Elura R6.5LCRZ, R8LCRZ Owner's Manual & Installation Manual
Owner’s Manual / Installation Guide
Congratulations and thanks for your selection of the Elura Red Label Series speakers. These products have been
designed for easy installation and reliable performance. Because you’re a professional in this eld, we’ve limited
the following installation guidelines to essential facts and recommendations.
One thing to keep in mind: Elura is committed to your success. Any questions, comments or assistance you require
is available anytime by contacting us directly. Thanks for your support.
PRE-INSPECTION
Check the contents of each carton to make sure no damage has occurred during transit or handling. Let us know
immediately if anything appears to be damaged.
Contact your freight company or dealer and le a claim - all products leave our factories and distribution centers
completely clean and fully functional. Normally, we’ll replace damaged product immediately and await freight
claim results so you can get your job done. Please take photos (particularly shipping cartons) and send them along
with a description of the damage.
SELECTING SPEAKER LOCATIONS
Elura angle woofer speakers are designed as a powerful acoustic compliment to any home theater entertainment
center. They are most popular as rear channel surround speakers to complete a 5.1 or 7.1 system. However, they
can be used in variety of applications, including in-ceiling LCR installations (left/right/center) or as a stereo pairs for
special listening rooms.
Take your usual care when selecting speaker locations and placement. Avoid wiring, plumbing, lighting xtures
and HVAC ducting. Speaker wiring should already be in position for new construction – watch for studs and joists
when making your cut-outs.
SPECIAL FEATURES
The Red Label LCRZ in-ceiling speaker is designed with an 18 degree oset woofer for aiming toward the primary
listening area. Depending on room reectivity, the speaker frame may be turned any direction during installation
to accommodate your individual preference for low frequency bass response. The rotating bridge feature enables
you to rotate the high frequency drivers in the general direction of your listening area, independent of the woofer
position. In addition, both midrange and tweeter can be independently aimed for precision sound reproduction.
SPEAKER INSTALLATION
We package the Red Label Series with the grille on to prevent possible damage. You’ll nd the paint mask and
adhesive chips to attach the mask are packaged adjacent to the speakers. Position the dog ears ush with the
bae frame and hold next to your cut-out.
Connect the speaker wires (+ to + / - to -), install the speakers and connect to the amplier. For multiple speakers,
be sure to check impedance matching.
SOUND DISPERSION
Depending on room size it is best to place speakers approximately 12’ from one another. Proper spacing will
improve sound imaging. Consider the room environment and furniture placement while selecting your primary
listening area.
PAINT PROCEDURES
You may have your own painting methods but we recommend the speakers be painted in place using the paint
guard (included). Paint the grilles in a separate location (not installed on the speaker). First gently remove the
lightly glued Dacron, and take care to not clog the holes with paint. Carefully re-install Dacron and grilles for a
tight attractive nish. Install the grille ush with the bae edge on all sides and you’re set.
BASIC LEVEL CONTROL ADJUSTMENT
The Elura Red Label Series include individual woofer and tweeter SPL (volume) controls so you can adjust the
balance of low and high frequencies to best suit your individual listening area. We recommend setting the tweeter
levels rst and then match them with the desired bass level.
Regardless of how many speakers you are connecting to your amplier, we suggest using a lower bass SPL position
until you conrm your amplier can handle the additional power requirement.
HIGH FREQUENCY ADJUSTMENT
Since high frequencies are directional, the Red Label LCRZ speaker is equipped with adjustable, full (360 degree)
rotation tweeters. While taking care not to touch the speaker cones, rotate the tweeter toward the primary
listening area.
Once you have the tweeters positioned and speaker volume adjusted to your preference, replace the grille securely
so it is ush with the surrounding trim ring and enjoy.
PRODUCT WARRANTY
Elura speaker products are guaranteed to meet or exceed the specifications included in this manual and carry with
them a lifetime limited warranty under normal conditions of use. This warranty covers free parts and labor on all
components with the obligation that Elura will repair or replace any component found defective in materials or
workmanship. This warranty does not apply to products that have been abused, incorrectly installed, modified,
disassembled and/or repaired by anyone other than Elura or our appointed repair facility. Products qualified under
this warranty must be returned to the factory or a service center designated by Elura, with all transportation and
insurance charges pre-paid.
SPEAKER SPECIFICATIONS
R6.5LCRZ
Speaker Type: In-ceiling Angled, 3 way
Woofer: 6.5” Angled Polypropylene Injection Molded Cone Midrange: 1.5” Mylar, swivel
Tweeter: .75” Aluminum, swivel Power: 5-100 watts
Impedance: 6 ohms Freq. Response: 44-20K Hz
Sensitivity: 88dB Grille Type: Micromesh, Steel
Finish Dimensions: Ø9.27“ (235.5mm) 5.35” (135.9mm) Cutout Dimension: Ø8.3” (211mm)
R8LCRZ
Speaker Type: In-ceiling Angled, 3 way
Woofer: 8” Angled Polypropylene Injection Molded Cone Midrange: 2” Aluminum, swivel
Tweeter: 1” Aluminum, swivel Power: 5-150 watts
Impedance: 8 ohms Freq. Response: 45-20K Hz
Sensitivity: 90dB Grille Type: Micromesh, Steel
Finish Dimensions: Ø11.68“ (296.8mm) 6.44” (163.6mm) Cutout Dimension: Ø10.55” (268mm)
www.elura.audio
Loading...