equipment supplier in the first instance.

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

Notice for Australia

For safety reasons, only connect headsets with a telecommunications
compliance label. This includes customer equipment previously labelled
permitted or certified.

38

Notice for New Zealand

1 The grant of a Telepermit for any item of terminal equipment indicates

only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty. Above
all, it provides no assurance that any item will work correctly in all respects
with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of
Telecom's network services.

2 This equipment is not capable, under all operating conditions, of correct

operation at the higher speeds for which it is designed. Telecom will accept
no responsibility should difficulties arise in such circumstances.

3 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specifications:

a There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and

b The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the
next call attempt.

4 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. In order to operate within the limits for compliance with Telecom's
specifications, the associated equipment shall be set to ensure that
automatic calls to different numbers are spaced such that there is not less
than 5 seconds between the end of one call attempt and the beginning
of another.

5 This equipment shall not be set up to make automatic calls to Telecom's

111 Emergency Service.

6 This device is equipped with pulse dialing while the Telecom standard is

DTMF tone dialing. There is no guarantee that Telecom lines will always
continue to support pulse dialing.

7 Use of pulse dialing, when this equipment is connected to the same line as

other equipment, may give rise to bell tinkle or noise and may also cause a
false answer condition. Should such problems occur, the user should NOT
contact the telecom Fault Service.

8 This equipment may not provide for the effective hand-over of a call to

another device connected to the same line.

9 Under power failure conditions this appliance may not operate. Please

ensure that a separate telephone, not dependent on local power, is
available for emergency use.

English

English

English

39

Laser compliance statement

The CD or DVD drive used with this computer is a laser product.
The CD or DVD drive's classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE
TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE
A LOS RAYOS.

ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA
SÅTEESEENSTIRRA EJ IN I STRÅLEN

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I
STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or
red dots. This has no effect on the recorded image and does not constitute
a malfunction.

Macrovision copyright protection notice

"U.S Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132."
This product incorporates copyright protection technology that is protected by

U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.

40

Radio device regulatory notice

Note: Below regulatory information is for models with wireless
LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). Below information is for products
with such devices.

European Union (EU)

R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:

• Article 3.1(a) Health and Safety

-.EN60950-1:2001+ A11:2004

-.EN50371:2002

-.EN50360:2001

• Article 3.1(b) EMC

-.EN301 489-1 V1.4.1

-.EN301 489-3 V1.4.1

-.EN301 489-7 V1.2.1 (Applied to product with GSM function)

-.EN301 489-17 V1.2.1

-.EN301 489-24 V1.2.1 (Applied to product with GSM function)

• Article 3.2 Spectrum Usages

-.EN300 220-3 V1.1.1
(Applied to product with 27MHz wireless mouse/keyboard)

-.EN300 328 V1.6.1

-.EN300 440-2 V1.1.2

-.EN301 551-7 V9.0.2 (Applied to product with GSM function)

-.EN301 893 V1.2.3

-.EN301 908-1 V2.2.1 (Applied to product with GSM function)

-.EN301 908-2 V2.2.1
(Applied to product with GSM function)

English

English

English

41

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

The FCC RF safety requirement

The radiated output power of the wireless LAN Mini PCI Card and Bluetooth
card is far below the FCC radio frequency exposure limits. Nevertheless, the
notebook PC series shall be used in such a manner that the potential for human
contact during normal operation is minimized as follows:

1 Users are requested to follow the RF safety instructions on wireless option

devices that are included in the user's manual of each RF option device.

Caution: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 20 cm (8 inches)
must be maintained between the antenna for the integrated
wireless LAN Mini PCI Card built in to the screen section and all
persons.

Note: The eMachines wireless Mini PCI adapter implements a
transmission diversity function. The function does not emit radio
frequencies simultaneously from both antennas. One of the
antennas is selected automatically or manually (by users) to ensure
good quality radiocommunication.

42

2 This device is restricted to indoor use due to its operation in the 5.15 to

5.25 GHz frequency range. FCC requires this product to be used indoors for
the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.

3 High power radar are allocated as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device.

4 An improper installation or unauthorized use may cause harmful

interference to radio communications. Also any tampering of the internal
antenna will void the FCC certification and your warranty.

Canada — Low-power license-exempt radio
communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference
that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.

c Operation in 5 GHz band

• The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel Mobile Satellite systems.

• High power radars are allocated as primary users (meaning they have
priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could
cause interference and/or damage to LELAN (Licence-Exempt Local Area
Network) devices.

English

English

43

LCD panel ergonomic specifications

English

Design viewing distance 500 mm
Design inclination angle 0.0°
Design azimuth angle 90.0°
Viewing direction range class Class IV
Screen tilt angle 85.0°
Design screen illuminance • Illuminance level:

α)] lx where α = 85°

• Color: Source D65

Reflection class of LCD panel
(positive and negative polarity)

Image polarity Both
Reference white:

Pre-setting of luminance and
color temperature @ 6500K
(tested under BM7)

Pixel fault class Class II

• Ordinary LCD: Class I

• Protective LCD: Class III

• Yn

• u'n

• v'n

[250 + (250cos

44

Index

A

AC adapter

caring for xv

audio

troubleshooting 17

B

battery pack

battery-low warning 23
caring for xvi
characteristics 20
charging 22
checking charge level 22
installing 21
low conditions 23
maximizing life 20
optimizing 22
removing 22
using the first time 20

BIOS utility 32
brightness

hotkeys 12

C

caps lock 10

on indicator 2

care

AC adapter xv
battery pack xvi
computer xv

CD-ROM

ejecting manually 18
troubleshooting 18

charging

checking level 22

cleaning

computer xvi

computer

caring for xv
cleaning xvi
disconnecting 24
features 1
keyboards 10
moving around 24
on indicator 2
security 28

setting up a home office 26
taking home 25
traveling internationally 27
traveling on local trips 26
troubleshooting 34
turning off xv

connections

network 30

D

display

hotkeys 12

troubleshooting 17
DVD 33
DVD movies

playing 33

E

error messages 34
Euro 13

F

FAQ. See frequently-asked questions
frequently-asked questions 17
front view 3

H

Hibernation mode

hotkey 12
hotkeys 12

K

keyboard 10

embedded numeric keypad 10

hotkeys 12

lock keys 10

troubleshooting 18

Windows keys 11

L

left view 3

M

media access

on indicator 2
memory

installing 31
messages

error 34

English

45

English

N

network 30
num lock 10

on indicator 2

numeric keypad

embedded 10

P

password 28

types 28
ports 30
printer

troubleshooting 18
problems 17

CD-ROM 18

display 17

keyboard 18

printer 18

startup 17

troubleshooting 34

S

safety

CD or DVD 39

modem notices 36
scroll lock 10
security

keylock 28

passwords 28

speakers

hotkey 12
troubleshooting 17

T

touchpad 8

hotkey 12
using 8– 9

travel

international flights 27
local trips 26

troubleshooting 34

tips 34

U

universal serial bus 31

V

view

front 3
left 3
rear 4
right 4

W

Windows keys 11