![](/html/07/07fd/07fd47aec1a004790b7a80f5ae3f8e5da449ea963369ef817aaf6b3d37165710/bg1.png)
1213B
GAS PRESSURE REGULATOR
GENERAL INFORMATION
The American Meter 1213B pressure regulator is designed for natural gas
applications and features a compact, lightweight design for fast, easy
installation. Interchangeable orifices and springs provide a wide range of outlet
pressures and flow rates. Outlet pressures between 3.5" W.C. and 5 PSIG are
available. Operating temperature range is -20° F to 150° F (-30° C to 65° C).
The diaphragm case may be easily removed for routine inspection without
disturbing the line connections. All models conform to ANSI Code B31.8c-1994,
and CGA Service-type Regulator Specification CAN/CGA-6.18-M95.
Each 1213B regulator is equipped with a high tensile strength cast iron valve
body that rotates in 90-degree increments and features extra heavy wall
thickness. This provides maximum strength to withstand installation stresses
without damage and prevents thread galling experienced with aluminum.
1213B regulator valve bodies are treated with a 5-step metal finishing process.
The treated metal is then primed with an epoxy paint and finished with a tough
vinyl acrylic topcoat.
For available valve body sizes see table 1.
APPLICATION
The 1213B features a full capacity internal relief valve with large passages to
assure the fast release of gas. For added protection, a secondary relief valve
stop is provided to assure operation under the most severe conditions and in
the event the seal plug has been removed. The standard relief spring setting is
7.0" W.C. above the normal 7" W.C. outlet pressure. The relief point for a 2 psig
q Compact and lightweight
q Full capacity internal relief
q Die cast aluminum body
q Corrosion resistant finish
q Suitable for natural gas and propane
q ¾” threaded vent
q Maximum flowrate 1300 SCFH
q Maximum inlet pressure 125 psig
q Outlet pressures: 5” WC to 5 psig
o 5” – 9” WC
o 6” – 12” WC (standard)
o 9” – 15” WC
o ½ - 1 psig
outlet spring is 1.6 psig above the outlet pressure.
Valve body configuration permits the 1213B regulator to be supplied in four
positions. All 1213B regulators are available with either right angle (90-degree)
or straight flow (180-degree) valve bodies. Vents can also be supplied in four
different positions.
The 1213B regulator is designed with an extra large, removable weather and
bug-proof stainless steel screened vent to resist freeze-ups and to exclude
foreign matter. The vent is threaded 3/4 inch NPT making it suitable for indoor
installations. The regulator vent opening should face downward to minimize the
chance of blockage from ice and snow. If not, a 90-degree vent elbow (Part
number 78041P025) and separate protective screen (Part number 70400P017)
may be screwed into the vent to provide the necessary protection.
o 1 – 2-1/2 psig
2-1/2 – 5 psig
Table 1: Valve Body Sizes
2010 Farallon Drive, San Leandro, CA 94577
Tel: 510-352-9040 ° Fax: 510-352-2307
P.O. Box 1298, Issaquah, WA 98027
Tel: 425-392-4620 ° Fax: 425-557-0384
![](/html/07/07fd/07fd47aec1a004790b7a80f5ae3f8e5da449ea963369ef817aaf6b3d37165710/bg2.png)
1213B RESIDENTIAL SERVICE REGULATOR
GAS CAPACITY TABLES
1/2” x 1/2” 3/4” x 3/4”
Inlet
(PSIG)
1
2 160 200 260 260
3 165 185 240 260 250
5 225 220 275 285 240
10 275 250 335 310 250
15 255 250 345 270 250
25 250 235 285 285 220
35 285 235 335 285
50 285 325 380
60 315 420 380 355
75 435 425 370 365
1/8 1/8 x 3/16 3/16 1/4 5/16
155 180 180
Size of Orifice
290 335
(7” WC OUTLET)
(PSIG)
245
Inlet
1/8 1/8 x 3/16 3/16 1/4 5/16
1
2 180 250 260
3 150 175 250 320 330
5 200 225 325 400 450
10 300 320 425 500 650
15 390 420 550 600 800
25 500 525 700 750 1000
35 600 650 1000 1050
50 800 900 1000
60 800 900 1000 800
75 800 900 1000 750
170 180
Size of Orifice
900
700
100 500
125
390
1“ x 1”
Inlet
(PSIG)
1
2 190 250 260
3 150 175 250 320 330
5 200 225 325 400 450
10 300 320 425 500 650
15 390 400 550 600 800
25 500 525 700 750 1200
35 600 650 1000 105
50 800 900 1000
60 1000 1000 1000 800
1/8 1/8 x 3/16 3/16 1/4 5/16
170 180
Size of Orifice
900
1200
100 800 900
125 800 900
800
Pressure Spring Recommedations
Outlet Pressure Part Number
5 to 9” w.c. 70017P003
6 to 12” w.c. 70017P065
9 to 15” w.c. 70017P004
1/2 to 1 psi
1 to 2-1/2 psi 70017P040
2-1/2 to 5 psi 70017P041
Orifice Sizes
Orifice Size Part Number
5/16” 72494P022
75 1000 1000 1000 800
100 1000 1200
125 1000 1200
For optimum performance use above black line.
800
1/4” 72494P021
3/16” 72494P020
1/8” 72494P019
1/8” x 316” 72494P030