Eltako MiniSafeREG User Manual

Smart Home control unit DIN rail mounted
device MiniSafe REG

MiniSafe REG Smart Home control unit DIN rail mounted device

The MiniSafe REG as Smart Home control unit receives EnOcean signals from many Eltako sensors

and
actuators and permits highly encrypted access, both internally and externally, with the Eltako Wireless
Building app GFA4 by smartphone or tablet. Smart Home controller.

MiniSafe REG connected to the local network via Ethernet. The intended use of the MiniSafe REG is the bidirectional communication
with EnOcean wireless signals over Ethernet (TCP/IP).

Scope of supply: MiniSafe REG, wireless antenna, wall adapter power supply, 1x ethernet cable 2m RJ45, 2x DIN rail adapters,
quick start guide, instruction for down loading the app GFA4.

Specifications: P r oc es so r: I nt e l X1021, me m or y: 1 GB D DR 3 RA M + 4 GB e M MC, L A N : 1x 10/10 0 Mbi t et he r n e t, integrated
EnOcean-868 MHz wireless module (TCM310) ESP3, power supply 5V, plastic housing pure white glossy, dimensions:
165x70x35mm with slots for wall mounting and feet to put down, weight: 175 grams.

The IP configuration is performed via the app GFA4 from the Android app store or Apple app store.
The enclosed small antenna can be replaced with a wireless antenna FA250 with magnetic base and cable.
Can be mounted on an DIN rail DIN-EN 60715 TH35 with the DIN Rail adapters for the long holes, 10 pitches wide. Instead of the

adapter plug, the DIN-rail power supply HDR-30-5 can be used. The special 5 V connection cable is already mounted.

professional series

Recommended retail prices excluding VAT.

MiniSafe REG

Smart Home control unit
DIN rail mounted device

EAN 4 010 312319017

308,80 €/pc.