Eltako TF-BPL User Manual
Tap-radio® blisterpack switching
TF-BPL
TF-BPL Tap-radio® blisterpack switching
Blisterpack switching with tap-radio® wireless pushbutton TF-1FT and
®
tap-radio
light actuator adapter TF100L-230V. Smart Home sensor and
Smart Home actuator.
TF-1FT: 1-way wireless flat pushbutton for single mounting 84x84x16mm or mounting into
the E-design switching system. Generates the power for wireless telegrams itself when the
button is pressed, therefore there is no connecting wire and no standby loss.
Wireless pushbuttons with one rocker can send one evaluable signal. Press the bottom of
the rocker near the mark.
The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on
furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw
mounting.
TF100L-230V: Wireless light actuator adapter 10A/250V AC. 100x55x45 mm (measurements without plug), pure white. Impulse switch with NO contact. 230V incandescent lamps
and halogen lamps 1000W, ESL and 230V LED lamps up to 200W. Standby loss only
0.8 watt.
Adapter for German fused safety sockets with increased shock protection.
Using easy tap-radio® technology, up to 24 wireless universal pushbuttons, wireless direc-
tion pushbuttons, wireless central control pushbuttons as well as motion sensors TF-BSB
and TF-BHSB can be taught in.
private series
Recommended retail prices excluding VAT.
TF-BPL
Blisterpack switching
EAN 4010312317358
104,20 €/pc.
Loading...