ELPRO VE02ALT, VE05ALT, VE02ALR Quick Manual

1

VGA & Stereo Audio CAT5 Extender With Chainable Output

ITEM NO.: VE02AL, VE05AL, VE02ALR

VE02AL, VE05AL is designed for VGA +Stereo Audio signal over cost effective CAT5 cable to
instead of VGA and Audio cable. VE02AL receiver built in chainable output to cascade the other
receiver for working range over 300 meters. It is optimum video performance under long cable
run and perfect for multiple monitor display.

This AV Extender is the smart, fast and cost-effective, eliminates costly and bulky VGA and Audio
cable and the most efficient way to move multimedia content from player to display. Used in
pairs, the VGA & Audio Extender is used in Shopping malls, public address systems, airports, train
& bus station, boardrooms, trade shows, computer based training application.

VE02AL 1 in 3 Out VGA with Stereo Audio CAT5 Extender Distribution Amplifier –

Chainable Function

 Extends VGA and stereo audio over one UTP CAT5 cable.
 Each set including one piece VE02ALT transmitter and one piece VE02ALR receiver.
 Support analog stereo audio.
 Digital transmission on analog stereo audio for sound undistorted.
 Supports up to 1920x1200 @60Hz.
 Long range transmission up to 300 meters (Max.)

 Dual output: 1 VGA loop output for local, plus 2 x CAT5 RJ45 output for remote side.
 Built in equalization, gain adjustment, chainable CAT5 output at remote unit.

 Remote unit could be daisy chained to another VE02ALR receiver to extended working

range over 300 meters and multiple displays.

 Local unit VE02ALT local output: supports DDC、DDC2、DDC 2B,and provides virtual DDC, DDC

backup function, to avoid wrong setting at high resolution/frequency and cause remote monitor
unable display.

 Application for airports, train & bus stations, window display, trades shows, exhibitions.

VE05AL 1 in 5 Out VGA with Stereo Audio CAT5 Extender Distribution Amplifier -

Chainable function

 Each set including one piece VE05ALT transmitter and one piece VE02ALR receiver.
 Dual output: 1 VGA loop output for local, plus 4 x CAT5 RJ45 output for remote side.
 Each VGA display equipment request one VE02ALR receiver at remote side. (Order separately).
 Use CAT5 cable instead of VGA cable.
 Long range transmission up to 300 meters (Max.).

 Built in equalization, gain adjustment, chainable CAT5 output at VE02ALR remote unit.

 Supports up to 1920x1200 @60Hz.

Option Model:
VE02ALR VGA with Stereo Audio CAT5 Receiver– Chainable function

 Work with VE02ALT, VE05ALT as receiver for extra remote VGA display equipment.

 It could be daisy chained for another VE02ALR to extended working range over 300

meters and multiple displays.

 Built in equalization, gain adjustment.
 Supports up to 1920x1200 @60Hz.

2

Panel View:

VE02ALT

VE05ALT

VE02ALR

View of installation:

RJ45 Define:

Link Cable (TIA/EIA-568-B )

1. Orange-white Red +

2. Orange Red -

3. Green-white Green +

4. Blue Audio -

5. Blue-white Audio +

6. Green Green -

7. Brown-white Blue +

8. Brown Blue –

VE02ALT

/VE05ALT

LED:

Blue (front panel): power on/off

RJ45 LED (Link cable connector):

Green: status (Refer the below)
Yellow: status (Refer the below)