ELPRO HotBox Datasheet
UniUni
Uni
UniUni
vv
v
vv
erer
er
erer
sal Dasal Da
sal Da
sal Dasal Da
HOTBOX SE
ta Lota Lo
ta Lo
ta Lota Lo
gg
g
gg
gg
g
gg
erer
er
erer
Universal data logger for signals:
2 channels: NTC temperatures -50°.. +140°C
2 channels: Signals 4mA .. 20mA
2 channels: DC voltages, programmable +/- ranges
(DC ranges programmable for Hygroclip humidity and
temperature sensor)
Out of the 6 channels any 4 channels can be selected
to record the data.
Easy configuration, 64’000 of measured values, large
display , sensor supply by Datalogger , alarm possibility
etc. Evaluation software: elproLOG WIN.
Ideally for the autonomous recording of any measured
value of a sensors or a signal transmitter:
- Pressure in a process
- CO2 concentration in the environment
- gas concentration as O2 or others
- electrical data as current or voltage
- temperature
- humidity and temperature combined
- speed of air in a conduct
- depth of water in a river
- force applied to a probe
- or any combination
Supply of the sensors is done by the HOTBOX SE,
using internal batteries or a net supply , controlled by a
special power save procedure.
software: elproLOG WIN
HOTBOX SE with different sensors
HOTBOX SE
Features of data logger
Autonomous Measuring, Recording
Displaying, Alarming
HOTBOX SE, the new data logger from the Swiss
company ELPRO, is the ideal device for recording
process data. It is simple to operate, easy to handle
and can be adjusted quickly to suit all required
measurement applications. It is possible to connect:
2 temperature sensors, 2 probes with 4..20mA and
2 sensors with DC voltage signals. The large display
shows the values measured by the sensor, in the unit
of measurement selected by the customer, periodically
and independent of the storage cycle. Any 4 channels
can be selected for recording the measured data in the
memory which has a capacity for 64,000 data points.
Y ou can display recorded dat a at any time in the form
of a graph on the PC.
Mobile Use for Service and Installation
Technicians
easy handling
1. choose the sensor
2. configure
3. recording
4. analyse
easy configuration:
To each sensor the
exact settings are
provided.
For example, high pressure 0..30 bar, low pressure
0..10 bar and 2 temperatures –50°C to + 140°C for inflow and return-flow are recorded. Or the speed of air
flow in m/s is shown in conjunction with temperature
and air humidity . This simplifies system optimization
methods and system acceptance report procedures.
Customer sensors can also be connected to the
device (screw clamps)
Sensor supply by internal batteries
The brilliantly designed sensor supply and the energy
saving mode allow you to use the device without an
external energy supply for the sensors. A simple
installation procedure allows you to create reliable
documentation for processes in clean room
atmospheres and test chambers. Differential pressure
0...100 Pa together with temperature and air humidity
are the most important quantities. Or , outdoors in a
watertight box, it is possible to record the depth of
groundwater or streams in conjunction with climatic
values. Or, it is import ant to record and provide
documentation about the air quality in large
auditoriums. In incubators it is possible to record CO2
values in conjunction with °C and %rH.
Alarms and easy evaluation of the data
Any sensor can be programmed to trigger an external
alarm. ElproLOG the uncomplicated evaluation
software displays measured values in the form of
graphs and allows for many additional functions and
the implementation of all ELPRO dataloggers. The
motto, one software for all ELPRO dataloggers,
simplifies documentation in connection with ISO quality
assurance or GLP applications.
Loading...