Eltako TF-BSB55 User Manual

Tap-radio® motion sensor
TF-BSB55

TF-BSB55 Tap-radio® motion sensor

Wireless motion sensor pure white glossy for surface mounting
80x80x27mm
time 3 years)

The factory setting switches off taught-in light actuators and dimming actuators automatically
if no motion is detected for 5 minutes. Switch-on is by means of the light pushbutton.

Place a jumper in 'active' position to enable automatic motion-dependent switch-on.
We recommend stainless-steel countersunk 2.9x25mm, DIN 7982 C, for screw connections.

Both with rawl plugs 5x25mm and with 55 mm switch boxes. An adhesice foil and a set of
2 stainless-steel countersunk screws 2,9x25mm and plugs 5x25mm are enclosed.

The wireless sensor can be taught-in into the tap-radio
TF-TA65D, TF- TA55L, TF-TA55D, TF100L and TF100D.

or mounting in the 55mm switch system. With battery

. Smart Home Sensor.

®

actuators TF61L, TF61D, TF-TA65L,

(life-

private series

Recommended retail prices excluding VAT.

TF-BSB55

Wireless motion sensor

EAN 4010312318300

73,50 €/pc.