Eltako TF-UTH User Manual

Tap-radio® clock thermo hygrostat
TF-UTH

TF-UTH Tap-radio® clock thermo hygrostat

Wireless clock thermo hygrostat with display pure white glossy for single
mounting 84x84x14/33mm or mounting into the E-design switching
system. With adjustable day and night reference temperatures and relative
humidity. Illuminated display. Preset ready to operate. Approx. 7 days
power reserve.
Home sensor.

Up to 60 timer memory locations are freely assigned to the channels. With date and
auto matic summer/winter time change over.

The wireless clock thermo hygrostat sends a message to the Eltako wireless network every
50 seconds when there is an actual temperature change of minimum 0.3°C or a change in
humidity of 5%. A change in reference temperature or relative humidity is sent immediately.
If there is no change, a status report is sent every 10 minutes. Queries of a wireless small

actuator FKS which are received approximately every 10 minutes will be answered imme­diately.

Settings are made with the buttons MODE and SET and can be locked.

The display illumination goes on by pressing on MODE or SET.
20 seconds after you last press MODE or SET, the program returns automatically to normal

display and the display illumination goes off.
A complete switching programme is preset and can be very easily changed.

The factory setting for night temperature is 18°C.
Mounting over a 55mm switch box. 14 mm over and 33 mm into the box. 230V power supply

terminals on the rear.

Power supply 230V.

Only 0.5 watt standby loss. Smart

professional series

Recommended retail prices excluding VAT.

TF-UTH

Wireless clock thermo hygrostat with
display pure white glossy

EAN

4010312317327

90,20 €/pc.