Eltako TF-DTB55 User Manual

Tap-radio® wireless rotary switch
TF-DTB55

TF-DTB55 Tap-radio® wireless rotary switch

1-way wireless rotary switch pure white glossy, for single mounting
80x80x25mm or mounting in the 55mm switch system.
With batteries

All Eltako wireless dimmers can be controlled by this wireless rotary switch, and also the
wireless switching actuators TF61L, TF100L and FSR61.

To teach in the wireless rotary switch in the actuators, pull off the rotary knob and the front
panel. Press and hold the mini pushbutton (LRN) which is then accessible and briefly press
the rotary knob shaft.

The power supply is an internal 3V CR2032 button cell and has a service life of several
years.

To replace the button cell, just remove the front panel and the rotary knob.
Mounting: Screw on mounting plate. Then snap on the frame, remove the battery insulation,

plug on the rotary knob and snap on the front panel.
Use the sleeves in the 55mm socket box for screw mounting.
We recommend stainless-steel countersunk screws 2.9x25mm, DIN 7982 C, for screw

connections. Both with rawl plugs 5x25mm and with 55mm switch boxes. Set of 2 stain­less-steel countersunk screws 2.9x25 mm and plugs 5x25mm are enclosed.

Only in combination with dimmers: the minimum brightness can be adjusted in 3 levels with
a jumper as well as the soft on function.

(lifetime 2-8 years). Smart Home sensor.

private series

Recommended retail prices excluding VAT.

TF-DTB55

Wireless rotary switch

EAN

4010312318263

59,90 €/ pc.