Elster Solutions WWIC3EVM Users Guide

Modular EA_Gatekeeper 3G integrator’s guide

PG42-2017A

General

This leaflet explains how to properly install the modular EA_Gatekeeper 3G into approved Elster
devices. The modular EA_Gatekeeper 3G has the following configurations:

Description Model number

EA_Gatekeeper 3G, EV-DO, internal WAN antenna EA_NMGK3_EVV

EA_Gatekeeper 3G, EV-DO, external WAN antenna EA_NMGK3_EVXV

EA_Gatekeeper 3G, UMTS, internal WAN antenna EA_NMGK3_UA

EA_Gatekeeper 3G, UMTS, external WAN antenna EA_NMGK3_UXA

Integration instructions

To properly install and integrate the modular EA_Gatekeeper 3G into the approved Elster device, refer
to the Elster drawing: 5D26132.

FCC Compliance

Important

The modular EA_Gatekeeper 3G complies with Part 15 of the FCC Rules. Changes or modifications not
expressly approved by Elster could void the user's authority to operate the equipment.

EV-DO FCC & IC Information

• FCC ID: QZCWWIC3EVM

• IC: 4557A- WWIC3EVM

UMTS FCC & IC Information

• FCC ID: QZCWWIC3UM

• IC: 4557A- WWIC3UM

Modular EA_Gatekeeper 3G integrator’s guide 2

Compliance Statement

This device complies with Part 15 of the FCC Rules and Class B digital apparatus requirements for ICES-

003. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation of the device.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules and ICES-003. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

• reorient or relocate the receiving antenna

• increase the separation between the equipment and the receiver

• connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• consult the dealer or an experienced radio/TV technician for help

If you experience trouble with this equipment, please use the Return Material Authorization (RMA)
feature available from Elster by visiting the customer support section of www.elstersolutions.com. Do
not attempt to repair this equipment yourself.

Antenna Compliance

The modular EA_Gatekeeper 3G has been tested and certified with the internal antenna(s) and external
antenna(s) provided by Elster. The internal antenna(s) must not be modified or replaced.

Caution

The antennas used for these transmitters must be installed to provide a separation of at least 20 cm
from all persons and must not be collocated or operated in conjunction with any other antenna or
transmitter except as documented in the FCC application. These devices have been approved for
simultaneous transmission of the collocated EA_LAN and cellular/PCS transmitters. Users and installers
must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.