Eltako TF-BPD User Manual

Tap-radio® blisterpack dimming
TF-BPD

TF-BPD Tap-radio® blisterpack dimming

Blisterpack dimming with tap-radio® wireless pushbutton TF-1FT and
tap-radio® universal dimming actuator adapter TF100D-230V. Smart
Home sensor and Smart Home actuator.

TF-1FT: 1-way wireless flat pushbutton for single mounting 84x84x16mm or mounting into

the E-design switching system. Generates the power for wireless telegrams itself when the
button is pressed, therefore there is no connecting wire and no standby loss.

Wireless pushbuttons with one rocker can send one evaluable signal. Press the bottom of
the rocker near the mark.

The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on
furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw
mounting.

TF100D-230V: Wireless universal dimming actuator adapter. 100x55x45 mm (measure­ments without plug), pure white. With power MOSFET. 230V incandescent lamps and halo­gen lamps up to 300W, 230V LEDs up to 100W.

No inductive (wound) transformers. With children‘s rooms and snooze function. No minimum
load. Standby loss only 0.7 watt.

Adapter for German fused safety sockets with increased shock protection.
Using easy tap-radio® technology, up to 24 wireless universal pushbuttons, wireless direc-

tion pushbuttons, wireless central control pushbuttons as well as motion sensors TF-BSB
and TF-BHSB can be taught in.

During teach-in, the dimming actuator can be set to phase control to permit optimum dim­ming for various LED lamps.

private series

Recommended retail prices excluding VAT.

TF-BPD

Blisterpack dimming

EAN 4010312317365

122,30 €/pc.