eMachines E15T3, E15T, E17T Owner's Manual
Table of Contents
1. Caution and Warning
1. Caution and Warning.............................................................................................................. 2
2. FCC Requirements................................................................................................................. 3
3. Product Safety Precautions.................................................................................................... 4
4. Introduction .............................................................................................................................. 5
5. Hardware Installation ..............................................................................................................6
5-1. Unpacking........................................................................................................................6
5-2. Installation......................................................................................................................... 6
5-3. Video Input Pin Assignment............................................................................................ 8
6. Display Timing.........................................................................................................................9
6-1. Applicable Video Timing.................................................................................................. 9
7. Display Controls .................................................................................................................... 11
7-1. Display Controls............................................................................................................. 11
7-2. Screen Adjustment Operation Procedure ................................................................... 12
8. Screen Adjustment................................................................................................................13
8-1. Main Menu.....................................................................................................................13
8-2. OSD Adjusting and Controls.........................................................................................14
8-3. How to use AUTO TUNE Adjustment .........................................................................17
9. Troubleshooting Tips ............................................................................................................ 18
10. Specification ........................................................................................................................19
11. Appendix..............................................................................................................................20
CAUTION !!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
To reduce the risk of electric shock, do not
remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified personnel
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR
TO RAIN OR MOISTURE.
HIGH VOLTAGE EXISTS ON THE BACK LIGHT POWER LEAD OF THIS
MONITOR. BEFORE SERVICING, DETERMINE THE PRESENCE OF HIGH
VOLTAGE BY CONNECTING THE H.V. METER BETWEEN THE BACK LIGHT
POWER LEAD AND CHASSIS ONLY.
1 ENGLISH
2 ENGLISH
2. FCC Requirements
3. Product Safety Precautions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.“
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
strict accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measure:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnected cables and shield power cords must be employed with this
equipment to insure compliance with the pertinent RFD emission limits governing this
device.
Changes or modifications no expressly approved by the manufacturer could void the user
authority to operate the equipment.
Notice of Compliance with Canadian Interference-causing Equipment Regulations
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences du Reglemènt sur le
matériel brouilleur du Canada.
•
Follow all warnings and instructions marked on the product.
• Do not use this product near water.
• This display should be installed on a solid horizontal base.
When cleaning, use only a neutral detergent cleaner with a soft damp cloth. Do not spray with liquid or
aerosol cleaners.
Do not expose this display to direct sunlight or heat. Hot air may cause damage to the cabinet and
other parts.
Adequate ventilation must be maintained to ensure reliable and continued operation and to protect the
display from overheating. Do not block ventilation slots and openings with objects or install the display
in a place where ventilation may be hindered.
This display should be operated from the type of power source indicated on the AC/DC adapter.
Do not install this display near a motor or transformer where strong magnetism is generated. Images
on the display will become distorted and the color irregular.
Do not allow metal pieces or objects of any kind fall into the display from ventilation holes.
Do not attempt to service this unit yourself. Removal of the display cover may expose you to
dangerous voltage or other risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel in the event
that:
• Liquid is spilled into the product or the product is exposed to rain or water.
• The product does not operate normally when the operating instructions are followed.
• The product has been dropped or the cabinet has been damaged.
• The product exhibits a distinct change in performance, indicating a need for service.
• Power cord or plug is damaged or frayed.
3 ENGLISH
4 ENGLISH
4. Introduction
5. Hardware Installation
Thank you for purchasing an eMachines LCD monitor. We’re sure that you’ll be
pleased with the outstanding quality, reliability and performance of your new LCD
monitor. The following are some of the major advantages of your new eMachines LCD
monitor.:
• An LCD monitor has low radiation and less flicker than compared to traditional CRT
monitor.
• Your LCD monitor weights only 7.55 lbs (3.42 Kgs), and its compact size requires only
minimal desktop space. This means that your LCD monitor is easy to transport and
can be used on the most cluttered of desktops. Note: always protect the LCD glass
screen when transporting. Please save the original packaging for transporting longer
distances or for shipping.
• Your LCD monitor operates on low power consumption level … this translates into
savings on power bills and of the Earth’s resources.
• The special design of the LCD cabinet is both ergonomic and attractive … it fits in with
any decor.
• Using an LCD monitor is the same as the CRT monitor. There is no need to change
the hardware of your computer, just plug it in and go. Please see section 5. Hardware
Installation on page 6 for full details.
This chapter will guide you thru the correct installation procedures of your LCD monitor.
5-1. Unpacking
After you unpack your LCD Monitor, please make sure that the following items are included
in the carton and in good condition. If you find that any of these items are damaged or
missing, please contact your dealer immediately.
• One LCD Monitor mounted on its stand with video cable
• AC/DC adapter with 12V DC output
• AC power cord
• The User’s Manual
• Warranty Card
5-2. Installation
This analog LCD display does not require any special drivers. Necessary drivers are
supplied by the video card manufacturer and may be found on the diskettes supplied with
the video card that came with your computer. Windows XP / ME / 2000 drivers for both the
display and the video card are supplied on the Windows XP / ME / 2000 CD or diskettes.
Unfortunately, Microsoft does not provide a complete listing of the display manufacturers in
the operating system. You may use the standard XGA (1024X768@60) as the display type
when asked by the operating system. The video card must also be set up correctly in
Windows XP / ME / 2000 and make sure the video output of the VGA card is on the list in
Section 6.1 or check your Video Card manual or Windows XP / ME / 2000. Please see the
Windows read me file for further information on Video Card settings. You are now ready to
connect your new LCD Monitor to your computer.
5 ENGLISH
6 ENGLISH
5. Hardware Installation
A
p
B
k
Follow these simple steps to setup your LCD monitor
1.
Turn power off to both Computer and Display before making any connection.
2. Disconnect any existing monitor you may have from your Computer. Please refer to
your existing monitor’s User’s Guide.
3. Install the Display on a solid horizontal surface such as a table or a desk.
4. Connect the power cable and the AC/DC adapter and then connect the AC Adapter to
the DC jack that is located at the end of the signal cable.
IBM PC’s & Compatibles
5a. Connect one end of the signal cable to the matching 15-pin connector on the rear of
the computer.
Apple / Macintosh Computers
5b. Connect a MAC adapter (not supplied) to the video connector on the rear of the
Apple / Macintosh computer. Then plug the other end of the signal cable into the
MAC adapter. (Contact your local Apple dealer for information on purchasing the
correct conversion connector.)
6. Tighten the screws of the Display cable until the connectors are fastened securely.
7. Switch on power to the computer, then to the Display.
in D-SU
15
DC Jac
Power Cord
Figure 5.1 LCD Monitor Hardware Setup
C/DC Adapter
5. Hardware Installation
5-3. Video Input Pin Assignment
This section describes the pin assignment of the LCD’s video connector. It is called a
15-Pin Mini D-sub Connector.
Pin No. Signal Connector
1 Red Video Signal
2 Green Video Signal
3 Blue Video Signal
4 N.C.
5 Ground
6 Ground for red video signal
7 Ground for green video signal
8 Ground for blue video signal
9 +5V
10 Ground
11 N.C.
12 DDC data
13 Horizontal sync signal
14 Vertical sync signal
15 DDC clock
7 ENGLISH
8 ENGLISH
Loading...