Eltako TF-4FT User Manual

Tap-radio® wireless pushbutton
TF-4FT

TF-4FT Tap-radio® wireless pushbutton

4-way wireless pushbutton pure white glossy for single mounting
84x84x16mm or mounting into the E-design switching system.
Generates the power for wireless telegrams itself when the button is
pressed, therefore there is no connecting wire and no standby loss. Smart

Pushbutton with rocker

Pushbutton with double rocker

Home sensor.

The scope of supply comprises a rocker and a double rocker.

Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up
and press rocker down. Wireless pushbuttons with double rocker can transmit four evaluable
signals: press two rockers up or down.

The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on
furniture using the enclosed adhesive foil. Use the sleeves in the 55 mm socket box for screw
mounting.

The double rocker is snapped onto the wireless module at the factory. If the double rocker is
replaced by the large rocker, remove the rocker halves by pulling off to the front. Do not bend
towards the middle. Then snap the large rocker so that the markings 0 and I on the back line
up with the same markings on the wireless module.

private series

Recommended retail prices excluding VAT.

TF-4FT

4-way wireless pushbutton

EAN

4010 312317105

35,90 €/ pc.