Page 1
Elpas Lone Worker Transmitter
P/N: 5-LW241020-0, 5-LW241037-0, 5-LW240020-0, 5-LW240057-0
User Guide
www.elpas.com
Page 1 of 6
V1/March 2015
Introduction
CAUTION! Reasonable effort was made to ensure that the specifications and other information in this guide are accurate and complete at the time of its
Product Description
The Elpas Lone Worker Transmitter is a personal duress button device with optional
pull cord and fall detection capabilities. The LWT is designed for real-time monitoring
and tracking of staff members and visitors. The LoneWorker Fall Detect Transmitter is
designed both for seniors in assisted living facilities or work place staff members that
may be subject to attack or injury in high-risk environments.
Alarms may be triggered either by squeezing the two side buttons. In the Fall Detect
version, when worn on a belt, a short rip cord may be attached to a belt loop so that
an alarm is transmitted when the device is pulled off the belt.
Note: Users can also wear the LoneWorker Transmitter as a pendant using a lanyard. If you
choose to do so, make sure you use a lanyard for which, the force required to unlatch the tether
switch is less than the force required to open the clasp.
The pull mechanism is particularly useful for seniors with arthritis who have difficulties
pressing buttons.
The LoneWorker Fall Detect Transmitter also detects falls and alarms when tilted
horizontally. To prevent false alarms, the device indicates a pre-alarm by giving the
wearer a chance to cancel the alarm before it is transmitted by pressing on the front
cancel button.
(Actual product may vary from photo)
Button press or pull cord should be used as the primary means of calling for help even
after a fall. The fall detection is meant to alert in the event that the victim falls
unconscious and may not trigger if not sufficiently horizontal.
LWT based help call systems may be monitored by Elpas ELC controllers and/or by
Eiris Software. Elpas Low Frequency Beacons or IR readers may be used to provide
room level indoor location.
Outputs on all Elpas network devices may be used to drive sirens, strobe lights or PA
systems. Alerts may be sent to various handheld devices such as DECT handsets
using Eiris DECT interfaces or to IOS or Android smartphones using EirisGo apps.
Calls may be cleared by exposing the LWT to a responder’s handheld LF beacon
requiring that staff arrive at the location of the caller.
The same Elpas infrastructure used for the duress solution may also be leveraged for
Access control, Asset tracking, Attendance and intrusion alarming making Elpas one
of the most competitive comprehensive solutions available today.
Page 2
Elpas Lone Worker Transmitter – User Guide
www.elpas.com
Page 2 of 6
V1/March 2015
Emergency Call Button Events
Factory Default: B1=0 (Button Up)
Activation/Emergency Call (LoneWorker Panic event): Pressing both buttons, simultaneously, for at least 1 second or pulling the cord
(in the Fall Detect version) is - B1=1 (Button Down) and last LF location, 6 RF messages, 3 for B1 Down and 3 for last LF, are transmitted
(each @ 4ms in duration), 312.5ms apart.
Upon button release, B1=0 (Button Up), 3 RF messages are transmitted (each @ 4ms in duration), 312.5ms apart.
Alert Testing (LoneWorker Test event): Pressing either button alone, B1=1 (Button Down), 3 RF messages are transmitted (each @ 4ms
in duration), 312.5ms apart.
Upon button release, B1=0 (Button Up) 3 RF messages are transmitted (each @ 4ms in duration), 312.5ms apart.
Product Specifications
RTLS Technologies
IR (800nm) RF (433MHz) LF (125KHz)
RF (Motion/Stationary)
Supervision messages every 30secs /60secs
IR (Motion/Stationary)
Supervision messages every 5secs /60secs
RF under LF
6 RF transmissions (each transmission
@ 4ms in duration), 312.5ms apart
IR under LF
Does not transmit
Event Messages
Button Press/Release
Low Battery
3 RF transmissions (each transmission
@4ms in duration), 312.5ms apart
Power Source
CR2450 Lithium Battery
Battery Life
18 to 36 months, depending on usage
LED Status Indicator
Button Press/Release, Motion/Stationary
Entering/Exiting LF Field, Low Battery
Badge ID
Unique, factory-programmed ID
Construction
Nylon Plastic (IP65)
Dimensions (H x W x D)
8.3 x 4.4 x 1.7 cm (3.3 x 1.7 x 0.7 inches)
Weight
40 grams (1.4 ounces)
Mounting
Belt worn
Operating
Environment
Temp: -30°C to 70°C (25°F to 159°F)
Humidity: 95% non-condensing
Management Software
Eiris V4.8 or higher
Regulatory
IC, FCC & CE compliant
Warranty
1 year limited (excluding battery)
Product offerings and specifications are subject to change without notice.
Ordering Information
5-LW240020-0
LoneWorker Transmitter, RF/LF
5-LW240057-0
LoneWorker Fall Detect Transmitter, RF/LF
5-LW241020-0
LoneWorker Transmitter, IR/RF/LF
5-LW241037-0
LoneWorker Fall Detect Transmitter, IR/RF/LF
Accessories
5-PBA90003
CR2450 Lithium Battery (tray of 25pcs)
5-LW009800-0
Belt Clip – 5 units
5-LW009700-0
LoneWorker Pull Cord – 5 units
5-LWA90002
LW Enclosure Replacement Kit (set of 5)
Page 3
Elpas Lone Worker Transmitter – User Guide
www.elpas.com
Page 3 of 6
V1/March 2015
Initial Activation & Software Enrollment
The Lone Worker Transmitter is shipped from the factory in
Sleep Mode to conserve battery power during transit.
1. Prior to initial usage, remove the Activation Label and then
press, simultaneously, both of the emergency call push buttons
for at least 7 seconds.
This action Awakens the Transmitter from Sleep Mode and also
enrolls its unique factory installed ID Number (a six-digital
hexadecimal value) into the Host RTLS Application.
If the Enrollment process is successful, the Red LED
Status Indicator of the transmitter lights up for 3 seconds.
(Refer to your Eiris Configuration Guides for additional details.)
Battery Replacement
1. Temporarily suspend usage of the Transmitter in the host
RTLS application.
2. Place the transmitter on its right side. Remove the 2 screws
that hold the battery cover to the body of the Transmitter
3. First time replacement: Utilize the pull tab (find it with the
Bat▼ mark engraved on the back) to slide the battery out of
the Transmitter.
Future replacements: In the absence of the pull tab,
remove the cover from the other side, and use a plastic
instrument to slide the battery out.
Dispose of the used battery in accordance with local
regulations.
CAUTION! After removing the battery please wait at
least 30 seconds before installing the replacement battery
so as to not cause damage to the tag or to negatively affect
the tag’s operational performance.
4. Slide the new battery into the transmitter.
IMPORTANT! Ensure that the positive (+) side of the
battery faces up.
5. Close the side-cover(s) such that the screw holes are
correctly aligned. Tighten the 2 screws snugly into place. Do
not over-tighten as this may strip the case threads.
6. Reactivate the Transmitter in the Host RTLS Application.
Safety Issues
It is the responsibility of the system installer to ensure that the
appropriate staff members are suitably trained in the usage and
maintenance of the Lone Worker Transmitter.
Additionally, Supervisory Alerts should be configured in the Host
RTLS Application to notify staff members that the detection
Transmitter is:
In a low battery condition, or
Not properly transmitting location and status data.
Note: The above configured Supervisory Alerts should be triggered
periodically to ensure system integrity.
Alert Testing
When you press either the left or the right emergency call pushbutton individually, you trigger the Lone Worker Transmitter to emit
a Test Alert Message for the host RTLS application to confirm that
the unit is functioning properly.
Page 4
Elpas Lone Worker Transmitter – User Guide
www.elpas.com
Page 4 of 6
V1/March 2015
RF Transmissions in LF Fields
For Moving Transmitter
LF Response Time: Onboard LF receiver polls every 250ms to check if the Transmitter is in an LF zone
Transmission Rate: 3 RF event transmissions (each transmission about 2ms in duration), at 0.4 second intervals.
If the Transmitter stays in an LF zone, then repeated at 2 seconds intervals.
Transmitted Message Type: RF Data Message includes ID code of LF Beacon. Motion bit, M=1.
For Motionless Transmitters
LF Response Time: Onboard LF receiver polls every 250ms to check if the Transmitter is in an LF zone
Transmission Rate: 3 RF supervision transmissions (each transmission about 2ms in duration), 0.4 seconds apart:
If the Transmitter stays in a LF zone for more than 10 minutes, then repeated at 15 second intervals.
Transmitted Message Type: RF Data Message includes ID code of LF Beacon. Motion bit, M=0
Cleaning & Disinfection Procedures
Use an appropriate antibacterial disinfectant such as Dispatch® Hospital Cleaner Disinfectant with Bleach from Caltech Industries
(http://www.caltechind.com) to clean the Lone Worker Transmitter.
Since ‘Cleaning Procedures’ may vary according to facility guidelines, thus the procedures given below are for illustrative purposes only:
Option 1 – Using Dispatch Disinfectant Spray
1. Lightly wet a disposable towel with Dispatch spray.
Do not saturate the towel
2. Wipe the outer surfaces of the sensor
3. Wipe the sensor with a dry disposable towel
4. Allow the sensor to air dry
5. Return the clean sensor to inventory or usage
6. Dispose of used towels per facility policies
Option 2 – Using Dispatch Disinfectant Towels
1. Open a new Dispatch pre-moistened towel
2. Wipe the outer surfaces of the sensor
3. Wipe the sensor with a dry disposable towel
4. Allow the sensor to air dry
5. Return the clean sensor to inventory or usage
6. Dispose of used towels per facility policies
Alert Event Configuration in Eiris
There are nine alert events relevant to the Lone Worker tag.
LoneWorker Fall Alarm (Fall Detect version only): When the
tag tilts and the Pre Alarm event is not cancelled within 15
seconds, the tag transmits the LoneWorker Fall Alarm which
indicates that the user has fallen and unable to function.
LoneWorker Front Button Press: In regular version, B2
down. In Fall Detect version, to cancel an alert event, the
user can press the button in the front of the tag. To cancel a
Pre Alarm event, the user can place the tag in the up-right
position. If the tag is repositioned, it transmits the Cancel
(cancel the Pre Alarm) alert event.
LoneWorker Panic: When under duress, the user can press
both of the side buttons, simultaneously, or pull the cord to
transmit a LoneWorker Panic event.
LoneWorker Pre Alarm: When the tag tilts, it transmits a
Pre Alarm event and starts to vibrate. The pre Alarm and
vibration last for 15 seconds during which, the user can
cancel it.
LoneWorker Pull Cord Restore: When the user inserts
the cord back into place, the tag transmits a cancellation
for the Pre Alarm event.
LoneWorker Single Side Button: To test the alerts, the
user can press either of the side buttons to transmit a
LoneWorker Single Side Button event.
Low Battery: When the battery of the tag runs low, it
transmits a Low Battery event.
Motion: When the tag is in motion, it transmits a Motion
event.
Stationary: When the tag is stationary, it transmits a
Stationary event.
Page 5
Elpas Lone Worker Transmitter – User Guide
www.elpas.com
Page 5 of 6
V1/March 2015
Users can configure all or some of these alert events in one alert object, the Elpas Badge Alert object.
Note: This document includes only the LoneWorker Transmitter alert event specific instructions. For further information regarding alert configuration, see Eiris
Configuration Guide, section 5.
To configure LoneWorker alerts:
1. In the EV2 setup mode, Right-click the Alerts branch and select Add by Type. The alerts Add Object window opens.
2. Select Elpas Badge Alert and click Add. A new Elpas Badge Alert object is created and opens in its General tab.
3. In the Name field, enter the name you choose (one that includes LoneWorker is recommended since the object is also used for
other badges).
4. Open the Inputs tab.
5. Under the Events pane, from the Filter drop-down list, select LoneWorker. The LoneWorker related events appear in the
Events pane.
6. Select the check-boxes of the events for which you want the alerts.
Page 6
Elpas Personal Safety Bracelet – User Guide
Page 6 of 6
V1/March 2015
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it.
If you are discarding this product and not returning it for repair then you must ensure that it is returned as identified by your supplier.
This product is not to be thrown away with everyday waste - Directive 2002/96/EC Waste Electrical and Electronic Equipment.
Compliance with Standards
Th i s de v i c e co m plies wit h FCC R ules P a rt 15 and with In dust r y Cana da lic ense
ex e mpt R SS st a ndard( s). Ope ration i s su bject t o two condi t i ons:
(1 ) Thi s d ev ice m a y no t caus e har m f ul int e rfere n ce
(2 ) Thi s device m ust accep t any i nterf e r ence t hat ma y be r eceived or th at may
ca u se un d esir e d oper ation.
Le pr é sent app a reil est con f orme aux CNR d ' Indust rie Canad a appl i c ables a u x
ap parei l s r adio e x empts de lic e nce. L'ex p loita t ion est a u t orisé e aux deux c o n diti o n s
su i v ante s :
(1 ) l'ap p arei l ne do i t pas produ i re de b roui l l age, et
(2 ) l'u t ilisat e ur d e l'a p parei l doi t acc e p t er t o ut b r ouill a ge r a dioél e ctriq u e sub i ,
mêm e si l e br o u illag e est s u scep t ible d ' en co m prom ettre l e fon c tionn e m ent.
NO T E : This eq uipmen t ha s been te sted and fo u nd to c o mply wi t h the limits fo r a
Cl a ss B digita l dev ice, pursu ant to Part 1 5 of th e FCC Rules. Thes e limits are
de signed to prov ide rea s o nabl e protec t i on a g ainst harm f u l in t erfer ence in a
re sident i al in s t allat i on. T hi s eq u ipmen t gene r ates, u ses a n d can r adiat e radi o
fre quen c y ener g y and, i f n ot inst alled a nd use d i n acco r dance with th e inst ruct i ons,
may c ause ha r m f ul inte rfere n ce to radi o c o mmunica tions. H o wever , t here is no
gu arant e e t hat inte r f eren c e w ill not oc c ur in a parti c ular in stallat i on. If thi s
eq uipmen t does ca u se h armful in terf e r ence to radio or telev i s ion re c epti on, which
ca n b e dete rmine d by turni n g t h e equ i pment off a nd on, th e u s e r is en cour a g ed to
tr y to c orrec t the i n terfer e nce b y one or mor e of t he fol l o wing measu r es:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Ce t équi p ement a é t é test é et jugé c on fo rm e aux l im it es s ’ap pl iq ua nt à un ap p arei l
numéri q u e de cl a sse B, co nform émen t à la Parti e 15 de s rég l ement a tions de la
FC C. Ces limite s ont été élab o rées pou r of f rir une pr otect i on raison nable co n tre
le s int e r f eren c e s n u i sibl e s dans une i n stall a tion r ési d e ntill e .
Cet équi p ement génè r e, utili z e et p eut ém et tre de l ’éne r gie de f réqu e nce radio et, s’ il
n’ es t p as i ns ta ll é et utili z e conf o rmémen t aux i nstr u ctions du fa brican t , peut
pr ovoqu e r de s inter f é r ence s da ngereu ses pour le s communi catio n s ra dio. To u tefoi s ,
ri en ne g ar ant it l ’ab se nc e d ’i nt erf ére n ces da ns un e in s t allat i on pa rticu l i é re. S i ce t
éq uipem e nt prov o que d es i n terfére nces nu i sibl e s au n i v eau de la r écept i on r a dio o u
te l evisi o n, ce qu i p eut ét r e deter m i ne pa r l a m ise ho r s, pu i s sous t e n sion d e
l’éq uipm e n t, v o us ét e s i nvite à essa y er d e c o rrige r l e s i n t erfer e nces en p r egna n t l e s
mes ures s uivan t es:
Réo rient e z ou d é p la ce s l ’a nt en ne ré ceptr i c e.
Au gment e z la d i stan c e qui s é p ar e l ’é q uipem e nt et le r écep t eur.
Br an ch ez l ’é quipe m ent à u ne pr is e d ’u n c ir cu it di ff er en t d e c elu i a uq uel e st
br a nché l e réc e pteur .
Co n sulte z le r e v e nde u r ou u n t echni c ian r a dio/te l evisi o n exp éri m e nté p o ur
ob te ni r de l’ ai de .
Wa rning !
Ch anges or mod i f icat i ons to this equi pment not ex p ressl y ap p roved by the pa rty
re sp on sib le f or c om pl ian ce ( El pa s S ol ut io ns Lt d. ) co ul d vo id th e us er ’s au th or it y to
op erate t he eq uipment .
Eu r ope
Th i s e quipm e nt compl i e s with the RTTE requ i remen t s - D irec t iv e 1999/ 5 /EC of the
Eu r opea n Parl i ament a nd of t he c o unci l of 9 M arch 1 999.
EN 3002 2 0, EN 30148 9 , EN 5 0130-4, EN 6 1 0 00-6- 3 , EN 6 0 950- 1.
Product Warranty
El p as So l ution s , Ltd. ( El pas or t he Co mp an y), and i ts a ff il ia tes , wa rr ant s it s pr od uct s (h er ei na ft er re fe rr ed to a s "t he P ro duc t” ) to b e fr ee of d ef ec ts i n m a t erial s and work m ansh i p
un der nor m al oper a ting cond i tions a n d use for a p eriod o f o ne year f r om the d ate of shi pment by Elpa s . T he C om pa ny’ s ob li ga ti ons sha ll b e li mi te d wit hi n th e wa rr an ty pe ri od , at
it s o ption, t o repa i r o r t o r e plac e t h e d e f ecti v e P roduc t o r a n y d efecti v e c ompo n e nt or part ther e of. To exerc i s e t his war r a n ty, the prod u ct must be retur n ed t o the manuf a ctur e r
fre i ght p repa i d and i n sure d .
Th i s warra n ty does not apply to repai r s o r r eplac e m ent cause d b y i m prope r i n stal l a tion , P r o duct misu s e, f ailur e t o f ollow i n s tallati o n or opera t i ng inst r uctio n s, alter a tion, abuse,
ac cident , ta m peri n g, re pair by anyon e ot h er th an El p as, exter n al causes, an d fai l ure to perfor m re q uired pr e v e ntiv e mai n tena n ce. This warr a nty al so does not appl y to any
pr o duct s , a ccesso ries, or attac h m ents used in conj u ncti o n wit h t he Produ ct, inclu ding batt eries, whi c h s hall be cover e d solel y by thei r o w n w arran t ies, if any. Elpas sha l l n ot be
li a ble for an y damag e or loss wh atsoev e r, whet h er dir e ctly, ind irect l y, inci d e ntal l y , conse q uent i ally o r other w i se, r e sulti n g from a ma l f unc t i on o f th e Produ c t due to pr oduct s ,
ac c essor ies, o r att a chment s of ot he rs, i nclud i n g bat t eries , used in co nj unct i on wi t h the P rodu c t .
EL PAS MAK E S NO EXPRE S S W ARRA NTIES EXCE PT THOS E S T ATED IN THI S S TATEME NT. ELP A S D ISCLA IMS ALL OTHE R W A RRAN TIES, EXP R ESS OR IMP L I ED, INCL U DING
WIT H OUT LI M ITATI O N IMPL I ED W ARRA NTIE S O F M ERCH A NTABI LIT Y A ND F IT NE SS F OR A PA RT IC ULA R PU RP OS E. E LPA S’ S S OL E R ES PON SI BI LIT Y FO R W AR RA NT Y
CL AIMS I S LI M I TED T O REPA I R OR T O REP LACE A S SET FORTH I N TH I S ST A T EMENT .
El p as shal l have no l i a bilit y f o r any deat h , perso n al inju r y, prope rty dam a g e, or other l o s s whet h er direc t, indir e ct, inc i denta l , c onse q uenti a l , or othe r wise, b a sed on a clai m t hat
th e Prod u ct fai l ed to f u ncti o n. Howe v er, if Elpas i s hel d liabl e, whet h er di r ectly o r indir ectly , f or any l oss o r damag e ari si n g unde r this l i m ited warra n ty or o t herwi s e, regar dl ess o f
ca u se or ori g i n, the c o mpany ' s maxi m u m liab i lity sha l l b e limit e d to the p urcha s e price o f t he Pr o d uct, whi c h shal l b e f ixed as l i q uida t e d dam a g es and n o t as a pena l ty, an d s hall
be the c omple t e and exclus i v e lia bility of El p as.
El p as sh all no t , under a ny ci r cumst a nces w h atsoe v er, be liabl e for a n y inac c urac y , error of jud gment , defau l t, or n e glige n ce of El pas, i t s e m ploye e s, of f i c ers, a gent s , or any other
pa rty, or of the pur c hase r or us er, arisi n g from any ass i stan c e or commun i cati on of any k i nd regar ding t h e co nfigu r ation, de sign, ins t allat i on, or c r e ation of se c urity sy stem
in v o lving the P roduc t , tha t bein g the r e sponsi bility of th e purc h aser o r use r . If E l pas i s unab l e to m ake s uch re p air or repl ac em en t, th e co mp any ’s e nt ir e l ia bi li ty sh al l be l i m i t ed t o
th e cost of a r eason a ble sub stitut e prod u ct. El pas s h all no t be r e spon si ble f o r any disman tling , inst a llati o n , rei n stall a tion , purc h a sing, shipp i ng, i n suran c e, or a ny si m ilar c har g e s.
El p as sh all ha v e no l i abil i t y for any da m ages, inclu ding withou t limi t ation , any d irect , i ndi r e ct, i n cident a l, sp e cial , or con seque n t i al d amages , expen ses, c o sts, p rofit s, lost savin gs
or e a r ning s , or other dama g e s ari sing o ut o f t he use of t he Produ c t or the remov a l , i nsta l lation , r einst a llati o n , repai r o r r ep lacem e nt of the Prod u ct or any relat e d e v ents . I n t he
ev e nt th at the r e is a ny li a bility agai n st El p a s, su c h lia bility shall be li m i t ed t o the p urcha s e pri c e of t he Pr o d uct w hich a mount s hall b e fixed as l i quida t ed da m a ges.
Th e purc h aser a nd us e r und e r stan d t hat t h i s Pro duct m a y be c ompro m i sed o r ci r c umven t ed by i nten t i onal a cts; t h at t h e Prod u ct wi l l not i n all cases preven t dea t h, perso n al in j ury,
pr o pert y da m age, or ot h er loss res ultin g fro m burgl a ry, robb e ry, fire or ot h er cause s; and that th e Pr oduct wi l l no t in all case s pr ov ide ade q uate wa r ning or pro t ection . The
pu r chase r and us e r also u n derst a nd that a proper ly inst a l led an d m aint ai ned alar m may redu c e the r i s k of even t s suc h a s bur g l ar y, rob b ery, and f i r e wi t h o ut war n i ng, b u t i t is no t
in s uranc e or a guaran t ee t h at su c h event s wi l l not o ccur o r tha t ther e will be no d eath, perso nal i n j ury, p r oper t y dam a ge, o r othe r loss a s a resul t of su c h even ts.
By pu r chasi n g th e Pr o duct , the pur c h a ser and user sha l l de f end, inde m nify and h old Elpas , it s of f i cers, d i r ecto r s, af f iliat e s, s ubsi d i aries , ag e nts, serv a nts, empl o y ees, and
au t hori z e d rep r e sent a tives h armles s from a nd aga i nst a n y and a l l clai m s, su i t s, co s t s, da m ages, a nd jud gment s incurr e d, cl a im ed, o r susta i ned wh ether f o r deat h, per s o nal in j ury,
pr o pert y damag e , or other w i se, be cause of or i n any way r elat e d to t he c onfigu r ation , desi g n, i n stal l ation, or c r eation of a secur i ty sy s tem i nvolv i n g t he P r oduc t , and the use ,
sa l e, di s tribu t ion, a nd i nst allat i o n of t h e Pr o d uct, includ i ng pa y ment o f any and a l l a t to rn ey’ s fe es , c os ts , an d e xp en se s i nc ur re d a s a re sul t of a ny su ch e ve nt s.
Th e purcha s er or user shou l d f ollow t he Prod u ct inst a l l ation a nd opera tion inst r u ction s a nd test t h e Produc t and the ent i r e s ystem at lea s t once each w e ek. For variou s r easo n s,
incl uding b ut no t limite d to c h ange s in en v i ronm e ntal c ondit i o ns, e l ectri c , elec troni c , or el e ctrom a gneti c disru ptions , and t am pering , the P roduc t may n ot per f orm as expe c t ed. T h e
pu r chase r and u ser a r e ad v i sed t o take all n ecessa r y pre c autio n s for the p r ote ction a nd sa f ety o f per s ons an d prop erty.
Th i s st a t emen t provide s ce r tain l e gal r i ghts. Other right s m ay v ary by st ate or c ount r y. Und er cer t ain c i rcum sta n ces, s ome st at e s or count ri es m a y not allow exclusi on or l i mitat i on
of i ncid e ntal o r con s equen ti al d a m a ges o r impl i ed wa rrant i e s, so t he ab o v e ex c l u sion s may not a p ply un der t h o se c i rcumst ances and i n those stat e s or c o untr i e s .
El p as re s erves t he r i g ht to m odif y this st atem e nt at a ny ti m e , in i t s sol e disc r etion witho u t not i c e to a ny pur c haser or use r . Howev e r, th i s stat ement s hall n ot be m odif i e d or v a ried
ex c ept by E l pas in wr i ting, a n d Elpas d oes no t autho r i ze any s ingle i n dividu al to ac t on its beha lf to mod i f y or v ary t his st at e m ent . A ny ques ti ons
ab out t h i s stat ement shoul d be di r ected to El p as.
Loading...