ELUMEROS Colour Combat MP, Colour Combat Punch S5 User Manual

Colour Combat MP

USER MANUAL

User Manual version 1 | page 2
Elumeros.com | Specification subject to change without notice

Contents

User Manual version 1 | page
Elumeros.com | Specification subject to change without notice – product shown is quad chip variant

1) Introduction p3

2) Product overview p4

3) Mounting product p6

4) Electrical connections p7

5) RDM functionality
RGBW Fixtures p8
RGBL Fixtures p10
RGBA Fixtures P12
White Fixtures p13
Dynamic White Fixtures p13

6) Specifications
Colour Combat MP RGBW p14
Colour Combat MP Quad p15
Colour Combat MP White p16
Colour Combat MP Dynamic White p17

7) Dimensions p18

8) Trouble Shooting p19

9) Contact Details p20

User Manual version 1 | page 3
Elumeros.com | Specification subject to change without notice

Elumeros, sister company to EPS, is a leading architectural lighting manufacturer.
We deliver world-class lighting products, or as we prefer to say, progressive
solutions!

Our portfolio is an architectural lighting toolbox, furnishing you with everything you
need to create inspiring lighting installations, from floodlights and wall washers to
accent and spot lights, as well as GOBO projectors and video media products for
those specialised projects.

Designed from the ground up, our luminaires incorporate sophisticated, industry
leading technology, from the latest quad chip LEDs, to our renowned DMX and
RDM enabled integrated drivers, which work seamlessly with industry standard
DMX and RDM control systems.

Our passion for controls

Our passion lies with control systems and electronics. While many people
understand the benefits of controls they lack confidence in their purchases. Our
aim is to unravel the mystery of the controls world and make your decision easy,
informed and fun.

International knowledge

UK based, we work with an international network of partners and distributors. Our
in-house project team delivers internationally. Years of experience has built a sound
knowledge base helping us to understand the finite differences between standards
and applications across the globe. This allows us to support our network with
lighting design, controls, mechanical engineering and architectural planning, to the
highest standards.

Colour Combat® MP

Colour Combat® MP A high powered,
full colour luminaire suitable for both
floodlighting and wall washing – 14428
lumen output when using RGBL at
300W – High efficiency, 48.09 lm/W
when using RGBL, with high colour
quality – Single unit can used for RGB,
RGBW, RGBA, RGBL and Dynamic White

- When using RGBL variable white is
possible – Compatible with RDM/
DMX controls – Colour consistency
guaranteed through the
ElumerCheck System.

1. Introduction

Delivering Progressive Solutions

User Manual version 1 | page 4
Elumeros.com | Specification subject to change without notice

2. Product Overview

A high powered, full colour luminaire suitable for both
floodlighting and wall washing

- 14428 lumen output when using RGBL at 300W

- High efficiency, 48.09 lm/W when using RGBL, with high colour quality

- Single unit can used for RGB, RGBW, RGBA, RGBL and Dynamic White

- When using RGBL variable white is possible

- Compatible with RDM/DMX controls

- Colour consistency guaranteed through the ElumerCheck System

14°

20°

300W

IP66

14428
RGBL

11635
RGBA

12768

RGBW

11278
WARM
WHITE

11874

COOL

WHITE

OPTICS POWER

IP RATING

LUMENS

COLOUR COMBAT MP

DMX/RDM

RGBW

RGBW
(quad)

RGBL

(quad)

VARIOUS

CCTS

AVAILABLE

LED CHIP

TYPE

CONTROLS

DYNAMIC

WHITE

(1800

>5600K)

60°

30°

45°

3.6°

10°

10686

DYNAMIC

WHITE

User Manual version 1 | page 5
Elumeros.com | Specification subject to change without notice

This product left the place of manufacture in perfect condition.
In order to maintain this condition and for safe operation, the user must always

follow the instructions and safety warnings described in this user manual.

Safety Warning!

General

- This product must be installed by a qualified and competent professional.

- When working on the fixture, heat resistant gloves should be worn to provide
adequate user protection.

- Do not work on the product with wet hands.

- Always disconnect the power supply before attempting to maintain or service
the equipment.

- Always operate the equipment as described in this user manual.

- Do not stand close to the equipment and stare directly into the LED light source.

- Make sure that all parts of the equipment are kept clean and free of dust which
should be carried out as part of a maintenance cycle that’s appropriate for the
installation location of the product.

- When transferring the product, it is advisable to use the original packaging in
which the product left the factory.

- Shields, lenses, ultraviolet screens and pressure release valves should be
changed if they have become damaged to such an extent that their
effectiveness is impaired.

- The lamp (LED) should be changed if it has become damaged or thermally
deformed.

- The power supply (PSU), DMX/RDM driver and LED drivers should be changed if
they fail to operate.

Installation

- A minimum distance of 0.5m must be maintained between the equipment and
any combustible surface. The mounting surface must not be combustible.

- Always ensure the supporting structure is a flat and solid surface and can support
the weight of the product and any additional wind or shear force. The supporting
structure must be capable for the installation of luminaires, and advice must be
taken from an appropriately qualified and competent person to verify proposed
mounting positions and surfaces.

- Always make sure that the equipment is installed securely and ensure all safety
anchors are installed.

- The product must be installed within well-ventilated areas.

- The Earth wire MUST ALWAYS be connected.

- Local electrical and building regulations must be followed. If in doubt, please
contact Elumeros support.

- Avoid shaking or strong impacts to any part of the equipment.

- Always make sure that the power and data connections are connected correctly
and securely. If there is any malfunction of the equipment, contact Elumeros or
your local distributor immediately.

- This product comes with a pressure relief valve, which should be kept clean and
should not be submersed in water

- Although the product is IP66 rated, it should NOT be submersed in water, or
installed and/or operated in any location where any part of the fixture could be
submersed in water. Care should be taken to ensure adequate drainage of any
containment surrounding the fixture.

- This fixture should not be buried.

This user manual is intended to cover as
much detail as possible for this product,
and great care has been taken to ensure
this and the accuracy of the information
contained within, however should
additional information or clarification be
required that is not covered within this
manual or associated data sheets, or if
there are any uncertainties regarding
the installation and operation of this
product, Elumeros MUST be contacted
before any work is carried out on the
fixture or associated products.

FAILURE TO COMPLY WITH THIS
MANUAL AND LOCAL ELECTRICAL
AND CONSTRUCTION REGULATIONS
MAY RESULT IN SERIOUS INJURY OR
EVEN DEATH – ALWAYS ISOLATE
POWER BEFORE WORKING ON
ELECTRICAL PRODUCTS AND ENSURE
ADEQUATE MEASURES ARE TAKEN TO
MECHANICALLY SUPPORT FIXTURES AT
ALL TIMES.

Caution, risk of electric shock

The light source and other
electronic components
contained in this luminaire
shall only be replaced by
Elumeros or an approved
service agent.

Technical Support

Elumeros
25A, Little Boyton Hall Farm,
Boyton Cross, Chelmsford,
Essex CM1 4LN, UK

T [phone]
F [phone]

[e-mail]

User Manual version 1 | page 6
Elumeros.com | Specification subject to change without notice

3. Mounting Product

The Colour Combat MP can be mounted in any orientation to a flat, non-flammable,
structurally sound and capable surface. The fixture should be mounted away from
flammable materials, whilst also allowing adequate airflow over and around the
fixture at all times.

The Colour Combat MP weighs approximately 17.5Kg and as such the fixings and
mounting surfaces should be able to support this weight, and that of any wind
or other shear forces. There are 3 convenient holes in the fixture bracket for use
when fixing to a surface, which can be used to mount the fixture in any position.
Remember, this product is designed to be aimed in a direction in accordance with
a lighting design, therefore provision needs to be made for its angular adjustment
and care should be taken that the installation environment allows for the adequate
tilting of the fixture.

Please refer to Fig. 1, which shows the fixture and its mounting holes. When fixing
to any surface, fixings should be made through holes A (left), B (centre) and C
(right). It should be noted that installation onto certain supporting structures may
require different fixing methods, please contact Elumeros support for assistance.

IT IS VITALLY IMPORTANT FIXING SIZES AND THE TYPE OF FIXINGS ARE SPECIFIED
AND APPROVED BY AN APPROPRIATELY QUALIFIED AND COMPETENT PERSON!

The Colour Combat MP comes supplied with a safety fixing accessory (wire) for use
when mounting above ground (see Fig. 2). This safety wire must be affixed to the
fixture using the anchor hole as indicated to the right with the wire itself attached
to an appropriate load bearing anchor that corresponds to the weight of the fixture
with additional weight bearing capacity for any other forces that may be apparent.

The yoke of the fixture (which allows for its tilt) can be adjusted using a tool. There
is a convenient angular dial to assist with the tilt degree of the fixture. The screw
is indicated as shown (see Fig. 2). Care should be taken to not over tighten these
screws, and similarly care should be taken to ensure the screws are not over
loosened when the tilt is being adjusted.

The Colour Combat MP can also be installed onto a vertical post top with an
appropriate pole mount adaptor as shown to the right with fixings as indicated
(see Fig. 3). Please note that due to the weight of the Colour Combat MP, the pole
cannot be installed upside down in a hanging position, it must only be installed
vertically.

Please consult our technical support team for assistance with selecting the
appropriate type of pole, flange/base plate and accessories before using this
method of installation.

Note that this installation guide is limited to the installation of the fixture and the
electrical connection therefore before installing the product, it is recommended
to consult with an appropriately qualified and competent engineer to ensure the
correctness of the intended installation method.

- All fixings must be corrosion resistant.

- Separation washer(s) must be installed between any part of the fixture and
mounting surface(s).

- Avoid mounting the fixture in direct contact with other types of metal, as this
can cause galvanic corrosion. Care should be taken to ensure all fixings and
metal contact points will not cause galvanic corrosion. For guidance, please
contact Elumeros support.

A B C

Adjustable tilt

Safety fixing
accessory
(wire)

Pole bolts

Pan control
bolt

Main bolt

Fig. 1

Fig. 2

Fig. 3