eMachines 8513152 User Manual
Computer
Reference Guide
Contents
Chapter 1: About This Reference . . . . . . . . . . . 1
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Accessing the online User Guide . . . . . . . . . . . . . . . . . . . . . . . . . 2
eMachines contact information . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Microsoft Certificate of Authenticity . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 2: Checking Out Your Computer. . . . . 5
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 3: Setting Up and Getting Started . . 11
Working safely and comfortably . . . . . . . . . . . . . . . . . . . . . . . . 12
Reducing eye strain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting up your computer desk and chair . . . . . . . . . . . . . 13
Sitting at your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Avoiding discomfort and injury from repetitive strain . . 14
Preparing power connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Protecting from power source problems . . . . . . . . . . . . . 14
Checking the voltage selection . . . . . . . . . . . . . . . . . . . . . . 15
Connecting to a broadband modem or network . . . . . . . . . . 15
Connecting a dial-up modem . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Starting your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Waking up your computer . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turning off your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Restarting (rebooting) your computer . . . . . . . . . . . . . . . . . . . 19
Using the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using optical drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Loading an optical disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Identifying optical drive types . . . . . . . . . . . . . . . . . . . . . . . 23
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Creating discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the memory card reader . . . . . . . . . . . . . . . . . . . . . . . . . 26
i
Contents
Memory card types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Configuring the audio jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Installing a printer, scanner, or other device . . . . . . . . . . . . . 30
Chapter 4: Upgrading Your Computer. . . . . . . 31
Preventing static electricity discharge . . . . . . . . . . . . . . . . . . . 32
Opening the case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Removing the side panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Removing the front bezel . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Closing the case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Replacing the front bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Replacing the side panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Replacing the color panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Installing memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adding or replacing an optical disc drive . . . . . . . . . . . . . . . . 40
Replacing the media panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Adding or replacing a hard drive . . . . . . . . . . . . . . . . . . . . . . . 45
Replacing the heat sink and processor . . . . . . . . . . . . . . . . . . 47
Adding or replacing an expansion card . . . . . . . . . . . . . . . . . 50
Replacing the system battery . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Replacing the system board . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chapter 5: Maintaining Your Computer . . . . . 55
Setting up a maintenance schedule . . . . . . . . . . . . . . . . . . . . . 56
Caring for your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Cleaning your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cleaning the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Cleaning the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Cleaning the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Cleaning optical discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Updating Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Using BigFix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Managing hard drive space . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Checking hard drive space . . . . . . . . . . . . . . . . . . . . . . . . . . 62
ii
www.emachines.com
Deleting unnecessary files . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Checking the hard drive for errors . . . . . . . . . . . . . . . . . . . 63
Defragmenting the hard drive . . . . . . . . . . . . . . . . . . . . . . . 64
Backing up files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Scheduling maintenance tasks . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Moving from your old computer . . . . . . . . . . . . . . . . . . . . . . . .67
Transferring files and settings automatically . . . . . . . . . . 67
Transferring files and settings manually . . . . . . . . . . . . . . 68
Chapter 6: Troubleshooting . . . . . . . . . . . . . . . 71
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Try these steps first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Internet and networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Modem (cable or DSL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Modem (dial-up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Optical discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Memory card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Expansion cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Checking for device problems . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Recovering your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Recovering pre-installed software and drivers . . . . . . . . 93
Returning to a previous system condition . . . . . . . . . . . . 94
Returning your system to its factory condition . . . . . . . . 95
iii
Contents
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Before calling Customer Care . . . . . . . . . . . . . . . . . . . . . . . 98
Calling Customer Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Appendix A: Legal Notices . . . . . . . . . . . . . . . . 99
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
iv
Chapter 1
About This Reference
• About this guide
• Accessing the online User Guide
• eMachines contact information
• Microsoft Certificate of Authenticity
• For more information
1
Chapter 1: About This Reference
About this guide
This guide includes information and maintenance instructions
that are specific to your model of eMachines computer. Some
illustrations in this guide may look different than your
computer because hardware options and port locations may
vary. For all other computer information, see your online User
Guide.
For more information
For more information about your computer, visit the
eMachines Support page at www.emachines.com
address shown on your computer’s label. The Support page
also has links to additional eMachines documentation and
detailed specifications.
or the Web
Accessing the online User Guide
In addition to this guide, your User Guide has been included on
your hard drive. Your User Guide is an in-depth, easy-to-read
manual that includes information on the following topics:
• Help and technical support
• Using and customizing Windows and other software
• Controlling audio and video settings
• Using the Internet
• Protecting your files
• Playing and recording media
• Networking
To acce ss your User Guide:
• Click (Start), All Programs, then click eMachines
Documentation.
2
www.emachines.com
eMachines contact information
See your setup poster for Customer Care contact information.
The label on the top of your computer contains information
that identifies your computer model and serial number.
Customer Care will need this information if you call for
assistance.
Microsoft Certificate of Authenticity
The Microsoft Certificate of Authenticity label found on the
back or side of your computer includes the product key code
for your operating system. If you ever reinstall Windows from
the installation DVD, you will need to enter these numbers to
activate Windows.
3
Chapter 1: About This Reference
4
Chapter 2
Checking Out Your Computer
• Front
• Back
5
Front
DVD/CD drive
DVD/CD drive
(optional)
Memory card reader
(optional)
Power button/
power indicator
Chapter 2: Checking Out Your Computer
USB ports
Microphone jack
Headphone jack
6
www.emachines.com
Component Icon Description
Optical disc drive Use this drive to listen to audio CDs, install
Memory card
reader
Power
button/power
indicator
USB ports Plug USB (Universal Serial Bus) devices (such as
Microphone jack Plug a microphone into this jack. This jack is
Headphone jack Plug powered, analog front speakers, an
games and programs, watch DVDs, and store
large files onto recordable discs (depending on
drive type). This drive may be a CD, recordable
CD, DVD, recordable DVD, Blu-ray, or HD DVD
drive. For more information about your drive,
see “Identifying optical drive types” on
page 23.
Insert a memory card from a digital camera,
MP3 player, PDA, cellular telephone, or other
device into the memory card reader. For more
information, see “Using a memory card” on
page 27.
Press this button to turn the power on or off.
You can also configure the power button to
operate in Standby/Resume mode or
Hibernate mode. The power indicator lights
when the computer is turned on.
a USB external drive, printer, scanner, camera,
keyboard, or mouse) into these ports.
color-coded pink.
external amplifier, or headphones into this
jack. This jack is color-coded green.
7
Back
Chapter 2: Checking Out Your Computer
Important
Your computer’s hardware options and port locations may vary from this
illustration.
Power connector
Voltage switch
Case thumbscrew
PS/2 keyboard port
Serial port
Monitor (VGA) port
USB p orts
Microphone jack
Headphone/speaker jack
Telephone jack (optional)
PS/2 mouse port
Parallel port
Ethernet (network) jack
Audio in jack
Case cover thumbscrew
Modem (line) jack
(optional)
Component Icon Description
Power connector Plug the power cord into this connector.
Voltage switch The switch is preset at the factory. Make
PS/2 keyboard port Plug a PS/2 keyboard into this port.
Serial port Plug a serial device (such as a digital
sure that this i s set to the correct voltage for
your area. For more information, see
“Checking the voltage selection” on page 15
camera) into this port.
Monitor (VGA) port Plug a VGA (blue connector) monitor cable
USB ports Plug USB (Universal Serial Bus) devices
into this port.
(such as a USB printer, scanner, camera,
keyboard, or mouse) into these ports.
8
www.emachines.com
Component Icon Description
Microphone jack
(pink plug)
Headphone/ speaker
jack (green plug)
Telephone jack
(optional)
Case thumbscrew Remove this screw before opening the case.
PS/2 mouse port Plug a PS/2 mouse into this port.
Parallel port Plug a parallel device (such as a printer) into
Ethernet (network)
jack
Audio input (Line in)
jack (blue plug)
Modem jack
(optional)
Plug a microphone into this jack.
Plug headphones or speakers into this jack.
Plug the cord from your telephone into this
jack.
this port.
Plug an Ethernet network cable or a device
(such as a DSL or cable modem for a
broadband Internet connection) into this
jack. For more information, see “Learning
about the Internet” in the online User Guide
and “Connecting to a broadband modem or
network” on page 15.
Plug an external audio input source (such as
a stereo) into this jack so you can record
sound on your computer.
Plug a modem cable into this jack. For more
information, see “Connecting a dial-up
modem” on page 16.
9
Chapter 2: Checking Out Your Computer
10
Chapter 3
Setting Up and Getting
Started
• Working safely and comfortably
• Preparing power connections
• Connecting to a broadband modem
or network
• Connecting a dial-up modem
• Starting your computer
• Turning off your computer
• Restarting (rebooting) your
computer
• Using the keyboard
• Using the mouse
• Using optical drives
• Using the memory card reader
• Adjusting the volume
• Configuring the audio jacks
• Installing a printer, scanner, or other
device
11
Chapter 3: Setting Up and Getting Started
Working safely and comfortably
Before using your computer, follow these general guidelines
for setting up a safe and comfortable work area and avoiding
discomfort and strain:
• Keep hands and arms parallel to the floor.
• Adjust the screen so it is perpendicular to your line of
sight, and the top of the screen is no higher than eye
level.
• Place your feet flat on the floor or on a footrest.
• Keep ventilation openings clear of obstructions.
Hands and arms are
parallel to the floor
Top of screen is not
higher than eye level
Screen is perpendicular to
your line of sight
12
Feet are flat on the floor
www.emachines.com
Reducing eye strain
Sunlight or bright indoor lighting should not reflect on the
monitor screen or shine directly into your eyes.
• Position the computer desk and screen so you can avoid
glare on your screen and light shining directly into your
eyes. Reduce glare by installing shades or curtains on
windows, and by installing a glare screen filter.
• Use soft, indirect lighting in your work area. Do not use
your computer in a dark room.
• Set paper holders at the same height and distance as the
monitor.
• Avoid focusing your eyes on your computer screen for
long periods of time. Every 10 or 15 minutes, look around
the room, and try to focus on distant objects.
Setting up your computer desk and chair
When you are setting up your computer desk and chair, make
sure that the desk is the appropriate height and the chair helps
you maintain good posture.
• Select a flat surface for your computer desk.
• Adjust the height of the computer desk so your hands
and arms are positioned parallel to the floor when you
use the keyboard and touchpad. If the desk is not
adjustable or is too tall, consider using an adjustable
chair to control your arm’s height above the keyboard.
• Use an adjustable chair that is comfortable, distributes
your weight evenly, and keeps your body relaxed.
• Position your chair so the keyboard is at or slightly below
the level of your elbow. This position lets your shoulders
relax while you type.
• Adjust the chair height, adjust the forward tilt of the seat,
or use a footrest to distribute your weight evenly on the
chair and relieve pressure on the back of your thighs.
• Adjust the back of the chair so it supports the lower
curve of your spine. You can use a pillow or cushion to
provide extra back support.
13
Chapter 3: Setting Up and Getting Started
Sitting at your computer
• Avoid bending, arching, or angling your wrists. Make
sure that they are in a relaxed position when you type.
• Do not slouch fo rwa rd or l ean fa r b ack . S it wit h yo ur ba ck
straight so your knees, hips, and elbows form right
angles when you work.
• Take breaks to stand and stretch your legs.
• Avoid twisting your torso or neck.
Avoiding discomfort and injury from repetitive strain
• Vary your activities to avoid excessive repetition.
• Take breaks to change your position, stretch your
muscles, and relieve your eyes.
• Find ways to break up the work day, and schedule a
variety of tasks.
Preparing power connections
Protecting from power source problems
Warning
High voltages can enter your computer through both the power cord and
the modem connection. Protect your computer by using a surge protector. If you
have a telephone modem, use a surge protector that has a modem jack. If you
have a cable modem, use a surge protector that has an antenna/cableTV jack.
During an electrical storm, unplug both the surge protector and the modem.
During a power surge, the voltage level of electricity coming
into your computer can increase to far above normal levels and
cause data loss or system damage. Protect your computer and
peripheral devices by connecting them to a surge protector,
which absorbs voltage surges and prevents them from
reaching your computer.
An uninterruptible power supply (UPS) supplies battery power
to your computer during a power failure. Although you cannot
run your computer for an extended period of time with a UPS,
a UPS lets you run your computer long enough to save your
work and shut down your computer normally.
14
www.emachines.com
Checking the voltage selection
Caution
If you set the voltage selection switch incorrectly, your system will be
damaged. Make sure this switch is set correctly for your location before turning
on your computer. In the United States, the utility power is supplied at a nominal
115 volts at 60 Hz. The power supply should always be set to this when your
computer is operating in the United States. In other areas of the world, such as
Europe, the utility power is supplied at 230 volts at 50 Hz. If your computer is
operating in an environment such as this, the voltage switch should be moved
to 230.
The power supply, a component built into your computer,
provides power to the system board, add-in cards, and
peripheral devices. The power supply’s voltage selection for
your location is typically set at the factory, but you can change
it to match the electrical service available in your usage area
(such as while in another country). Use the power selection
switch on the back of your computer to set the voltage to 115V
or 230V.
To set the voltage selection switch:
1 Disconnect your computer’s power cable.
2 Use a tool such as an opened paper clip to slide the
voltage selection switch to the correct voltage position.
The switch is located on the back of your computer, near
the power cable connector.
Connecting to a broadband modem or network
Important
Your computer may be equipped with a built-in Ethernet (network) jack.
For information about setting up a wired or wireless Ethernet network, see your
online User Gu ide.
You can connect your computer to a cable or DSL modem or
to a wired Ethernet network.
To connect to a broadband modem or to an Ethernet
network:
1 Insert one end of the network cable into the network
jack on the back of your computer.
2 Insert the other end of the network cable into a cable
modem, DSL modem, or network jack.
15
Chapter 3: Setting Up and Getting Started
Connecting a dial-up modem
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Your computer may have a 56K modem that you can use with
a standard telephone line to connect to the Internet or fax
documents.
To connect the modem:
1 Insert one end of the modem cable into the modem
jack on the modem at the back of your computer.
2 Insert the other end of the modem cable into a telephone
wall jack. (The modem will not work with digital or PBX
telephone lines.)
3 If you want, you can connect a telephone to the PHONE
jack on the modem at the back of your computer.
Starting your computer
16
To start your computer:
1 Connect the power, network, mouse, and keyboard
cables to your computer according to the setup poster.
2 Press the power button on the front of your computer.
If your computer does not turn on, check the power cord
connections.
Important
Your computer has a built-in, variable-speed fan. In addition, your
computer uses a powerful processor which produces heat and has its
own cooling fan. Both the system fan and processor fan can run at
different speeds at times to ensure correct system cooling. You may
notice an increase in the fan noise when the fan is running at high speed
and a decrease in the fan noise when it switches to normal speed.
3 If you are starting your computer for the first time,
follow the on-screen instructions to select the language
and time zone and to create your first user account.
4 Attach and turn on any USB or audio peripheral devices,
such as printers, scanners, and speakers. If you need to
attach a peripheral device to the parallel or serial ports,
turn off your computer first. See the documentation that
came with each device for its setup instructions.
www.emachines.com
5 To open your computer’s Start menu, click (Start).
From that menu, you can run programs and search for
files. For more information on using your computer’s
menus, see “Using Windows” and “Customizing
Windows” in your online User Guide.
Waking up your computer
Tip
For more information about changing the power button mode, see the
“Customizing” chapter in your online User G uid e.
When you have not used your computer for several minutes,
it may enter a power-saving mode called Sleep. While in Sleep
mode, the power indicator on the power button flashes.
If your computer is in Sleep mode, move the mouse, press a
key on the keyboard, or press the power button to “wake” it up.
Turning off your computer
Warning
When you turn off your computer, certain components in the power
supply and system board remain energized. In order to remove all electrical
power from your computer, unplug the power cord and modem cable from the
wall outlets. We recommend disconnecting the power cord and modem cable
when your computer will not be used for long periods.
Important
If for some reason you cannot use the Shut Down option in Windows to
turn off your computer, press and hold the power button for about five seconds,
then release it.
Putting your computer into Sleep mode is the easiest way to
power down your computer. Although it does not turn your
computer completely off, it does turn off or slow down most
system operations to save power. It also saves your desktop
layout so the next time you restore power, the programs are
laid out just as you left them. Waking your computer from a
Sleep state is much faster than turning on your computer after
it has been turned completely off.
17
Chapter 3: Setting Up and Getting Started
To put your computer to sleep:
1 Click (Start), then click (power). The computer
saves your session and partially shuts down to save
power.
2 To “wake” your computer, press a key on the keyboard,
move the mouse, or press the power button.
To turn off your computer:
1 Click (Start), click the arrow next to the lock icon, then
click Shut Down. The computer turns off.
2 To completely disconnect all power (such as for servicing
internal components), also disconnect the power cord.
18
www.emachines.com
Restarting (rebooting) your computer
If your computer does not respond to keyboard or mouse
input, you may need to restart (reboot) your computer.
To restart your computer:
1 Click (Start), click the arrow next to the lock icon, then
click Restart. Your computer turns off, then turns on
again.
2 If your computer does not turn off, press and hold the
power button until the computer turns off (about five
seconds), then press it again to turn the computer back
on.
19
Chapter 3: Setting Up and Getting Started
Using the keyboard
The keyboard has several different types of keys and buttons.
Your keyboard also has status indicators that show which
keyboard feature is active.
Audio playback buttons
Function keys Indicators
Windows key
Windows key
Application key
Navigation keys
Numeric keypad
Feature Description
Function keys Press these keys to start program actions. Each program
Audio playback
buttons
Indicators Th ese turn on if yo ur N UM LOCK, CAPS LOCK, or SCROLL LOCK key
Windows keys Press one of these keys to open the Windows Start menu.
Application key Press this key to access shortcut menus and help assistants
Navigation keys Press these keys to move the cursor to the beginning of a
Numeric keypad Press these keys to type numbers when the numeric keypad
uses different function keys for different purposes. See the
program documentation to find out more about the
function key actions.
Press these buttons to play your audio files and adjust the
volume.
is activated. Press the corresponding key to activate.
These keys can also be used in combination with other keys
to open utilities like F (Find/Search), R (Run), and
E (Computer).
in Windows.
line, to the end of a line, up the page, down the page, to
the beginning of a document, or to the end of a document.
(NUM LOCK) is turned on.
20
www.emachines.com
Using the mouse
Right button
Left button
The mouse is a device that controls the pointer movement on
the computer display. This illustration shows the standard
mouse.
As you move the mouse, the pointer (arrow) on the display
moves in the same direction.
Scroll wheel
21
Chapter 3: Setting Up and Getting Started
You can use the left and right buttons on the mouse to select
objects on the display. You can use the scroll wheel on the
mouse to move through a document. This feature is not
available in all programs.
To... Do this...
Move the pointer
on the computer
display
Select an object
on the computer
display
Start a program
or open a file or
folder
Access a
shortcut menu
or find more
information
about an object
on the display.
Move an object
on the computer
display.
Move the mouse around. If you
reach the edge of your mouse
pad and need to move the
mouse farther, lift the mouse
and place it in the middle of the
mouse pad, then continue
moving the mouse.
Position the pointer over the
object. Quickly press and
release the left mouse button.
This is called clicking.
Position the pointer over the
object. Quickly press and
release the left mouse button
twice. This is called
double-clicking.
Position the pointer over the
object. Quickly press and
release the right mouse button
once. This is called
right-clicking.
Position the pointer over the
object. Press the left mouse
button and hold it down. Move
(drag) the object to the
appropriate part of the
computer display. Release the
button to drop the object where
you want it. This is called
clicking and dragging.
22
For more information about how to adjust the double-click
speed, pointer speed, right-hand or left-hand configuration,
and other mouse settings, see the “Customizing” chapter in
your online User Guide. For instructions on how to clean the
mouse, see “Cleaning the mouse” on page 59.
www.emachines.com
Using optical drives
Features
Your optical drive has the following basic components:
Flip-down door Eject buttonActivity indicator
Loading an optical disc
To insert an optical disc:
1 Press the eject button on the optical disc drive.
Important
When you place a single-sided disc in the tray, make sure that the
label side is facing up. If the disc has two playable sides, place the disc
so the name of the side you want to play is facing up.
2 Place the disc in the tray with the label facing up.
3 Press the eject button to close the tray.
Identifying optical drive types
Your computer may contain one of the following drive types.
Press the drive’s eject button, then look on the front of the
drive’s disc tray for one or more of the following logos:
If your optical drive has
this logo...
Your drive type
is...
CD
CD-RW
Use your drive for...
Installing programs, playing
audio CDs, and accessing data.
Installing programs, playing
audio CDs, accessing data, and
creating CDs.
23
Chapter 3: Setting Up and Getting Started
If your optical drive has
this logo...
Your drive type
is...
DVD/CD-RW
DVD
DVD+RW
DVD R/RW
Double layer
DVD+RW
Use your drive for...
Installing programs, playing
audio CDs, accessing data,
creating CDs, and playing DVDs.
Installing programs, playing
audio CDs, playing DVDs, and
accessing data.
Installing programs, playing
audio CDs, playing DVDs,
accessing data, and recording
video and data to CDs and
DVD+R or DVD+RW discs.
Installing programs, playing
audio CDs, playing DVDs,
accessing data, and recording
video and data to CDs and
DVD+R, DVD+RW, DVD-R, and
DVD-RW discs.
Installing programs, playing
audio CDs, playing DVDs,
accessing data, and recording
video and data to CDs and
double layer DVD+R discs.
Note: To use the double layer
capability of the double layer
recordable DVD drive, the blank
DVDs you purchase must state
Double Layer, Dual Layer, or DL.
Using other types of blank
media will result in less
capacity.
24
RECORDER
DVD-RAM/-RW
Blu-ray Disc
Installing programs, playing
audio CDs, playing DVDs,
accessing data, and recording
video and data to CDs and
DVD-RAM, DVD-R, or DVD-RW
discs.
Installing programs, playing
audio CDs, playing DVDs,
playing Blu-ray Discs, accessing
data, and recording video and
data to CDs, DVD-RAM, DVD-R,
DVD-RW, and Blu-ray discs.
Loading...