Eltako TF61P-230V User Manual

Tap-radio® repeater
TF61P-230V

TF61P-230V Tap-radio® repeater

1- and 2-level wireless repeater 45x45x18mm. Only 0.8 watt standby
loss. Smart Home repeater.

Supply voltage 230V.
This repeater is only needed if the building conditions prevent undisturbed reception or the

distance between the wireless pushbutton and receiver is too far.
The 1-level mode is activated ex works. Only wireless signals from sensors are received,

tested and retransmitted at full transmit power. Wireless signals from other repeaters are
ignored to reduce the data volume.

The second level mode can be activated by an internal jumper on the circuit board: turn off
the power, open the cover (press smoothly the closing stripes), connect the jumper on both
pins, close the cover and switch on the power. Then the wireless signals from sensors and
from another 1 level repeater are processed. A signal may therefore be received and amplified
twice.

Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless
sensors within their reception area.

professional series

Recommended retail prices excluding VAT.

TF61P-230V

Wireless repeater EAN 4010312318157

49,90 €/pc.