Eltako TF-LGTF User Manual
Tap-radio® CO2+temperature+humidity sensor
TF-LGTF
TF-LGTF Tap-radio® CO2+temperature+humidity sensor
Wireless CO2+temperature+humidity sensor,
mounting
84x84x17mm or mounting into the E-design switching system.
pure white glossy for single
With LED display according to the ambient air quality with warning signal
at level red. Power supply 230V. Standby loss only 0.4 watts on average.
Smart Home sensor.
The sensor measures air quality, temperature from 0 to 51°C and humidity from 0 to 100%.
equivalent and the total volume of all volatile organic compounds in the room air are
A CO
2
measured to evaluate air quality.
We recommend stainless-steel countersunk screws 2.9x25mm, DIN 7982 C, for screw
connections. Both with rawl plugs 5x25mm and with 55 mm switch boxes. Set of 2 stainless-steel countersunk screws 2,9x25mm and plugs 5x25mm are enclosed.
Within 2 minutes the color of the LED may change potentially according to the indoor air
quality: lights up green when air quality is OK; lights up yellow when air quality is average;
flashes red when air is contaminated.
In operation a warning signal at level red sounds every 3 minutes for 5 times.
After connecting of the power supply a teach-in telegram is sent, then at a change of at least
5% the data telegrams will be sent within 60 seconds. If nothing changed a status telegram
is sent after 10 minutes. The sending of the telegrams is displayed by one flashing of the LED.
The correct actual temperature is measured only about 30 minutes after connecting the supply
voltage due to the temperature compensation of the electronics.
professional series
Recommended retail prices excluding VAT.
TF-LGTF
CO2+temperature+humidit y sensor EAN 4010312318560
82,70 €/pc.
Loading...